69.00EUR

LightBox SR
[POWER6700]


LightBox SR

Product description
More and more pilots are keen to build models which are not only 100% true to scale visually, but also lack nothing in terms of working systems. Naturally these functions include a fully controllable lighting system which simulates every function of the full-size machine. The newly developed LightBox SR from PowerBox Systems can control different light sequences in your model, and is easy to set up using the Terminal PC interface, which is available at no charge. A PowerBox USB Interface is required, or a USB adapter from another manufacturer such as Multiplex or Jeti. The interface is child's play to operate, and provides the user with every option required to set up the airborne lighting system individually.
The system caters for landing lights, flashers, double flash, and simulated beacons, and even an afterburner control system. The intervals and burn times for the flashing light function are user-variable, as is the speed of rotation for the beacon. The switching point for all functions is also user-variable. Only one channel is required to switch the various lighting circuits on and off independently.
As you would expect, the LightBox SR is pre-configured in such a way that it can be used immediately, without any adjustment. Landing lights, two flashers and one beacon can be switched on and off by a PWM signal.
The special feature of the LightBox SR is, that it can also process serial signals! The LightBox SR is compatible with all current bus systems, such as Futaba S-BUS, Spektrum SRXL, HoTT SUMD, Jeti UDI, JR X-BUS and Multiplex M-Link. This means that it is also possible to control all four outputs using different channels - and all this with only one cable! The LightBox SR is very simple to incorporate into an existing bus system, and can be installed at any location in the model.
A further highlight is the power supply for the LightBox SR: the outputs can either be powered directly from the receiver, or from an external battery; In the latter case the input voltage range is from 2.5 V to 13 V. A special circuit is present which automatically switches over to the external power supply when an external battery is connected. The external battery can be left plugged in when the system is switched off: the external battery is switched to stand-by as soon as the RC system is turned off.
To ensure that safety also has priority, all outputs are fitted with special fuses. This is particularly important when power is supplied through the receiver, as the output must be isolated if a short-circuit occurs in a cable. The fuses automatically reset themselves when the overload is eliminated.
A further feature is a user-variable voltage threshold, which switches the lighting system off when the battery is almost depleted; this ensures that the battery cannot become deep-discharged.
Naturally the unit includes integral fail-safe detection which causes all connected outputs to flash continuously if the signal is lost.

Features
Four outputs, separately user-variable
Landing light, flasher, beacon and afterburner functions
Can be controlled via PWM or serial signal
User-variable switching thresholds
Fully configurable lighting functions
Simple PC interface
Can be used with different current USB adapters
Power supply from receiver or external battery
Stand-by circuit for external battery
Fuse-protected outputs
Low voltage power-off
Fail-safe function
Updateable

Technical Data
Operating voltage 4.0V - 9.0V
Power supply ext. Battery: 2,5 - 13,0 V
Current drain Power-on state 19mA
Current drain Standby 150μA
Maximum load current each output 1.1A
Signal input PWM, seriell
Supported RC systems Futaba, HoTT, JR, M-Link, Jeti, Spektrum SRXL
Channels 4
Dimensions 56 x 19 x 16 mm
Weight 22g incl. Patchwire
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Starter EM Gear Power 80
1 x Turbina KINGTECH K320 G5
1 x Extension MPX-MPX 20 cm
1 x Crimping tool
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x EXTRA NG 74" white/red/blue (Skywing RC)
2 x Motor DLE 170 M- Paramotors
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Silent-blocks DLE 170M
1 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 200cc Std
1 x Small Crow DLE-170M
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x ABS angle 3,0x3,0x1000 mm
1 x Pin hinge 26x11 mm (10 uds)
2 x Gates hinge 30x16 mm (2 pcs)
2 x Spinner NUT M8x1,25
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Horn 6/27 with M3 Bearing
1 x Profile ABS half cane 4x1000 mm
3 x SE Ring 300 mm (2 pcs)
1 x ABS angle 1.5x1.5x1000 mm
2 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x 100m servo "Premium" wire (white/red/blue)
1 x Medium pin type hinge (12 uds)
3 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Horn with ball 40x30
3 x Spinner NUT M5
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Flap hinge 33x9 mm (6 pcs)
1 x Foreman, scale 1:32
1 x Adjustable brass horn threaded M3
2 x Spinner NUT M10x1
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Cable set PREMIUM, fuselage/wing
3 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Decorative caps, multicoloured
1 x Distanzstück motor OS 120 AX
2 x Spikes Band (5 m)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x ABS angle 6,0x6,0x1000 mm
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
3 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x Foil for sticking flaps and ailerons
1 x Sun Cover PC 21 XXL (JMB Jets)
2 x Indoor Brushed motor kit
1 x 102 mm INO spinner (carbon imitation)
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Crystal Universal RX 35.020 Ch 62
1 x Tapa estado carga XT-60 (6 pcs)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x CC 05
1 x DPS Switch JR/JR
1 x Soporte grifo FESTO (2 pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Cabling for Fox MDM1 wings
1 x Soporte filtro FESTO (4 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x 89 mm INO spinner (carbon imitation)
1 x Connector CAN 15
1 x F3A carbon 95 mm spinner
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Propeller POWER-PROP 7x7
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Motor DLE 430 cc - Paramotors
1 x Silicone black 4,0 qmm wire (25 m)
1 x Silicone black 6,0 qmm wire (25 m)
1 x Silicone black 2,5 qmm wire ( 1 m)
1 x Long pinned hinge (12 uds)
1 x Spinner NUT M5
2 x Spinner NUT 1/4x28
2 x Spinner NUT M4
1 x Servo HITEC HS-325 BB
2 x SE Ring 450 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Battery RX JETI LiIon RB 2600 7.2v
2 x 20x200 mm battery rings
1 x SE Ring 240 mm (2 pcs)
1 x Servo AN-8 HBA
1 x XH male balance (3S) connector (2 pcs)
1 x MR30 connector female
1 x Micro Crystal RX 35.010 Ch 61
1 x Crystal Universal RX 35.140 Ch 74
1 x 2 mm male connector (2 pcs) with safety connector
1 x Conector XT-30 (macho)
1 x Conector XT-30 (hembra)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Ball link M1.6 (6 uds)
1 x Long ball link M2 (6 uds)
1 x Ball link M3 RPA's-UAV's
1 x XH male balance (8S) connector (2 pcs)
1 x USB Interface Adapter
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Silicone black 6,0 qmm wire ( 1 m)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Long pinned hinge (6 uds)
1 x Micro flex hinge (12 uds)
1 x Servo HITEC HS-225 MG
2 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x Servo HITEC D85 MG
1 x Servo HITEC D954 TW
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
2 x Spinner NUT M6
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Servo HITEC HS-45 HB
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HS-5565MH High Voltage
1 x Servo HITEC HS-5087 MH
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Spinner NUT M6
1 x Servo HITEC D625 MW
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC HS-45 HB, servo box
1 x Servo HITEC HS-125 MG
1 x Servo HITEC HS-5485 HB Digi
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC HS-5085 MG Digi
1 x Servo HITEC HS-225 BB
1 x Servo case HS-225MG/225BB/5245MG
1 x Servo HITEC D131 MW nano
1 x Servo HITEC HS-5084 MG
1 x Servo HITEC D941 TW
1 x Servo HS-5070 MH Hi Volt
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x Servo HITEC D645 MW
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Battery RX JETI LiIon RB 3100 7.2v
1 x PPS-4D Propeller
1 x 20x1000 mm Ring Strap Back To Back
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Tape GFK 50 mm
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Tape GFK 38 mm
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
2 x Marker ties (20 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x Stickers-digit for marking
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 250 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Battery RX JETI LiIon RB 5200 7.2v
1 x Cinta Goldfix 1m
1 x 
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x ALU servo arm 90º 3 mm shaft
1 x ALU double servo arm 3 mm shaft
1 x Servo AN-20 MGBBA
1 x ALU servo arm 3 mm shaft
1 x "L" servo arm 65x49 mm (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
1 x Crystal Universal RX 35.130 Ch 73
1 x XH female balance (6S) connector (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x XH male balance (5S) connector (2 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Short ball link M1.6 (6 uds)
1 x Micro Crystal RX 35.120 Ch 72
1 x Extinguisher CO2 - 2 Kg
1 x XH male balance (9S) connector (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Conector Servo female 4 pines
1 x XH male balance (6S) connector (2 pcs)
1 x Joint with bearing M3 22x5,5
1 x MR30 connector male
1 x EasyFLY Addon
1 x Connectors MPX male
1 x Hovercraft sailcloth
1 x XH male balance (7S) connector (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Round Rod 1,5x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Round Rod 3,0x1000 mm
25,566.78EUR
Manufacturers
Languages
Español English
Currencies