Top » Catalog » Hardware » Servos » BLUE BIRD servo » BMS4112

74.90EUR

Servo BMS-4112
[BMS4112]

DESCRIPTION
Torque At 6.0V 33.9 kg-cm
Torque At 7.4V 41.8 kg-cm
Torque At 8.4V 47.5 kg-cm
Speed At 6.0V 0.15 sec / 60°
Speed At 7.4V 0.12 sec / 60°
Speed At 8.4V 0.11 sec / 60°
Soft Start Protection : Soft start to a neutral position.
Over Voltage Protection : Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection : Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection : Stall in 5 sec, output torque goes down.
Temperature Protection : Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. Lose Control Protection : When losing the transmitter signal, that servo will be back to the neutral position immediately and lock.
Power Supply
Operating Voltage Range : 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)
Control System : Digital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency：Up to 333Hz / Neutral：1500us or 1520us
Dead Band Width : 0.001ms ( Default：1us)
Ball Bearing : Dual
Gear : All Steel Alloy Metal Gears
Motor : High Premium Coreless Motor
Horn / Gear Spline : 25 Teeth ( Same as F-Type )
Dimension (mm) : 40.5 x 20 x 39 mm / 1.59 x 0.79 x 1.54 in
Weight (gram) : 66.0 ± 1 grams / 2.33 oz

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	Round Rod 3,0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	Round Rod 2,5x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Beech dowels 4.0 x 1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Round Rod 1,5x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Strip 2,5x1,25x330 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Round Rod 1,0x1000 mm
1 x	Canopy Latch
1 x	Beech dowels 10 mm x 1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Pine wood slat 10x10x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	BALSA triangular 8x8x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
2 x	SUS wire 3m (nylon coated)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	BALSA trip 10x10x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Round Rod 6,0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Locking cable tie 2.5x100 (uds)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Strip 3,5x1,75x330 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS angle 4,0x4,0x1000 mm
2 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Foil for sticking flaps and ailerons
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Xplorer3 anemometro
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
1 x	USB HLS prog. interface
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	CM-3
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	TrainerCord (master-learner)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (male)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Adapter lead MPX/EC3
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Dean "T" - Futaba Adapter
1 x	Cabel charger transmitter GRAUPNER
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Circlick securite
1 x	JETImodel SINGLE BEC
1 x	Ply-Span 450x600/13g White
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Dust collector for mould cleaning
1 x	Ball Link Plier
2 x	28x5 mm wires output (2 pcs)
2 x	Birch plywood plate 600x300x2.0 mm
1 x	100 mm rods + T patellas set for direction control
1 x	Chopped glass fibre strands 3 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Split M1,2x10 (10 pcs)
1 x	80 mm rods set for direction control
1 x	45 mm rods + T patellas set for direction control
1 x	Snap short M2 (10 uds)
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Balsa panel 5.0x100x1000 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	11 mm Rubber pads (14 pcs)
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	Styrene plate 320x120x0.5 mm
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Rubber profile 10-2 mm 2M
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Rubber profile 6-2 mm 2M
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	120x60 mm SLH KOVO wheel
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	ABS I Strip 10x5x1000 mm
1 x	Covered closure or fairings
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Micro Switch button
1 x	Extension MPX-MPX 20 cm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Propeller POWER-PROP 7x7
1 x	Tubo espiral FESTO 6x1 Black
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Servo GO-1053 MG 20.0kg
1 x	Savox Brushless Servo SC-1267 SG
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	Horizontal mounting servo holder
1 x	Futaba 25 mm servo arm with M3 ball link

6,269.99EUR