1 x | Shirt Hispano Aviación |
1 x | Motor DLE 170 M- Paramotors |
1 x | Cap Hispano Aviación |
1 x | Interface Realflight Simulator |
2 x | Oracover Black 10 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Oracover CARBON Metalic 1 m |
3 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Vacuum bag, 1200 mm x 50 m |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Piloto JET 1:3,5 |
3 x | Switch Button DS Tx DUPLEX |
2 x | AddCAP 10AS capacitors |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
3 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
2 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
2 x | Transmitter Stick Ends JETI DS-16/14 |
2 x | Battery RX JETI LiIon RB 3100 7.2v |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Neck strap JETI DS |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | 1/4 Pilot "Mike" |
1 x | Ball Link Plier |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
1 x | Switch Cap L (silver) |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Emisora JETI Duplex DS-16 II Carbon Line RED |
1 x | Crimping tool |
1 x | Mono-Switch Memory FUTABA |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | 1,5x50 mm allen screwdriver |
3 x | ABS angle 4,0x4,0x1000 mm |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Angle of incidence meter |
2 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Adap/Exten for Futaba 12-14C |
2 x | Transmitter JETI Duplex DC-24 EX Carbon Line Light BLUE Multimo |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
1 x | Emisora JETI Duplex DS-16 II SILVER Multimode |
1 x | Ball link M2,5 (10 pcs) |
1 x | Maleta transporte FUTABA 10PX |
1 x | M3 Maxi ball link (2 uds) |
1 x | Cabling for Fox MDM1 wings |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Conector BEC female (10 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Horn with ball 40x30 |
1 x | Control horn long w/ball |
1 x | Horn mando small (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Conector XT-30 (macho) |
1 x | 20 mm carbon horn |
1 x | Cable control set |
2 x | Piñon motor rotor LA-500 |
1 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | LA500 cyclic central part |
1 x | Motor rotor LA-500 |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | PHASOR RACE 2035/4100 1D |
2 x | Switch Spring-Loaded 2-Position DC Tx DUPLEX 2,4EX |
2 x | Switch for DS: Long 2 Position |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
2 x | switch short 3-position DS Tx DUPLEX 2,4EX |
2 x | Switch for DS: Long 3 Position |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | SBEC Jeti |
1 x | Jeti Spin 220 Pro OPTO |
3 x | Pitot tube JETI MSpeed DUPLEX |
2 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | Profile ABS half cane 2.0x1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | Rubber profile 10-2 mm 2M |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Hand Pads for Tray JETI |
2 x | SWTU2 switch |
2 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
2 x | Jeti Black cap |
2 x | Master MEZON 120 |
5 x | Switch for DS: Short 2 Position |
2 x | Teacher / Student Cable |
2 x | Jeti Spin 200 OPTO |
2 x | Jeti Spin 300 OPTO |
2 x | switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX |
2 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
3 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | DUPLEX R7 REX receiver 2,4GHz |
3 x | RC Power Switch 5A |
1 x | Film release agent PVA 25 ml |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
2 x | JETImodel SINGLE BEC |
1 x | DUPLEX R12 receiver REX Assist |
1 x | Jeti Advance Pro Program Card |
2 x | MT 125 temperature sensor |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Jeti SPIN 55 Pro |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Chopped glass fibre strands 3 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | DUPLEX USB Adapter |
1 x | Screws of the Back Cover for DS14/16/24-Tx (8pcs.) |
2 x | Styrene plate 320x120x1.0 mm |
2 x | PHASOR RACE 2035/2100 2D |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | JETI SPIN 80 Pro |
1 x | Jeti Spin 77 OPTO |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Jeti Spin 22 |
3 x | JETImodel DPS 40 |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Receptor DUPLEX REX R9 Slim Assit |
2 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
2 x | MAX BEC |
1 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
1 x | MRPM-AC revolution sensor |
3 x | Switch for DC: Long 3 Position |
1 x | DUPLEX R6 receiver REX Assist |
1 x | Jeti SPIN 66 Pro |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Tray JETI for DS-14/16/24 Black |
2 x | Jeti Spin 125 OPTO |
1 x | Jeti Advance Plus Program Card |
2 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Jeti Spin 99 OPTO |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Electronic switch JETI SP06 Opto |
1 x | JETI Counter for DC-24 Carbon Design 3 |
2 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | ESC MEZON 120 Lite |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | switch long 3-position DC Tx DUPLEX 2,4EX |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | JetiBOX |
2 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
3 x | switch 1-Spring-UP 3-position DS Tx DUPLEX 2,4EX |
1 x | Glass fabric 25 g (2 m²) |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | PVC grid diagonal 290x185x0.32 mm |
2 x | SBEC 40 |
1 x | Jeti SPIN 33 Pro |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Jeti Box mini |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | U Profile ABS 3,0x6,0x1000 mm |
3 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
3 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | USB Mini Camera endoscope |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | T-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | Profile ABS half cane 3x1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | LED wire (blue - 2pcs) |
1 x | LED blink wire flashing (orange - 2pcs) |
1 x | TX Tray V1 Hand Rests only |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Transmitter Stick Ends V5 Red - M4 JR/DX7 |
2 x | Servo BMS-4112 |
1 x | Transmitter Stick Ends V4 Blue- M3 (2 pcs) |
1 x | Transmitter Stick Ends V3 Red - M3 (2 pcs) |
1 x | Antenna holder bracket double |
1 x | Two-function control switch + button by FUTABA |
1 x | LED lighting system High Power |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Smoke Oil Blue 5 l |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
2 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | 12V Car Adapter |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Wheel 38 mm V2 |
1 x | OLED-Display for PowerBox Mercury SRS |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | XT-30 connector (pair) |
1 x | RH long aluminium horn (2pcs) |
1 x | Long horn 50x26 |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Extension for SensorSwitch 60cm |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Small control horn with bearing (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Micro control horn (2 pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | LA500 housing-lower cyclic |
1 x | Avanti XS Jet , Carrying bags (SebArt) |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Xplorer4 anemometro |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Softshell Hispano Aviación |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Avanti S 1.8m Jet White/Blue |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | Hopper UAT Sebar 600 ml |
1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Avanti XS Jet , Tricolore Canopy |
1 x | DUPLEX 2.4 EX MBar |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Aero-Master (Aero-naut) |
1 x | 5 mm Prop Adapter M6 |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | Oratex Natural White 2m |
2 x | Tension Springs (4pcs.) for DC/DS Tx DUPLEX 2,4EX |
1 x | BEC 3A FOXY |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Pilot "Anthony" (Slimline) |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Gear set HITEC HS-225 |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | 16mm Gear-Spotlight, 4W |
1 x | DSM 10 Dual Switch Mixer |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | SCHARNHORST accessories |
1 x | La Capitania di Venetia accesories |
1 x | 4 mm Prop Adapter M6 |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Oracover ROYAL RED 2m |
1 x | Oracover CHROME 2m |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
2 x | Jeti SPIN 44 Pro |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Transmitter JETI Duplex DS-12 EX Multimod BLUE |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 20 mm servo arm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Adapter rotula M3 |
1 x | Futaba 2x20 mm servo double arm |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Receptor MINIMA 6S HITEC |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DC24 II Transmitter case insert |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Dumper propeller 6/8 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter M8 |
1 x | 3 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter M8 |
1 x | 2 mm Prop Adapter M6 |
1 x | Motor OS 3820-1200 electric |
1 x | SCHARNHORST Battleship 1:200 |
1 x | |
1 x | |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | CA Glue fast 20g |
2 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Oratex White 2m |
1 x | Oracover light Grey 2m |
1 x | Oratex Antik 2m |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oratex Natural White 20m |
1 x | Oratex Yellow Cub 10 m |
1 x | Oratex Red Fokker 10 m |
1 x | Oracover Yellow CUB 10 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | switch long 3-position DS Tx DUPLEX 2,4EX |
1 x | Transmitter JETI Duplex DC-16 II YELLOW Carbon Line Mod.2 |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | FOXY G2 C3530-700 |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/6 Pilot "Tony" |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller) |
1 x | JETI handheld transmitter DS-14 II Red Multimode |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Neck strap JETI DC |
2 x | OPTIC 8 opto Rx-servo insulation |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Rudder 107-06 |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Mounting Stickswitch |
1 x | JETI handheld transmitter DS-14 II Green Multimode |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Horizontal mounting servo holder |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Hitec 30 mm servo rounded arm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Extractor piñones 2.3/3.2 mm |
|
64,696.75EUR |