4 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Aluminium sheet 500x250x0,5mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
4 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
42 x | Buy Perforated film 100 cm / 50 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Buy Perforated film 145 cm / 50 m |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | Motor A2212/13T |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
2 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 6/20 with M3 Bearing |
3 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | 20 mm carbon horn |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Horn 5/20 with M2 Bearing |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
2 x | Premium servo extension 25cm |
1 x | Extension silicon 10 cm (Futaba) |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Extension silicon 30 cm female (Futaba) |
3 x | Prolongador S-Bus JR/JR 20cm |
1 x | Cable S.BUS 3 salidas 100 mm |
2 x | Extension silicon 30 cm male (Futaba) |
2 x | Extension silicon 100 cm (Futaba) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension lead 15 cm Multiplex |
1 x | 200 mm extensión servo HITEC/JR |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension 7.5 cm |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Extension 90 cm (Futaba) |
2 x | Premium servo extension 100cm |
2 x | Extension 15 cm (Futaba) |
1 x | Extension 30 cm (Futaba) |
1 x | Futaba Female 40 cm extension |
1 x | Premium servo extension 75cm |
2 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Futaba Female 40 cm extension |
2 x | Extension 100 cm (Futaba) |
2 x | Softshell Hispano Aviación |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Shirt Hispano Aviación |
2 x | Hovercraft sailcloth |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Smoke set "Glider" |
1 x | Extractor piñones 2.3/3.2 mm |
5 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | 110x55 mm C SLH KOVO wheel |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | CA Glue fast 20g |
3 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
3 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Straightened threaded rod M3 - 1m |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Extension PVC 150 cm (Graupner) |
2 x | Extension silicon 30 cm female (Graupner) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | DPSI Ampere battery backer |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Male connector for 20 pines AWG |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Miniature brass strap hinge, 1 m |
2 x | Spinner NUT M6 |
2 x | Spinner NUT M5 |
2 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Extension silicon 35 cm (Futaba) |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
1 x | Absorver mount set for 5-10 Kg models |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Support Pitot JETI |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
2 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
2 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
3 x | Motor MVVS 2.0/1120 |
1 x | Axi for MVVS 3.5 Sport |
2 x | Motor MVVS 5.6/690 GLIDER |
1 x | ABS 500 x 400 x 1 mm (white) |
4 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Female connector for 16 pines AWG |
1 x | Support XT60 conector (2 pcs) |
2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
2 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Support Filtro FESTO |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | SERVO DES 568 MG |
1 x | Servo HBS 690BB HV Digital |
1 x | SERVO DES 806 Pignons |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Adapter 3,0 mm M6 |
1 x | 3,2 mm Prop Adapter M5 |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | T-Hose connector 2-2-2 mm |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | FESTO Filter 4 mm |
1 x | Racor 4/3 mm |
1 x | Crimping tool |
1 x | Spinner NUT M4 |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | 100 Newtons FEMA absorber |
1 x | 150 Newtons FEMA absorber |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Bidule 55 2460 mm Cabina |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | QS Bulkhead Valve 4/4 mm |
1 x | FESTO connector M7 Quick 4 mm |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Racor 4/6 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Racor 2/3 mm |
1 x | Quick hose connector 6-6 mm |
1 x | FESTO Blanking plug G1/8 |
1 x | FESTO connector M7 Quick 4mm 90º |
1 x | FESTO Filter 6 mm |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Quick hose connector 4-3 mm |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Quick hose connector 3-3 mm |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Faucet FESTO |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Spinner NUT M8x1,25 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,0 mm |
1 x | Spinner NUT M5 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Spinner NUT M10x1 |
1 x | Spinner NUT 1/4x28 |
1 x | Spinner NUT M6 |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | 120x60 mm SLH KOVO wheel |
1 x | VBar Control Touch, midnight black |
1 x | Tail boom brace LOGO 480 |
1 x | VTX 477 Carbon Rotorblade |
2 x | BULL MØ1 2.600mm "ALPINE" |
2 x | Nose wheel 62 mm |
2 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
2 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
2 x | BULL MØ1 2.600mm "AeroPANDA" |
2 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Cap Hispano Aviación |
1 x | Blades 330mm |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | BULL MØ1 2.600mm RED |
1 x | Oracover Yellow CADMIO 10 m |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | ULTIMATUM 2.0 m red/black |
1 x | Wheel 18 mm |
1 x | ULTIMATUM 2.0 m orange/blue |
2 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
2 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Wheel 22 mm |
1 x | BULL MØ1 2.600mm BLUE |
1 x | BULL MØ1 2.600mm ORANGE |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | BULL MØ1 2.600mm YELLOW |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Landing gear axle Ø 4 mm (2 uds) |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | Wheel 28 mm |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | BULL MØ1 2.600mm (mono color) |
1 x | Wheel 38 mm V2 |
1 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Vest clothes Hispano Aviación |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | ULTIMATUM 2.0 m white |
1 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Propeller POWER-PROP 7x7 |
1 x | resin-hardener package L-385 with hardener H-385 |
|
81,402.79EUR |