Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]



Cargador iCharger 4010 Duo

Contenido del Kit
Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)


Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity




under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
SAITO FG-120 TSS Boxer 4T
SAITO FG-120 TSS Boxer 4T
1,800.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 200cc Premium Muffler
1 x Silent-blocks DLE 170M
2 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x SERVO HOLDER
2 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x LOWER TOW HOOK
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Fixed launching hook
1 x Tow hook for tug
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Towing hook
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Adjustable launching hook
2 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon roving DowAksa / 24k / 1600 tex
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Towing hook
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x SE Ring 300 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Interface Realflight Simulator
2 x SE Ring 450 mm (2 pcs)
2 x SIMtransmitter 6 Mode 2
1 x EasyFLY Addon
1 x Marker ties (20 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Foil for sticking flaps and ailerons
2 x SE Ring 330 mm (4 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 240 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Vest clothes Hispano Aviación
1 x Softshell Hispano Aviación
1 x Cap Hispano Aviación
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Adapter lead MPX/EC3
1 x Small pinned hinge (12 uds)
1 x Propeller POWER-PROP 7x7
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Support Filtro FESTO
1 x Suncover 100cc Red
1 x Waterproof adhesive tape, width 19mm, length 25m
2 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x 5 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
2 x 6 mm Prop Adapter M8
1 x 3,2 mm Prop Adapter M8
1 x 20x200 mm battery rings
2 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x 
1 x Interface Jack Adapter IKARUS
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Xplorer3 anemometro
1 x Optical RPM Sensor
1 x Tube Pitot to PIXHAWK
1 x Aramid 50 daN 50 m
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x 5 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
2 x 2 mm Prop Adapter M5
2 x 3 mm Long Prop Adapter M5
1 x 6 mm Prop Adapter M8
1 x Support ECU Xicoy X-45
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support pumb/filter Xicoy X45
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Fiberglass plate 620x540x0,2 mm
1 x Fiberglass plate 620x540x2,0 mm
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Fiberglass plate 350x150x4.0 mm
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Fiberglass plate 620x540x1,0 mm
1 x Fiberglass plate 350x150x2.0 mm
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x 102 mm INO spinner (carbon imitation)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x Spinner INOVA 45 mm White
1 x 89 mm INO spinner (carbon imitation)
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x F3A carbon 95 mm spinner
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x Cono NUT 5/16"x 24 -M4
1 x 82 mm INO spinner (carbon imitation)
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x Spinner INOVA 63 mm White
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x 57 mm INO spinner (carbon imitation)
1 x Spinner INOVA 102 mm Black
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Falcon Carbon Spinner 82mm for electric motor
1 x 4 mm Prop Adapter M6
2 x 2,3 mm Prop Drive Günther M4
2 x 3,2 mm Prop Adapter M5
1 x 3 mm Short Prop Adapter M5
1 x 2 mm Prop Adapter M6
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x 4 mm Prop Adapter M8
1 x 2,3 mm Prop Adapter M6
1 x Prop Shaft Adapter 8 mm/M12 "long"
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Cinta Goldfix 1m
1 x Kontronik ProgUnit
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Paramotor Trike XL
1 x 2,3 mm Prop Adapter M6
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Power supply NT 40 Amp.
12,899.77EUR
Manufacturers
Notifications
NotificationsNotify me of updates to Jun-Si iCharger 4010 Duo
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce