Top » Catalog » Hardware » Chargers » Chargers » iCharger » ROIJS137172

440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]

Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)

Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	RH long aluminium horn (2pcs)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
2 x	Cable control set
3 x	Small aluminium horn gold (2pcs)
1 x	6 mm aluminium horn with patella
2 x	Horn 6/35 with M3 Bearing
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x	Small aluminium horn red (2pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Cable with accesories
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
2 x	Horn for flap control (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
3 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Softshell Hispano Aviación
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	SUS wire 3m (nylon coated)
1 x	Canopy Latch
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	USB Mini Camera endoscope
2 x	Horn mando long (2 pcs)
2 x	Horn micro type4 Ø 0,5 (2 pcs)
2 x	Brass control horn M2 long for wire (10pcs)
3 x	Extra long horn 60x30
2 x	6 mm M3 variable horn
3 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Micro control horn T2 Ø 1
3 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	5 mm M2 variable inclined horn
1 x	Adjustable brass horn threaded M3
3 x	Long horn 50x26
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
3 x	Horn DU-BRO 1/2 (2 pcs)
2 x	Horn DUBRO 1/2A
1 x	Long extra-strong control horn with bearing 2,8x34
2 x	Micro control horn (2 pcs)
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	LH long aluminium horn L31xH30 (2pcs)
2 x	6 mm M3 variable inclined horn
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Horn with ball 55x40
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	5 mm M2 variable horn
2 x	Horn 5/20 with M2 Bearing
3 x	Horn mando small (2 pcs)
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x	BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
2 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	FOX MDM-1 3.500 mm ARF White
1 x	LO 100 ARC 3.3m,frame canopy
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Foam plastic plates (310x210x2 mm)
1 x	Fox MDM-1 ARF 3.5m Orange
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Ventus 1:4 set of instruments
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	GP 15 JETA
2 x	Styrene plate 320x120x0.5 mm
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	DG-303 ACRO 3750 mm, winglets
1 x	Fox MDM 1 4000 mm DeLuxe
1 x	Fox 4000 mm with flaps (Airwold)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Foam plastic plates (310x210x8 mm)
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Fournier RF-4D
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Carbon plate 350x150x1.5 mm
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Small control horn with bearing (2 pcs)
2 x	Rudder forward 90x28 "type Kato"
1 x	PBS TJ 40-G2 Turbine
1 x	Long adjustable control horn with bearing
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn with ball 40x30
1 x	Brass control horn M4 short for wire (4 pcs)
2 x	SlowFlyer control horn (3 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Control horn long w/ball
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	Avanti S 2.3m Jet WHITE/BLUE (SebArt)
1 x	Fascination 3600 mm (Top Model)
1 x	Aero-Master Cabine (Aero-naut)
1 x	LO 100 ARC 3.3m
1 x	Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt)
1 x	Gobe R-26S (Airwold)
1 x	Avanti XS Jet , Fuselage Stand (SebArt)
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	Colormatic 2K Soft fine putty white, 1 kg
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	BETA 1400 RTF Red
1 x	Rudder forward 70x28 "type Kato"
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Cable coupler M2 (10 uds)
1 x	Blade holder metal LAMA
1 x	Adaptadores carga 6s JST-XH
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)

45,392.38EUR

Manufacturers

Notifications

Notify me of updates to Jun-Si iCharger 4010 Duo

Reviews

Write a review on this product!

Languages

Currencies

Insurance

440.00EUR

Jun-Si iCharger 4010 Duo[ROIJS137172]

under request

Jun-Si iCharger 4010 Duo
[ROIJS137172]