Top » Catalog » Hardware » Servos » FUTABA » FUTBLS172SV

199.00EUR

Servo FUTABA BLS172 SV
[FUTBLS172SV]

This is the Futaba High Voltage BLS172SV S.Bus2 UHT
Programmable Metal Gear Servo.

FEATURES
Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors.
Ultra high torque
Handles up to 2S LiPo power
Programmable and compatible with S.Bus and S.Bus2
Dual ball bearing supported output shaft
The center and bottom case are aluminum to help dissipate heat.
INCLUDES
HV BLS172SV UHT S.Bus2 Servo with Instructions
0.83" (21mm) Round Horn
1.8" (45mm) Round Horn
1.5" (39mm) Four Point Horn
1.2" (32mm) Six Point Horn
Four each, Grommets, Eyelets and Mounting Screws

SPECIFICATIONS
Torque: 514 oz-in (37 kg-cm) @ 7.4V
Speed: 0.11 sec/60° @ 7.4V
Dimensions: 1-9/16 x 13/16 x 1-1/2" (41 x 21 x 38mm)
Weight: 2.6 oz (74 g)
SBus Programmable Defaults
Dead Band Degree: 0.36
Damper Factor: 128
Stretcher Gain: 1
Boost: 5
Neutral Offset Degree: 0
Travel Adjust Percentage: 100%
Reverse (Normal/Reverse): Nor
Stop Mode (Free/Hold): Hold
Buzzer (On/Off): Off
Smoother (On/Off): On
Boost (On/Off): Off
Soft Start: 3.0

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DC24 II Transmitter case insert
35.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	1,5x50 mm allen screwdriver
1 x	Cable coupler M2,5 (2 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
3 x	SE Ring 300 mm (2 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Remote electric ignition system
1 x	1/12 Pilot "Fighter"
2 x	SE Ring 360 mm (2 pcs)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Support pumb/filter Xicoy X45
1 x	Spray Graphit 33
1 x	Release wax 250ml
2 x	Spikes Band (5 m)
2 x	Socket head long ball link M3 (6 uds)
1 x	Ball link M1.6 (6 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Smoke set "Glider"
1 x	Support Flush MPX Conector (6 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Ball link M3 RPA's-UAV's
1 x	Pilot "Goose" (Slimline)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	2 mm female connector (2 pcs) with safety connector
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Strip 1,5x1,5x330 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Conector Servo female 4 pines
1 x	Vacuum bag, 1200 mm x 50 m
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Axle for motor A20-S (3 uds)
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Backmountset complete A40
1 x	Beech dowels 4.0 x 1000 mm
1 x	Motor A50-14 L 8-Polos Electric turbine
1 x	Motor B20-10 L + 4:1 gearbox
1 x	Motor A20-20 L EVO
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Size "M" motor holder for class 400
1 x	Size "L" motor holder for class 600
1 x	Mini neumatic retract landing gear
1 x	Hose connector stopper 4 mm
1 x	40 mm air cylinder
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
1 x	Medium pin type hinge (12 uds)
1 x	LUCAS pilot ARTF
1 x	Paramotor BackPack XXS 2
1 x	Neumatic retractable landing gear (Aero-Naut)
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Servo HITEC HS-5087 MH
1 x	Servo HITEC D954 TW
1 x	Servo HITEC HS-5475 HB Digi
1 x	Servo HITEC HS-5084 MG
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Snap long M2 (10 uds)
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Split pin 1x8 mm (10 uds)
1 x	20x200 mm battery rings
2 x
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Servo KST X08 Plus 9g HV servo
1 x	11 mm wing servo holder
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M2,5 (10 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Servo HITEC HS-45 HB
1 x	Servo HITEC D85 MG
1 x	Servo HITEC HS-5485 HB Digi
1 x	Servo HS-5565MH High Voltage
1 x	Servo HITEC HS-55
1 x	Clip mini fixing for wing (2 pcs)
1 x	Servo KST X10-710 V8.0 7.5Kg HV
2 x	Cinta Goldfix 1m
1 x	250 mm / 16 mm Airbrakes
1 x	Servo FUTABA S 3071 HV S-Bus
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	Cockpit latch closing I=10 mm
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	SE Ring 450 mm (2 pcs)
1 x	Futaba 3010 - Gear Set
1 x	Servo FUTABA BLS172 SV
1 x	Foil for sticking flaps and ailerons
1 x	Futaba S9650/9670SV - Upper Case
2 x	Ring 320 mm length (5 pcs)
2 x	Tape GFK 25 mm
1 x	45 mm rods set for direction control
2 x	SE Ring 240 mm (2 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	140 mm rods + T patellas set for direction control
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	Cockpit metalic closing
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	80 mm rods set for direction control
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Cockpit aluminium closing
1 x	Servo FUTABA BLS 272SV
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Split M1,2x10 (10 pcs)
1 x	Servo GO-09 9g
1 x	Tape GFK 38 mm
1 x	Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x	Cockpit aluminium closing 4.7g
1 x	Programador FUTABA USB CIU-3
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Suncover 100cc Red
1 x	SE Ring 350 mm (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	10-15mm Servo Arm HITEC
1 x	Snap pin for micro clevis (10 uds)
1 x	Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x	Lead with adhesive (2 pcs)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	SERVO S9177SV HV S-Bus2 Programable
1 x	Silent-blocks DLE 170M
1 x	Futaba BLS255/272/471SV - Gear Set
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Power MULTIlight
2 x	SE Ring 400 mm (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Servo FUTABA BLS173 SV
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Snap short M2 (10 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	10-15mm Servo Arm
1 x	20x1000 mm Ring Strap Back To Back
1 x	90 mm rods + T patellas set for direction control
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Servo FUTABA BLS 276SV
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo FUTABA SBL 471 SV
1 x	Soporte servo KST X10 mini / DS135MG
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	Regulador Jeti Jes 045
1 x	Tape GFK 50 mm
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	USB programador GO servos
1 x	Window mounting channel 5m
1 x	Servo FUTABA S 9670 SV
1 x	20-25mm Servo Arm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)

8,525.49EUR