Top » Catalog » Hardware » Transmitters/Receivers » Receivers » Acc/ Telemetria Jeti » HK80001302

34.90EUR

DUPLEX MUI 30 Sensor
[HK80001302]

Assignment of the MUI sensor is measurement of voltage, current and consumed capacity of flight batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by the JETIBOX terminal. For communication purposes the Duplex system takes advantage of the 2,4 GHz band, which besides sending remote control data to the model also receives data from the model back to the transmitter. During flight obtained telemetric data are transmitted in real time and the actual values of the measured data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current measurements in your model and transmit these informations with the aid of the DUPLEX system (receivers and transmitter modules). Thanks to exact current measurements these sensors render it possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current flow time and its average as well as maximum value. Furthermore it offers exact voltage measurements and recordings of voltage minimum and maximum values. The task of parameter adjustment and measured data setup is performed by the well known alround talent – the JETIBOX terminal. MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such alarms may be set for measuremets of maximum current and minimum voltage as well as for a maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the transmitter module. For better differentiation are the particular alarms distinguished by Morse alphabetic letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is not connected. With the JETIBOX in place the LCD display shows which parameter has been violated. In case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD display.

DUPLEX 2.4 EX MUI 30 voltage-sensor
- Measurement of voltage, current and battery capacity
- Transmission with Jeti Duplex system
- Current sensor 30 A
- Operating voltage 5-8.4 V
- Current consumption ca. 24 mA
- Dimensions approx 20x16.5x5 mm
- Weight about 10 grams
- Voltage measurement range 0-60 V
- Current measuring range 0-30 A
- Accuracy voltage / current 1% / 0.1%
- Operating temperature -10 °C up to 85 °C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Motor DLE 200cc Std
2 x	Motor DLE 170 M- Paramotors
3 x	Motor DLE 430 cc - Paramotors
2 x	Silent-blocks DLE 170M
1 x	Big Crow DLE-170M
2 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Slave-cable USB Easy Sim
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
3 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Smoke set "Glider"
1 x	Glases Moritz
1 x	Extension silicon 10 cm (Futaba)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	ABS tube 2.0x1.0x1000 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Adapter lead MPX/XT60
1 x	DUPLEX MUI 50 Sensor
1 x	DUPLEX 2.4EX MULi 6s M
1 x	DUPLEX 2.4EX Expander E4
1 x	Conector JR Servo female (50 pcs)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Suncover 100cc Red
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	EDGE 540-A 91" (2310 mm)
1 x	SE Ring 360 mm (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Surface Indicator Gauge Small
1 x	BALSA trip 10x10x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	SE Ring 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	"S" set for planes
1 x	Smoke set "M"
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Extension silicon 30 cm male (Futaba)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Tape GFK 38 mm
1 x	4 LiPo XH>EH adapter
2 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Gates hinge
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	12V Car Adapter
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	OSD Telemetry sensor
1 x	Battery voltage telemetry
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	DUPLEX 2.4EX MUI 75
1 x	PPM Encoder Module
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	White 2,4 GHz antenna exit guides (2 pcs)
1 x	LASER 73" 1.85m (05) PILOT
1 x	"M" set
1 x	Green smoke canister 65 g
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	SE Ring 480 mm (2 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Parachute expulsion foam
1 x	Short ball link M3 (6 uds)
1 x	Xplorer2 anemometro
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	18 mm reinforced hinge
1 x	"S" set for boats
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	PCARD Wireless System
1 x	Joint with bearing M3 22x5,5
1 x	CC 03
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	White smoke bombs AX-9 (10 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	EDGE 540-A 105" (2660 mm)
1 x	Extension silicon 100 cm (Graupner)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Glases Innovation Plus
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Glases Stratus
1 x	Yellow smoke canister 100 g
1 x	Socket head ball link M3 (2 uds)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Canopy Latch
1 x	Premium servo extension 100cm
1 x	Foil for sticking flaps and ailerons
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Socket head long ball link M3 (6 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	AX-60 starters (5 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Motor DLE 200cc Premium Muffler
1 x	Cabel "Y" 15 cm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Smoke set "S"
1 x	Ball link M1.6 (6 uds)
1 x	SLICK 360-A 104" (2640 mm)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Futaba Female 40 cm extension
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Ball Link Plier
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	White smoke canister 65 g
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	M3 Maxi ball link (2 uds)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	AC-10 pre-rotacion with motor
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Angle of incidence meter
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Spikes Band (5 m)
1 x	Long pinned hinge (6 uds)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	TWIST planeador gomas
1 x	ABS tube 8.0x7.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	ABS tube 10.0x8.0x1000 mm
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	MPX-Dean "T" Adapter
1 x	Aluminium servo arm (2 uds)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Green smoke canister 100 g
1 x	Indoor hinge with servo arm integraded
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Blue smoke canister 100 g
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	800TVL CMOS camera for FPV
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	AddCAP 10AS capacitors
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Carbon plate 350x150x1.0 mm
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	JETImodel Addcap 820
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	2 piece mounting frame
1 x	DUPLEX 2.4 EX MBar
1 x	Adapter lead MPX/EC3
1 x	Charging Extension 50cm for 2 Battery
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	PARAGON Trainer 46-55 1580 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Conector JR Servo male (10 pcs)

52,749.01EUR