21.55EUR

3l Smoke oil
[SMZ0007]


This oil was designed for use with smoke systems. It is particularly suitable because its point of evaporation is very low and therefore requires to work lower temperatures than other products. Moreover, extends the life of the smoke system thanks to its formulation.

On the other hand, its low viscosity (<7mm2/sec) causes the pump to have to make less effort to move it and battery consumption is reduced.



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Conector Servo female 4 pines
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x 1/12 Pilot "Cougar"
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x 1/6 Pilot "John"
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Universal Colour Paste white 50 g
2 x Foaming agent for epoxy resins 200 g
1 x Cross Connector 4.0 mm x 1000 mm
1 x 2 mm male connector (2 pcs) with safety connector
1 x Epoxy 5min KAVAN 2x 100g
1 x Profile ABS Square 4 x 1000 mm
1 x Screws flush mount M2
1 x Oracover Yellow CADMIO 10 m
1 x Nut M1,6
1 x Battery plate
1 x Side Plate
1 x Head core bushing
1 x SE Ring 480 mm (2 pcs)
1 x Rotorhead pushrod
1 x Actuador lineal HLS12-100210-7.4v
1 x Rotorshape Elevator
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Gates hinge black 30x16 mm (2 pcs)
2 x 
1 x Extractor piñones 2.3/3.2 mm
1 x Cable Cargador FUTABA
1 x 2,0x50 mm allen screwdriver
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Horn 5/10 with M2 Bearing
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Dust collector for mould cleaning
1 x Hexagonal ball head 2.0 x 50 mm
1 x Starter Sullivan-STAR 601
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Hysol Mixing Caps SET with 10
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Adapter lead MPX/EC3
1 x Green silicone 0,25 qmm wire (50 m)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Vacuum pump 12 CFM
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Starter Sullivan-STAR 603 DINATRON
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Premium servo extension 25cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Truck-trailer for gliders 720 x 285 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Paint gun for sprays
1 x ABS angle 3,0x3,0x1000 mm
1 x Release wax 250ml
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Piloto Jet "Green" 1/6 Scale
1 x Conector BEC male (10 pcs)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Ball joint long
1 x Wheel keeper washer
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Head runner
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Foil for sticking flaps and ailerons
1 x Blades 330mm
1 x SE Ring 200 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Copier 5x20 cm pcs
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Ball Link Plier
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x White silicone 0,25 qmm wire (100 m)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x resin-hardener L-385 H-385 (625 g)
1 x SlowFlyer control horn (3 pcs)
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Starter EM Gear Power 80
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn 5/20 with M2 Bearing
1 x Horn 5/15 with M2 Bearing
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Screwdriver for Torx® TX6
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Micro flex hinge (12 uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Steering arm 12 mm Ø 4 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 800TVL CMOS camera for FPV
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
2 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Parachute expulsion foam
1 x Remote electric ignition system
1 x Field folding model stand
1 x Propeller balancer
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Extension lead 15 cm Multiplex
1 x Green smoke canister 140 g
1 x 3 blades set
1 x Flat Connector 4.0 mm x 1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Piloto jet 130 mm
1 x Connectors banna oro 3,5 mm (M/F)
1 x Painting GHT Lexan Black 150 ml
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Pilot "Goose" (Slimline)
1 x Pilot JAN 1/4 Saiplanes
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Plasti Dip Liquid Tape 429 ml black
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x XH female balance (2S) connector (2 pcs)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 16 mm x 1000 mm
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Connectors banna oro 4 mm (M/F)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x 1/6 Pilot "Cindy"
1 x Connector CAN 15
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 1/10 Pilot "Jimmy"
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x 1/7 Pilot "Japanese"
2 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Piloto JET 1:3,5
1 x 1/6 Pilot "Tony"
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna gold 5,5 mm (M/F)
1 x Spannlack 1000 ml
1 x Hobbylite Filler, Balsa colour
1 x Digital scale up to 40 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fiber rod 14 mmx1000 mm
1 x Washer 2.2×4
1 x Baering 3x8x4
1 x Oracover White 2 m
1 x Tail boom
1 x Oracover Orange 2 m
1 x SE Ring 360 mm (2 pcs)
1 x Ply-Span 450x600/13g White
1 x Raer wall
1 x Nut M2 securing
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Bearing housing
1 x Ply-Span 450x600/13g Orange
1 x Side rudder
1 x Oracover light Grey 2m
1 x SE Ring 450 mm (2 pcs)
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover Black 2 m
1 x Head core
1 x Spikes Band (5 m)
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x SE Ring 240 mm (2 pcs)
1 x Blade holder center
1 x 
1 x Rotor Mast
1 x Bearing 3x6x2,5
1 x ORACOVER Fluor red (2 m)
1 x SE Ring 250 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Screw M3x16
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x Oracover Red 2 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover ROYAL RED 2m
1 x Tape GFK 38 mm
1 x Steering lever
1 x Oracover Yellow CUB 10 m
1 x Oracover GREY Seafire Sea 2m
1 x Ply-Span 450x600/13g Blue
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Oracover Yellow CUB 2 m
1 x Oratex Natural White 2m
1 x Oratex Natural White 20m
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Servo Fork
1 x Screws M1,6x6 Allen
1 x Oratex Red Fokker 10 m
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ORACOVER transparent Yellow (10 m)
1 x Oracover Azul Cielo 2 m
1 x Blade holder upper
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Tape GFK 50 mm
1 x ORACOVER Ferrari red (2 m)
1 x Tail support (2 pcs)
1 x Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x Small aluminium horn gold (2pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x PPM Encoder Module
1 x Horn 13,5x16 mm (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 3,0x60 mm allen screwdriver
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x MPX-Dean "T" Adapter
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Epoxy 40 min (Resin). 5 Kg
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Ferrita con funda
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Epoxy 30 min. 200g
1 x Stickers-digit for marking
1 x Cap closure 33/23.5mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Hardener Aero EPH 161 (250 g)
1 x Covered closure or fairings
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x APM2.6 Power module with 5.3V DC BEC
1 x Ferrita 14x8x5.5 mm
1 x 100m servo "Premium" wire (white/red/blue)
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Epoxy 40 min (Hardener). 10Kg
1 x Z Bender - S Type Tool
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x 30 cm BEC cable (male)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x 3 LiPo XH>EH adapter
1 x Mould Resin P 10 kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Hardener P-25, canister 2.5Kg
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Electric spoiler 250 mm (2 pcs)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Epoxy 40 min (Resin). 25Kg
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Cabel charger transmitter GRAUPNER
1 x Circlick securite
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x CC 01
1 x Screwdriver for Torx® TX8
1 x TrainerCord (master-learner)
1 x Hot Glue Stick RED
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x PIX Hawk with accesories
1 x Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x CC 02
1 x Black silicone 0,25 mm² wire (25 m)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Epoxy 40 min. 4kg (Hardener)
1 x 
1 x Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x 2 LiPo XH>EH adapter
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x resin-hardener package L-385 with hardener H-385
1 x CC 03
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Starter 12v (Max 90 and 15ccm)
1 x Cockpit plastic closing
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Crimping tool
1 x 6 mm aluminium horn with patella
1 x Battery charging cable XT60
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Hardener Aero EPH 161 (500 g)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Horn 6/27 with M3 Bearing
1 x Locking cable tie 3.2x142 (uds)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Mixers smoke bombs AX-60 (5 pcs)
13,928.07EUR
Manufacturers
Languages
Español English
Currencies