135.00EUR

Servo HITEC D950 TW
[ROID950TW]


Servo HITEC D-950 TW.


The titanium gear D-950TW is part of Hitec’s D-Series dynamo servo line. All Hitec D-Series servos have been designed using their cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU, and a 12-bit ADC for unprecedented programmability and flexibility. These servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with an M3 pan head with a phillips drive style, each D-Series servo brings monster performance never known before in the market.

Special Features:
- Wide Voltage Range: DC 4.8-8.4V
- 2 cell Li-Pi (6 cell Ni-MH) compatible
- Programmable digital amplifier with MOSFET drive
- Gold plated connector
- Narrow dead band width & high standing torque
- Applied H25T horn gear
- 3mm horn screw (‘+’ & HEX socket screw included)
- 32bit MCU / 12bit ADC
- Durable titanium alloy metal gears with dual ball bearings
- Ultra hardness gear shaft with 3 axial metal bushing
- Heat sink for motor
- Water & dust resistant (splash proof)

Dimensions 1.57” x 0.79” x 1.50” (40 x 20 x 38mm)
Product Weight 2.40oz (68g)
Output Shaft Style 25 tooth (H25T) spline
Voltage Range 4.8V - 8.4V
No-Load Speed (4.8V) 0.23 sec/60°
No-Load Speed (6.0V) 0.17 sec/60°
No-Load Speed (7.4V) 0.14 sec/60°
Stall Torque (4.8V) 291.63 oz/in. (21.0 kg.cm)
Stall Torque (6.0V) 402.73 oz/in. (29.0 kg.cm)
Stall Torque (7.4V) 486.05 oz/in. (35.0 kg.cm)
Max PWM Signal Range (Standard) 750-2250μsec
Travel per µs (out of box) .079°/μsec
Max Travel (out of box) 118.5°
Pulse Amplitude 3-5V
Operating Temperature -20°C to +60°C
Continuous Rotation Modifiable Yes
Direction w/ Increasing PWM Signal Clockwise
Deadband Width 2µs
Motor Type Coreless
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearings
Gear Type Straight Cut Spur
Gear Material Titanium
Wire Length 11.81" (300mm)


Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x T-Motor U7-V2.0 Kv420
1 x SE Ring 240 mm (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Straightened rod Ø 0.8 mm x 1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Oracover Yellow CADMIO 2 m
3 x ABS tube 8.0x6.0x1000 mm
1 x F450/550 Quadcopter, landing gear
1 x BALSA leading edge 8x10x1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Monokote BLANCO jet (1.8x0.65m)
2 x Oratex Natural White 2m
2 x ABS tube 3.0x2.0x330 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Spring clamp for tube Ø50 mm
1 x White smoke canister 100 g
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x O-ring Saito FG-73 5cyl
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Spray Graphit 33
1 x Solvent Plasti Dip 1000 ml
1 x Giant Scale Muffler D.A. 70
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 1000 ml sealer (DOPE)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x White smoke canister 65 g
1 x Glases Aspen
1 x MPX-Dean "T" Adapter
1 x Adapter lead MPX/EC3
1 x CC 03
1 x Adapter lead MPX/XT60
1 x Glases Stratus
1 x 30 cm BEC cable (female)
1 x CC 01
1 x Cabel charger transmitter GRAUPNER
1 x JETImodel SINGLE BEC
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
2 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x ABS tube 20.0x18.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
2 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x ABS tube 8.0x7.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Servo HITEC D85 MG
1 x Servo Digital HITEC HS-5065 MG
1 x Servo HITEC D954 TW
1 x Servo HITEC HS-45 HB, servo box
1 x Servo HS-5565MH High Voltage
1 x Servo HITEC HS-5475 HB Digi
1 x Servo HITEC HS-5245 MG Digi
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Servo SAVOX SV-1273 TG
1 x Oratex Red Fokker 10 m
1 x Ply-Span 450x600/13g Orange
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Oratex Yellow Cub 10 m
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
2 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
2 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x ABS tube 5.0x3.0x1000 mm
2 x ABS tube 7.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x ABS tube 12.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo Robbe FS 525 BB MG HV
1 x Servo HITEC HS-325 BB
1 x Servo HITEC HS-225 MG
1 x Servo case HS-225MG/225BB/5245MG
1 x Servo HITEC HS-55
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HS-5070 MH Hi Volt
1 x Servo HITEC HS-5585MH
1 x Servo HITEC D131 MW nano
3,637.03EUR
Manufacturers
Manufacturer Info
Hitec
Hitec Homepage
Other products
Languages
Español English
Currencies