Top » Catalog » Hardware » Servos » Savox » SAVSV1261MG

88.00EUR

Servo SAVOX SV-1261 MG
[SAVSV1261MG]

The SV1261MG takes the performance of the SV1260MG and utilizing the same size case, increased the torque to a whopping 277oz/in while maintaining an impressive 0.095 second transit time. Primarily intended for air applications, this powerhouse can also be used in specialty cars, trucks, and boats and is intended to be used on direct 7.4V LiPo current.

Features:
Metal gear train provide durability against heavy use
Capable of HV operation
All aluminum case provides strength and cooler operating temperatures

Specifications:

Torque @ 7.4v: 20.0kg/277oz./in
Torque @ 6.0v: 15.0kg/208oz./in
Speed @ 7.4v: 0.095 sec/60 deg
Speed @ 6.0v: 0.12 sec/60 deg
Dimensions L x W x H (mm): 35 x 15 x 30.7
Weight: 40.0g / 1.4 oz
Operating Temperature: 14° - 122°F (-10° - 50°C)
Running Current (no load): 120mA @6.0V, 180mA @7.4V
Stall Current (at locked): 4000mA @6.0 V, 4700mA @7.4V
Idle Current: 5mA @6.0V, 5mA @7.4V
Wire Length: 250 ± 5mm
Output Gear Spline: 25 Tooth
Bearings: 2BB
Operating Travel: 100° (1000 → 2000 µ second)
Neutral Position: 1500 µ second
Pulse Width Range: 800 → 2200 µ second
Maximum Travel: Appx 165° (800 → 2200 µ second)
Refresh Rate: 333 Hz
Motor Type: Coreless

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	10 mm Quick clamp_L (6 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
2 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Cable set PREMIUM, fuselage/wing
1 x	ORACOVER Ferrari red (2 m)
2 x	Ply-Span 450x600/13g Orange
1 x	Oracover Azul Cielo 2 m
1 x	PROFICOVER 5m
1 x	Oracover White 10 m
1 x	Oratex Antik 2m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Yellow CUB 2 m
1 x	Oracover CHROME 2m
2 x	Motor DLE 200cc Premium Muffler
1 x	Oracover Orange 2 m
1 x	Ply-Span 450x600/13g Red
1 x	ORACOVER Fluor red (2 m)
1 x	Ply-Span 450x600/13g Blue
1 x	Oracover Red 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Ply-Span 450x600/13g White
1 x	Oratex White 2m
1 x	Oratex Yellow Cub 10 m
1 x	Motor DLE 170 M- Paramotors
1 x	Oracover Green10 m
1 x	Oracover Brown 2 m
2 x	Small Crow DLE-170M
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Black 2 m
1 x	Big Crow DLE-170M
1 x	Oratex Red Fokker 10 m
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover ROYAL RED 2m
1 x	Oratex Natural White 20m
1 x	Oratex Silver 2m
1 x	Motor DLE 430 cc - Paramotors
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Ventus 1:4 set of instruments
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
2 x	Screw-lock connector M2 (2 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Covered closure or fairings
1 x	One touch canopy lock
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	Canopy Latch
1 x	Stainless steel cable Ø 1.3 mm (10 m)
2 x	Cockpit plastic closing
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Steering arm 12 mm Ø 4 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
3 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	PCARD Wireless System
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 65 g
2 x	"S" set for planes
1 x	Red smoke canister 65 g
1 x	AX-60 starters (5 pcs)
1 x	Parachutist
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	Blue smoke canister 140 g
1 x	"M" set
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Smoke set "M"
1 x	White smoke canister 140 g
1 x	Yellow smoke canister 100 g
1 x	Red smoke canister 100 g
1 x	Smoke set "Glider"
1 x	White smoke canister 100 g
1 x	Ventral support for AX-18/AX-60
1 x	White smoke bombs AX-18 (5 pcs)
2 x	Parachute expulsion foam
1 x	Remote electric ignition system
1 x	Smoke set "S"
1 x	White smoke bombs AX-9 (10 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	18 mm reinforced hinge
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Copier 5x20 cm pcs
1 x	EasyFLY Addon
1 x	6 mm ball link M3 (10 pcs)
1 x	1000 ml sealer (DOPE)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	120x60 mm SLH KOVO wheel
1 x	Ply-Span 450x600/13g Black
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	PVC transparent battery termo-retract 85 mm (1 m)
1 x	Balsa panel 5.0x100x1000 mm
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	3 LiPo XH>EH adapter
1 x	Balsa panel 1.0x100x1000 mm
1 x	20 g tin paste
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Balsa panel 8.0x100x1000 mm
1 x	2 mm male connector (2 pcs) with safety connector
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Decorative caps, multicoloured
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Bidule 55 2460 mm Cabina
1 x	Transmitter Balancer SPK DX-8
1 x	Bidule 111 3000 mm Canopy
1 x	Futaba Radio Case
1 x	Switch Cap L (silver)
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Yellow CADMIO 2 m
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Cable grommet Ø 3.2 mm (4 uds)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x	Marker ties (20 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Motor mount M
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Spinner 40 mm Black (Kavan)
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Control for forward wheel (MINI)
2 x	Steering arm 16 mm Ø 3 mm
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Wheel collar 5 mm Ø (4 uds)
2 x	Allen wheel collar M3x3
1 x	Aluminium wide washer M3 blue (4 pcs)
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
1 x	38x4,5 mm wires output (2 pcs)
1 x	Pushrod octagone 3/2
1 x	28x5 mm wires output (2 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	X-RAY Micro QR (Tail Tube)
1 x	100 mm rods + T patellas set for direction control
1 x	Servo AN-8 HBA
1 x	Z-shaped servo mount
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Savox Brushless Servo SB-2271SG

19,485.06EUR