151.25EUR

Jet Afterburner Simulator NF-Jet3 RYS
[NF-Jet3RYS]


The NF-Jet3 module serves to simulate flame on the output of the jet engine unsing red and yellow ulttra bright LEDs (Light-Emitting Diodes) 3 or 5 mm. The input of te module has to be connected in paralell with the engine controller. The intensity of the flame follows the power of engine. First color starts to light in the beginning of "gas" range. The second color starts on the middle fo the range. To increase the reality of the flame the light intensity chages in pseudo-rabndom period. The frequence of changes speeds up when increasing the engine power.

The module is connected to receiver by Graupner, Hitec type connector. The module can also be connected as an uncontrolled unit when disconnecting the cable to a receiver. In this case the light intensity is 100% (full gas).

The module has two outputs for light rings. Each output drives two colors. Usually the first color is red and the second one is yellow. The wires use the same colors system. The brown wire in the middle is ground. This is a common negative pole of LEDs (cathodes) for both colors.

The NF-Jet3 units are optimized to work with LEDs circles with a diameter of 105 mm and has 72 LEDs. The unit has two concentric circles. both circles can work from 7 to 12 V (10 to 12 is optimum). The modules has an over-current protection. The NF-Jet3 has a current limitation at 200 mA. Pretection circuits needs approx. 2V reverse, so the optimal conditions for unit are from 12 to 14 V (10xMiNH or 3xLiPo).
It implements Red-Yellow-Sunny White colors.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Crimping tool
1 x Cut tube
1 x Ball Link Plier
1 x Starter 12v (Max 90 and 15ccm)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Digital precision scale up to 2000 g
1 x Screwdriver for Hexagon 1,5mm
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Crimping tool
1 x Screwdriver for Torx® TX6
1 x Hot Glue Stick GREEN
1 x 2,0x50 mm allen screwdriver
1 x Starter Sullivan-STAR 601
1 x Dust collector for mould cleaning
1 x Screwdriver for Torx® TX8
1 x Hexagonal ball head 2.0 x 50 mm
1 x Starter Sullivan-STAR 603 DINATRON
1 x Z Bender - S Type Tool
1 x Vacuum pump P1-N
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Hot Glue Stick RED
1 x Jeti Black cap
1 x 
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Electric spoiler 250 mm (2 pcs)
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Glases Ace
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Innovation Plus
1 x Glases Nimbus
1 x Glases Nimbus "Black"
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Pilot "Goose" (Slimline)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x USB HLS prog. interface
1 x Adjustable launching hook
1 x ABS tube 9.0x7.0x1000 mm
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Motor KAVAN PRO 2225-1600
1 x Suncover 100cc Red
1 x Handle for PERMAGRIT lime
1 x Mini Infrared Thermomiter
1 x XT-60 Plug Mold
1 x Mold plugs XT-90
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Mold plugs XT-30
1 x Pistola termica MH 550 micro
1 x Propeller drill jig DA-35/50/60/70
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Jet Afterburner Simulator NF-Jet3 RY
2,898.88EUR
Manufacturers
Manufacturer Info
Night Fly
Night Fly Homepage
Other products
Languages
Español English
Currencies