65.50EUR

Initior Receiver FRX2 Wireless
[IISIRCFRX2]


The FRX2 is the autonomous ignitor with it’s own power supply. It is switched on automatically as soon as you connect a smoke cartridge or an ignitor. 2 LEDs show the battery voltage at power up, and indicate reception and ignition status. They also indicate an error case (e.g. due to short circuit). After succesful ignition, the FRX2 is switched off automatically.

The FRX2 will be paired automatically with your FTX2 when you switch it on the first time. After that, bindings can be modified or added using the Cockpit V2 or the PCARD.

Without further modifications, the FRX2 ignites at the first switch activation after being armed.

Features:

-Programmable ignition sequence number
-Contains battery, switch and charging circuits
-The FRX2 delivers the necessary energy to ignite a pyrotechnical ignitor. Compatible with most of commercially available ignitors and cartridges.
-Short circuit proof - try it!
-1S LiPo, >100mAh for over 50 ignitions
-Operating time: greater than 4h
-Charge the battery at any standard USB charger or PC.
-Zero Standby Power: Does not discharge during longer periods of non ussage. Charge / discharge it to about 3.8V if you plan to not to use it for a longer time
-Frequency: 433MHz, compatible with the IISI System
-No interference with your 2.4GHz radio system!
-Software Updates possible with Cockpit V2

Wireless smoke cartridge and fireworks ignitors

For all pilots who want to pimp up their presentation with smoke or fireworks, without the hassle of cables and connectors. Specially for large gliders, installing cables through the wing is often difficult or impossible - IISI has the solution for this!
Security first: The cartridges are only fired, when the pilot really wants it (and not already on the ground, since the switch is already in the “on” position).
You can use multiple ignitors at the same time, and define if they will ignite in a sequential manner or all together - controlled by the pilot’s radio - with one switch.
The owners of the Cockpit V2 can display the ignition state on the screen.
The transmitter (FTX2) is connected to your receiver on a free channel, that’s it. Place one or more ignitors (FRX2) e.g. at the wing tips, on the bottom, etc. That’s all you need to do - no further installation needed to impress your public with great smoke effects!
No cables, no connectors, no hassle.
Binding is easy: the FRX2 recognize themselves your FTX2 when you power it up the first time. With the PCARD, you can set the ignition sequence number, and you can add up to 8 other FTX2 to your FRX2! This allows to use them on different models, without re-binging.
Every FTX2 has it’s own identification, so multiple systems can be used together without issues.



temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x PIX Hawk with accesories
1 x PPM Encoder Module
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Tube Pitot to PIXHAWK
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x SE Ring 200 mm (2 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x SE Ring 330 mm (4 pcs)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
2 x Xplorer1 anemometro
1 x Tape GFK 38 mm
1 x 
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x Xplorer2 anemometro
2 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x 20x1000 mm Ring Strap Back To Back
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Stickers-digit for marking
1 x White smoke canister 65 g
1 x "M" set
1 x Parachutist
1 x Red smoke canister 65 g
1 x Yellow smoke canister 100 g
1 x White smoke canister 140 g
1 x Initior Receiver FRX2 Wireless
1 x White smoke bombs AX-18 (5 pcs)
2 x Green smoke canister 100 g
2 x Remote electric ignition system
1 x 3l Smoke oil
1 x Ventral support for AX-18/AX-60
1 x Blue smoke canister 100 g
1 x Yellow smoke canister 65 g
1 x Green smoke canister 65 g
1 x Smoke set "Glider"
1 x White smoke bombs AX-3 (10 pcs)
1 x Red smoke canister 140 g
1 x White smoke bombs AX-60 (5 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x AX-60 starters (5 pcs)
1 x PCARD Wireless System
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Green smoke canister 140 g
1 x Black smoke bombs AX-60 (5 pcs)
2 x Parachute expulsion foam
1 x ABS angle 2,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Strip ABS 2.0x8.0x1000 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x Glider PIROL
1 x Fox 4000 mm Airworld,cabina
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x Glider KNIRPS
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Support FUEL DOT V3
1 x Support XT60 conector (2 pcs)
1 x Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x Fiberglass plate 620x540x0,3 mm
1 x Foam plastic plates (310x210x8 mm)
1 x Fiberglass plate 350x150x1.5 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x X-RAY Micro QR
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x Chili Race F3K (aramid nose)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x 120x60 mm SLH KOVO wheel
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Foil for sticking flaps and ailerons
1 x Yellow smoke canister 140 g
1 x AX-60 starters (5 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Motor Advance 50-6
1 x F-16 Scale 1:6 (1.630mm)
1 x F4E Phantom Scale 1:7
1 x Bags wings/rudder ASPIRE
11,760.39EUR
Manufacturers
Manufacturer Info
IISI-RC
Other products
Languages
Español English
Currencies