145.00EUR

Jet Afterburner Simulator NF-Jet3 RY
[NF-Jet3]


The NF-Jet3 module serves to simulate flame on the output of the jet engine unsing red and yellow ulttra bright LEDs (Light-Emitting Diodes) 3 or 5 mm. The input of te module has to be connected in paralell with the engine controller. The intensity of the flame follows the power of engine. First color starts to light in the beginning of "gas" range. The second color starts on the middle fo the range. To increase the reality of the flame the light intensity chages in pseudo-rabndom period. The frequence of changes speeds up when increasing the engine power.

The module is connected to receiver by Graupner, Hitec type connector. The module can also be connected as an uncontrolled unit when disconnecting the cable to a receiver. In this case the light intensity is 100% (full gas).

The module has two outputs for light rings. Each output drives two colors. Usually the first color is red and the second one is yellow. The wires use the same colors system. The brown wire in the middle is ground. This is a common negative pole of LEDs (cathodes) for both colors.

The NF-Jet3 units are optimized to work with LEDs circles with a diameter of 105 mm and has 72 LEDs. The unit has two concentric circles. both circles can work from 7 to 12 V (10 to 12 is optimum). The modules has an over-current protection. The NF-Jet3 has a current limitation at 200 mA. Pretection circuits needs approx. 2V reverse, so the optimal conditions for unit are from 12 to 14 V (10xMiNH or 3xLiPo).
It implements Red-Yellow colors.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Propeller APC 14x8.5 Electric Pusher
1 x Hovercraft sailcloth
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Initior Transmitter FTX2 Wireless
1 x PCARD Wireless System
1 x White smoke bombs AX-3 (10 pcs)
1 x Carbon fiber rod 20 mmx1000 mm
1 x 
2 x Crimping tool
1 x 
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x 120x60 mm SLH KOVO wheel
1 x BALSA trip 10x10x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x BALSA trip 2.0x2.0x1000 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Presto SF Light Filler styrene-free (420 g)
1 x SUS wire 3m (nylon coated)
1 x SE Ring 450 mm (2 pcs)
1 x Tape GFK 38 mm
1 x Soporte grifo FESTO (2 pcs)
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Hobbylite Filler, Balsa colour
1 x Beech dowels 10 mm x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x 30 cm DEANS female connector
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oratex Natural White 20m
1 x Ferrita 17x10x6.5 mm
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x ORACOVER Fluor red (2 m)
1 x XH female balance (3S) connector (2 pcs)
1 x Oracover Verde 2 m
1 x Blind nut M5 (10 pcs)
1 x Oracover Red 2 m
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Blind nut M4 (10 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x 
1 x Adapter 3,2 mm M8
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Adapter 3,2 mm M6
1 x Allen wheel collar M3x3
1 x Adapter 5,0 mm M8
1 x LASER 73" 1.85m (05) PILOT
1 x 2,3 mm Prop Drive Günther M4
1 x Electron 22 mm Fitting barb
1 x 20-25mm Servo Arm
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Receptor CORE PBR-26XS 26ch
1 x Oracover GREY Seafire Sea 2m
1 x Yellow smoke canister 65 g
1 x Oracover Black 10 m
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Extension MPX-MPX 20 cm
1 x Refueling Cap V3 Black
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
2 x Waterproof adhesive tape, width 19mm, length 25m
1 x Prop Holder AXI 41xx V2
1 x Starter EM Gear Power 250
1 x 1000 cc gasoline fuel tank complet
1 x Recess mount-rem. glow plug set
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x 
1 x Starter EM Gear Power 80
1 x Extension Arm for Carburetor (red)
1 x Blue "FUEL VENT" round aluminum overflow socket
1 x double Fuel Dot V2 (silver)
1 x Compact on-board starting system (9713)
1 x DLE 55 carburetor
1 x Extra hard 250 ccm complete gasoline fuel tank
1 x GLOW 9C + accesories
1 x 280 cc gasoline fuel tank complet
1 x Vasa model Catapult
1 x DC Small for MultiLog & UltraLight
1 x MultiLog Altimeter
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x NF-2 RC set
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Oracover CHROME 2m
1 x Oracover Brown 2 m
1 x Oracover CARBON Metalic 1 m
4,854.89EUR
Manufacturers
Manufacturer Info
Night Fly
Night Fly Homepage
Other products
Languages
Español English
Currencies