59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x L-Connector 1.5 mm x 1000 mm
1 x Double conector with JR adapter and 200 mm extension
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x ABS angle 3,0x3,0x1000 mm
1 x CC 03
1 x Smoke set "S"
1 x 2,4x1000 mm 2:1 green termoretract tube
2 x ABS tube 9.0x8.0x1000 mm
1 x 1,2x1000 mm 2:1 red termoretract tube
2 x ABS tube 3.0x2.0x330 mm
1 x Balsa panel 10x100x1000 mm
1 x Horn 6/27 with M3 Bearing
1 x Horn 5/15 with M2 Bearing
1 x Horn DUBRO 1/2A
1 x B4-0 rocket charges (6 pcs)
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x Glases Stratus
2 x Glases Nimbus "Black"
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Horn 20x28,5 mm (2 pcs)
1 x Horn 5/20 with M2 Bearing
1 x SE Ring 200 mm (2 pcs)
1 x Oracover Brown 2 m
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x ABS tube 12.0x10.0x1000 mm
1 x Brass control horn M4 short for wire (4 pcs)
1 x Electric rocket starters (6 pcs)
1 x Spikes Band (5 m)
1 x ABS tube 7.0x5.0x1000 mm
2 x Balsa panel 8.0x100x1000 mm
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Monokote ROJO misil (1.8x0.65m)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x 5 mm M2 variable inclined horn
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Screwdriver for Hexagon 1,27mm
1 x Copier 5x20 cm pcs
1 x 
1 x Screwdriver for Torx® TX6
1 x Vacuum pump 12 CFM
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Digital precision scale up to 2000 g
1 x Extractor piñones 2.3/3.2 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x VIPER SL Gold PNP 2270 mm
1 x Extension PVC 150 cm (Graupner)
1 x Fuselage Bags JEEMO
1 x MB339 Freece PNP 1790 mm
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Prolongador S-Bus JR/JR 10cm
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Round Rod 1,0x1000 mm
1 x PC-21 2.880 mm SINGAPUR scheme
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x XICOY X45 rail
1 x Long pinned hinge (6 uds)
1 x Premium servo extension 25cm
1 x 200 mm extensión servo HITEC/JR
1 x Cabel "Y" 30 cm (Futaba)
1 x FELIX SportJet Red/Yellow 2200 mm
1 x Gates hinge aluminium (1 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x PC-21 2.880 mm (w/o oracover)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 30 cm male (Futaba)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Set stickers JEEMO "Andy"
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Extension 30 cm (Futaba)
1 x ABS Strip 1.5x3.0x1000 mm
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Horn mando small (2 pcs)
1 x Hitec 46 mm servo arm with ball link
1 x Hitec 30 mm servo rounded arm
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x ABS tube 3.0x2.0x1000 mm
1 x Futaba 46 mm servo arm with ball link
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Glases Aspen
1 x Pulley brass 5/1,5 (2 pcs)
1 x Pulley brass 16/2 (2 pcs)
1 x Cable coupler M2x66 (2 uds)
1 x 6 mm M3 variable horn
1 x Servo SAVOX SA-128S SG
1 x Cable with accesories
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Servo SAVOX SV-1260 MG
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x SAVOX SH 1290 MG servo digi
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Horn 16,5x20 mm (2 pcs)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 20 mm carbon horn
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Gear for D 200 BX
1 x ABS tube 8.0x7.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
1 x Futaba 20 mm servo arm
1 x ABS tube 18.0x16.0x1000 mm
1 x Futaba 2x20 mm servo double arm
1 x ABS tube 4.0x2.0x1000 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Hitec 25 mm servo arm with M3 ball link
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Futaba 30 mm servo rounded arm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x HITEC 17 mm servo arm with ball link HITEC
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Futaba 25 mm servo arm with M3 ball link
1 x ABS tube 14.0x10.0x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x Gear for D 54
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Rudder tandem for two Futaba servos
1 x A/C quality beech plywood 600x300x6.0 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Birch plywood plate 600x300x2.5 mm
1 x Balsa panel 2.0x100x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Balsa panel 2.5x100x1000 mm
1 x Servo Dymond D 37 Eco
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Hitec 20 mm servo arm
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x ABS tube 8.0x6.0x1000 mm
1 x Futaba 17 mm servo arm with ball link HITEC
1 x ABS tube 2.0x1.0x1000 mm
1 x Horizontal servo holder
1 x ABS tube 9.0x7.0x1000 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x 46 mm Futaba servo arm tandem with ball link
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Lite Plywood panel 600x300x2.0 mm
1 x FUTABA 20 mm servo arm with ball link
1 x ABS tube 7.0x6.0x1000 mm
1 x Hitec 38 mm servo arm with ball link
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Futaba 30 mm servo arm with M3 ball link
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Balsa panel 1.5x100x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Adapter rotula M3
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x A/C quality beech plywood 600x300x0.6 mm
1 x HITEC 20 mm servo arm with ball link
1 x Glases Ace
1 x Glases Flitemaster
1 x Glases Nimbus
13,918.56EUR
Manufacturers
Languages
Español English
Currencies