2 x | Softshell Hispano Aviación |
2 x | Vest clothes Hispano Aviación |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
2 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | ROBB1-F1959 |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | EDF Jet-Flex 80 - 8 kg |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Emisora FUTABA T18 SZ + R7208SB |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
3 x | Carbon fiber rod 10 mm x 1000 mm |
3 x | Threaded coupler M3 (10 uds) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Cap Hispano Aviación |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | JETFAN JF80 + motor HET 700-68-2100 Kv |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | JETI Counter for DC-16 (Blue) |
1 x | Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue) |
2 x | Switch Button DS Tx DUPLEX |
1 x | Maleta transporte FUTABA 10PX |
2 x | Soporte filtro FESTO (4 pcs) |
2 x | Hand Pads for Tray JETI |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Premium servo extension 25cm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | EDF 60/15 Mk.2 MEga |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | 3,0x60 mm allen screwdriver |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Crimping tool |
2 x | Round Rod 1,25x1000 mm |
1 x | |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | JETI transmitter DC-14 II Green Multimode |
1 x | Emisora JETI Duplex DS-12 EX Special Edition "Carbon Purple" |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Emisora JETI Duplex DS-16 II Carbon Line YELLOW |
1 x | JETI handheld transmitter DS-14 II Blue Multimode |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Starter 12v (Max 180 and 30ccm) |
2 x | Strip 2,0x2,0x330 mm |
1 x | Screwdriver for Torx® TX8 |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Digital precision scale up to 2000 g |
1 x | Copier 2x20 cm pcs |
3 x | Round Rod 4,0x1000 mm |
1 x | JETI transmitter DC-14 II Red Multimode |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | Dust collector for mould cleaning |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Transmitter JETI Duplex DS-12 EX Special Edition |
1 x | Rocket D3-P |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
2 x | Charger ISDT 608AC 200W |
2 x | LASER 260 60" V2 ARF Red (SkyWing) |
2 x | EXTRA NG 85" 2159mm red/white |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Pulley brass 12/2 (2 pcs) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | Extension silicon 30 cm female (Futaba) |
2 x | Extension silicon 10 cm (Futaba) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Support FUEL DOT V3 |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Support Pitot JETI |
1 x | Extension silicon 50 cm (Futaba) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Hot Glue Stick GREEN |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
2 x | Tray JETI for DS-14/16/24 Black |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Vasa model Catapult |
1 x | Bungee HLG Premium |
2 x | EDF Jet-Flex 80 - 8 Kg |
1 x | Set EDF Mini Avanti Full Aluminium |
1 x | EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Kwik link with arm M5xM2,5xL30 |
2 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Pulley brass 10/2 (2 pcs) |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
2 x | Carbon fiber rod 12 mm x 1000 mm |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
2 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Wingstabi 9 DR M-Link Receiver |
2 x | Micro clevis (10 uds) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Shirt Hispano Aviación |
1 x | Extractor piñones 2.3/3.2 mm |
3 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support pump Xicoy X45 |
1 x | Support Filtro FESTO |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Circlick securite |
2 x | Extension silicon 30 cm male (Graupner) |
2 x | Extension 15 cm (Futaba) |
1 x | Extension PVC 150 cm (Graupner) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Extension 7.5 cm |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Futaba Female 40 cm extension |
2 x | Extension silicon 50 cm (Graupner) |
1 x | Pine wood slat 10x10x1000 mm |
2 x | Tray JETI for DS-12 Black |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Screws of the Back Cover for DC Tx (10pcs.) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Precision wrench L100 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Universal Filter |
2 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | switch short 3-position DS Tx DUPLEX 2,4EX |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
2 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | RC Power Switch 5A |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Spinner NUT M8x1,25 |
1 x | Strip 2,5x1,25x330 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Harness for transmitter JETI DUPLEX |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Antenna holder bracket double |
1 x | Round Rod 2,5x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | 4 LiPo XH>EH adapter |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Ball Bearing Oil 25 ml |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | ANGEL 48" pp red/blue/white |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | DPS Switch JR/JR |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Nitroverdu 500 ml |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 30 cm BEC cable (female) |
1 x | DPSI Ampere battery backer |
1 x | CC 02 |
1 x | Propeller POWER-PROP 14x9 |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | 20-25mm Servo Arm |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Pilatus PC-21 50E RED/WHITE (SebArt) |
1 x | Fundas para el transporte F3A alas |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | EDGE 540-A 91" (2310 mm) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | ARS 300 91" ARF 2311mm ORANGE |
1 x | 20x15 Falcon electric V2 |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Oracover Black 10 m |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | Oratex Yellow Cub 10 m |
2 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Propeller APC 10x4.7 |
1 x | Mold plugs XT-30 |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Pistola termica MH 550 micro |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 55% silver electrodes (2 pcs) |
1 x | Heli blades angle measurer |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Winter Glove for DC |
1 x | Glass fabric 25 g (2 m²) |
1 x | Film release agent PVA 25 ml |
1 x | Black tray 2,4EX DC-16/14/24 black |
1 x | Switch for DS: Long 3 Position |
1 x | Bag JETI Duplex |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | wire tensioner (blue) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | Adjustable launching hook |
1 x | 13 mm wing servo holder |
1 x | Bidule 55 2460 mm Cabina |
1 x | 7 mm gas motor standoff |
1 x | Gear set HITEC HS-7950TH |
1 x | Gear set HITEC HS-65 HB |
1 x | Servo HITEC HS-311 |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC D954 TW |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 12x3.8 SF |
3 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Mini Lock Grips 2PCS |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Caps multicolor Switch JETI |
1 x | Holder for DC Transmitter/Tray DUPLEX 2,4EX |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Switch for DC: Long 3 Position |
1 x | DS-12/14/16 - Black nuts for upper switches - Front panel (2pcs) |
1 x | DC24 II Transmitter case insert |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Wire easy tensioner (red) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Propeller APC 15x10 Electric |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Bidule 55 V3 2460 mm |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Cabel "Y" 15 cm |
1 x | Servo HITEC D-955 TW Titanium |
2 x | Fiberglass plate 350x150x0.5 mm |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fabric 390 g/m² aero,10x1m |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 11x8.5 Electric |
1 x | Micro Fan |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 10x4.5 MR |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | XT-60 Plug Mold |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Sealing Iron STANDARD |
3 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Dremel PERMAGRIT thin lime |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Dremel 3000 130W |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Propeller diller for DLE170 |
1 x | Switch Cap M (black) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Heli digital angle measurer |
1 x | Propeller diller 5/6,3/8/9 |
1 x | MPX 8 pins plug mold |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Sealing Iron Profi LCD |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Dean-T Plug Mold |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Tube bender |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | 100g Flux Paste for Silver Solder |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
2 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | DSM 10 Dual Switch Mixer |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | JETImodel DPS 40 |
1 x | DUPLEX backpack for Jeti DS handheld transmitter |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Transmitter Stick Ends JETI DS-16/14 |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | EnLink 2RS Plus - DUO |
1 x | DUPLEX case for Jeti DS handheld transmitter |
1 x | Tension Springs (4pcs.) for DC/DS Tx DUPLEX 2,4EX |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | Car Charger DC/DS-16 |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Switch for DS: Long 2 Position |
1 x | Teacher / Student Cable |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Neck strap JETI DS |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | MiniFan 480 |
1 x | Midi Fan |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | wire tensioner (silver) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Small kwik link (10 pcs) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Metal clevis M2 (10 uds) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Metal clevis M3 (10 uds) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Albatros red/white (Top Model) |
1 x | Albatros ,spare cockpit (Top Model) |
1 x | Bidule 111 3000 mm |
1 x | Bidule 111 3000 mm Canopy |
1 x | 90x60 mm standart servo cover |
1 x | 58 mm micro servo cover |
1 x | 50x45 mm micro-mini servo cover |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | 57 mm micro-mini servo cover |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Servo HITEC D85 MG |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Servo HITEC D625 MW |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Gear set HITEC D645 MW |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
|
46,409.81EUR |