Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]

Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)

Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Xplorer4 anemometro
1 x	Xplorer2 anemometro
1 x	TrainerCord (master-learner)
1 x	3 LiPo XH>EH adapter
1 x	JETImodel SINGLE BEC
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger transmitter GRAUPNER
1 x	5 LiPo XH>EH adapter
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 02
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 05
1 x	30 cm BEC cable (male)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	30 cm BEC cable (female)
1 x	Circlick securite
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	BEC 3A FOXY
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	USB HLS prog. interface
2 x	Adapter lead MPX/EC3
1 x	Cap Hispano Aviación
1 x	DYNAMOMETER S-1580
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Servo NARO Max Std
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AX-60 starters (5 pcs)
1 x	Ply-Span 450x600/13g White
1 x	PCARD Wireless System
1 x	SERVO HOLDER
1 x	Long ball link M2 (6 uds)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Opto Gas Engine Kill Switch
1 x	SBEC 30 D
1 x	Multi-adapter balancer JST - TP
2 x	UBEC 6A KAVAN
1 x	Support pumb/filter Xicoy X45
1 x	BlueCom™ Adapter (iOS)
2 x	Battlife Guard 2s
2 x	Power Box GPS Sensor III
1 x	Charging Extension 50cm for 2 Battery
1 x	POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x	External LED's (2 pcs)
1 x	Shirt Hispano Aviación
1 x	PowerBox iGyro SAT
1 x	PowerBox MERCURY SR2
1 x	USB Adaptor OPTronics
1 x	2 piece mounting frame Battery 3200 / 4000
1 x	PowerBox 12
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x	CM-3
1 x	4 LiPo XH>EH adapter
1 x	Optical RPM Sensor
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 35 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	200 mm extensión servo HITEC/JR
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 10 cm (Graupner)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Aero-Master (Aero-naut)
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	ASG 32 560 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	TAKEO 3.6m electric
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	GRAFAS MAXI ARF
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	BABY glider (Aero-naut)
1 x	15x7 tree blades propeller
1 x	2.3 mm Adapter for 30 mm spinners
1 x	28 mm turnbuckle
1 x	38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	57 mm INO spinner (carbon imitation)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	F3A carbon 85 mm spinner for AXI
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	102 mm INO spinner (carbon imitation)
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	82 mm INO spinner (carbon imitation)
1 x	75 mm INO spinner (carbon imitation)
1 x	Cierva C30 Body Spain
1 x	Head lower part
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Nut M1,6
1 x	Steel Screw M1x8 (10 pcs)
1 x	Blade holder center GFK 0,5 mm
1 x	Propeller MEJZLIK 20x10 Electric light (36 g)
1 x	LA500 pilot-seat set
1 x	Balls 4 mm
1 x	PropCover 16-20" (1 pcs)
1 x	Tail support (2 pcs)
1 x	Ball joint long
2 x	Baering 3x8x4
2 x	Head spacer
1 x	LA500 cyclic central part
1 x	2 mm Prop Adapter M6
1 x	11x7 tree blades propeller
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	12x6 tree blades propeller
1 x	Switching module high voltage SXH
1 x	14 mm portholes (10 pcs)
1 x	SPS Remote switch actuator
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	29,0 mm propeller (rigth propeller)
1 x	25 mm fenders (10 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	16x10 tree blades propeller Master Airscrew
1 x	250 mm / 16 mm Airbrakes
1 x	15x7 tree blades propeller LEFT
1 x	USB interface ALTIS
1 x	3.2 mm Prop Adapter M6
1 x	290 mm 8x4 M4 shaft ship
1 x	2,3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M8
1 x	14 mm Portholes for screws (10 pcs)
1 x	31,0 mm propeller (rigth propeller)
1 x	3,2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	29,0 mm propeller (left propeller)
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	89 mm INO spinner (carbon imitation)
1 x	Spinner INOVA 102 mm Black
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Spinner 82mm Black ventilado
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	70 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	63 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Falcon Carbon Spinner 82mm for electric motor
1 x	Spinner INOVA 63 mm White
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	F3A carbon 95 mm spinner
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner INOVA 45 mm White
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	LA500 Autogyro
1 x	Cierva C30 spanish decoration Stickers
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Raer wall
1 x	Blades 330mm
1 x	Autogyro Cierva C30 Spain
1 x	Wheel keeper washer
1 x	LA500 nose
1 x	Cierva C30 Elevator
2 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Screws M1,6x6 Allen
1 x	Side rudder
1 x	Head core
1 x	Tail boom
1 x	Rotorhead pushrod
1 x	Servo Fork
1 x	Blade holder center
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	LA500 Blades
1 x	Head runner
1 x	Mobile Terminal
1 x	Servo-V-Limiter 5.2V
1 x	Filter Capacitor JR
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 10x4.7 SF
1 x	SLICK 360-B 104" (2640 mm)
1 x	ULTRA STICK 10 cc ARF
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	EDGE 540-A 91" (2310 mm)
1 x	Extension for LC-Display 50cm
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	PowerBox Champion SRS
1 x	Optotronix X-Carrier
1 x	BlueCom™ Adapter (Android / WP)
1 x	POWERBOX Magic Jeti Switch
1 x	Vest clothes Hispano Aviación
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	CYCLONE XT 6.2m ARF
1 x	Fascination 3600 mm (Top Model)
1 x	ALBATROS 3.0 m (orange/white)
1 x	ENIGMA ARF
1 x	IMPULSE 2 F3F
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 10x7 Electric
1 x	Propeller APC 12x3.8 SF
1 x	Propeller APC 10x4.7 SF Pusher

19,902.48EUR

Manufacturers

Notifications

Notify me of updates to Jun-Si iCharger 4010 Duo

Reviews

Write a review on this product!

Languages

Currencies

Insurance

440.00EUR

Jun-Si iCharger 4010 Duo[ROIJS137172]

under request

Jun-Si iCharger 4010 Duo
[ROIJS137172]