Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]

Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)

Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "Joker 7"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Tow hook for tug
3 x	Fixed launching hook
1 x	Towing hook
1 x	Towing hook
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
2 x	Propeller APC 14x8.5 Electric Pusher
1 x	DUPLEX 2.4EX Central Box 210
1 x	Propeller POWER-PROP 13x9
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Brown 2 m
2 x	Glases Innovation Plus
1 x	2,4x1000 mm 2:1 black termoretract tube
3 x	Glases Stratus
1 x	ORACOVER Fluor red (2 m)
1 x	12,7x1000 mm 2:1 green termoretract tube
3 x	3,2x1000 mm 2:1 red termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Monokote ROJO misil (1.8x0.65m)
2 x	Oracover Azul Cielo 2 m
1 x	Oracover Black 2 m
2 x	Oracover Black 10 m
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover Azul 2 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
2 x	2,4x1000 mm 2:1 red termoretract tube
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	19 mm 2:1 black termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	MYLAR film A350 (1000x500 mm)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Oracover CHROME 2m
1 x	Glases Ace
1 x	6,4x1000 mm 2:1 red termoretract tube
2 x	Glases Nimbus "Black"
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Dremel PERMAGRIT 18 mm round lime
1 x
1 x	Pilot JAN 1/4 Saiplanes
1 x	Support pumb/filter Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Albatros red/white (Top Model)
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Avia (Top Model)
1 x	Bidule 55 2460 mm Cabina
1 x	Electric spoiler 250 mm (2 pcs)
2 x	eFuel 30A Power Supply
1 x	Canopy Astra
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Cockpit metalic closing
1 x	Head core
1 x	DPSI magnetic switch actuator (PCB)
1 x	Washer 2.2×4
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	LA500 nose
1 x	Cierva C30 Body Spain
1 x	Baering 3x8x4
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Blades 330mm
1 x	Rotorhead pushrod
1 x	Servo Fork
1 x	Baal link 4/14/4 (5 pcs)
1 x	Bearing 3x6x2,5
2 x	Screws flush mount M2
1 x	Extension silicon 35 cm (Futaba)
1 x	Socket head ball link M3 (2 uds)
1 x	Ball link M3 (6 uds)
1 x	Long ball link M1.6 (6 uds)
1 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Steel Screw M1x8 (10 pcs)
1 x	Steering lever
1 x	LA500 housing-lower cyclic
1 x	Tail boom
1 x	Head core bushing
1 x	Side rudder
1 x	Head runner
1 x	Head spacer
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Motor wall
3 x	Head upper part
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Motor rotor LA-500
1 x	Balls 4 mm
1 x	Cierva C30 Elevator
1 x	Side Plate
1 x	LOWER TOW HOOK
2 x	Screw M3x16
1 x	Cierva C30 spanish decoration Stickers
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
2 x	LASER 73" 1.85m (05) PILOT
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
2 x	Oratex Natural White 20m
1 x	Oratex Yellow Cub 10 m
1 x	LA500 Autogyro
1 x	SERVO HOLDER
2 x	VIPER 1.7 Electric break wheels + structure
1 x	PIT (Aero-Naut)
1 x	Propeller Pleg CAM-Prop 8x6
1 x	F-16 Scale 1/6 G3 Airex Deco: AF 916F
2 x	VIPER JET G2 Esq. 3 Orange/Black
2 x	VIPER JET G2 Esq. 2 Red/White/Silver
2 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
2 x	Jun-Si iCharger 4010 Duo
1 x	Esc KOSMIK 160 HV
1 x	Regulador Jeti Jes 045
1 x	Esc KOSMIK 160+ HV COOL
1 x	Esc MasterBasic 55SB
1 x	Connectors MPX male
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	16x8 BIELA propeller (3-blades)
1 x	BIELA 25x10 WILGA Propellers
1 x	Blade holder center GFK 0,5 mm
1 x	Propeller BIELA 20x12 5 Bl
1 x	Oracover Yellow CADMIO 10 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Complet landing gear
1 x	LA500 Blades
1 x	Wheel keeper washer
2 x	Nut M2 securing
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
1 x	Joint with bearing M3 22x5,5
1 x	Ball link M2,5 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Short ball link M1.6 (6 uds)
1 x	Ball link M1.6 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Long ball link M3 (6 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Propeller MASTER 7x6
1 x	23x10 BIELA propeller
1 x	Propeller POWER-PROP 11x8
1 x	Head lower part New
1 x	Propeller MASTER 7x5
1 x	Nut M2
1 x	26x8 BIELA propeller
1 x	25x14 4Bl Scale
1 x	Nut M1,6
1 x	Blade holder upper
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Oracover light Grey 2m
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover White 2 m
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Propeller POWER-PROP 12x6
1 x	Propeller POWER-PROP 16x10
1 x	Propeller POWER-PROP 14x12
1 x	Propeller POWER-PROP 15x8
1 x	Propeller electric carbon 6.5x4
1 x	Oracover White 10 m
2 x	Glases Nimbus
1 x	BEC extension JIVE
1 x	Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace)
1 x	Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x	Battery Lipo GENS 4000 mAh 7.4v TX
1 x	Glases Flitemaster
2 x	TWIST planeador gomas
2 x	Bird (Aero-naut)
1 x	Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace)
1 x	Glases Moritz
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Esc MasterSPIN 66 Pro
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	FAN KOSMIK
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	Pipa 3D F-16 Scale 1/6
1 x	Cable adapter iCharger

25,360.04EUR

Manufacturers

Notifications

Notify me of updates to Jun-Si iCharger 4010 Duo

Reviews

Write a review on this product!

Languages

Currencies

Insurance

440.00EUR

Jun-Si iCharger 4010 Duo[ROIJS137172]

under request

Jun-Si iCharger 4010 Duo
[ROIJS137172]