2 x | Digital precision scale up to 2000 g |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Dust collector for mould cleaning |
1 x | Electromotor starter EME 35cc |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | TrainerCord (master-learner) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | AC-10 pre-rotacion with motor |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Ball link Aluminio M3 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Cable coupler M2 (10 uds) |
2 x | Field folding model stand |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Medidor ángulos y/o incidencias |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | 15 mm reinforced hinge |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Copier 5x20 cm pcs |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 25 mm Sandpaper file |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Conector JR Servo male (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Cinta Goldfix 1m |
1 x | SAITO FG-36 carburetor |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Support pump Xicoy X45 |
1 x | Xplorer2 anemometro |
2 x | Xplorer1 anemometro |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Glases Nimbus "Black" |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Hot Glue Stick BLACK |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Aluminium servo arm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | CC 02 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Cable Cargador FUTABA |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | 1/6 Pilot "Tony" |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | White smoke canister 65 g |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | "M" set |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | 1/12 Pilot "Cougar" |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Oracover CARBON Metalic 1 m |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Extension 90 cm (Futaba) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Extension Arm for Carburetor |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | Oracover Brown 2 m |
1 x | Extension silicon 75 cm (Futaba) |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Ferrita 14x8x5.5 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Reed valve for DA 50-R |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Ring 320 mm length (5 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Adapter lead MPX/XT60 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Glases Ace |
1 x | Recess mount-rem. glow plug set |
1 x | Battery charging cable XT60 |
1 x | Starter EM Gear Power 80 |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Support ECU Xicoy X-45 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | 5 LiPo XH>EH adapter |
1 x | Support Pitot JETI |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Dean "T" - Futaba Adapter |
1 x | Z Bender - S Type Tool |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | GLOW 9C + accesories |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 01 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | DLE Ignition unit |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Hot Glue Stick GREEN |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Compact on-board starting system (9715) |
1 x | Tube Pitot to PIXHAWK |
1 x | Glases Moritz |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | DLE 30 complete electronic ignition |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Bungee HLG Premium |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Interface Realflight Simulator |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | GameCommander USB Universal |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Cable coupler M2x66 (2 uds) |
1 x | EasyFLY Addon |
1 x | Extension MPX-MPX 20 cm |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Interface Jack Adapter IKARUS |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | 30 cm DEANS female connector |
1 x | BALSA triangular 10x10x1000 mm |
1 x | AX-60 starters (5 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | 3,0x60 mm allen screwdriver |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Bag connector 2 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Conector Servo female 4 pines |
1 x | 1/12 Pilot "Tom" |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Strip 2,5x1,25x330 mm |
1 x | 30 cm MULTIPLEX female connector |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Ball Link Plier |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | 1/10 Pilot "Jack" |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Conector MT-60 (pair) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Pilot "Anthony" (Slimline) |
1 x | 1/7 Pilot "Japanese" |
1 x | Large flex hinge (12 uds) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Digital weight, angle and balance meter BASIC |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Ball Link Plier |
1 x | 1/6 Pilot "Cindy" |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Dremel 3000 130W |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Ventral support for AX-18/AX-60 |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Blue smoke canister 140 g |
1 x | EC-Cutter |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | |
1 x | Copier 2x20 cm pcs |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | 1/6 Pilot "Garry" |
1 x | Blue smoke canister 100 g |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Dean-T Plug Mold |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Piloto jet 130 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Optical RPM Sensor |
1 x | 25 mm reinforced hinge |
1 x | Propeller balancer |
1 x | A/C quality beech plywood 600x300x6.0 mm |
|
10,437.88EUR |