Top » Catalog » Hardware » Chargers » Chargers » Gens Ace - Tattu » GENSTA1200C

900.02EUR

TA1200 Charger Compatible with Smart and Standard LiPo Batteries
[GENSTA1200C]

TA1200 Charger Compatible with Smart and Standard LiPo Batteries

INSTRUCTION
This charger is capable of charging 2 sets of lithium batteries simultaneously. The maximum power output is 1200 watts per channel. User can select between Charging mode and Maintenance mode. Charging current is adjustable between 10A, 20A and 30A. It also has over-current, over charging, over temperature, safety cut off, fast equilibrium and status indicator functions. With the charging manager TA1200 and the chargers UB-MG-Fast/UB5 combined, single charging manager can connect up to 5 sets of batteries simultaneously and charges alternately for the 5 sets of batteries on basis of charging saturation from high to low. If the charger TA1200 connects with 2 charging managers UB5/UB -MG-FAST, It can charge 10 sets of battery simultaneously. With double LCD display equipped, the charger automatically indicates real time charging status, charging voltage, charging current, charging time, battery capacity and cell voltage.There have two lipo batteries we recommend. Tattu Plus 1.0 16000mAh 15C 12S1P and 22000mAh 25C 12S1P

SPECIFICATIONS
- Input: 100-240V 18A 50/60Hz
- Output: Max50.4V Max.25.0A
- Max Output Power: 100-120V Max Output Power 750W×2CH /180-240V Max Output Power 1200W×2CH
- Type of Battery: LiPo/LiHV/Smart Battery
- Cell Count: 12S
- Channel Count: Dual Channel(10 Channels with 2 charging managers)
- Balance Tolerance: ±20mV
- Input Protection: Over Current Protection
- Output Protection: Over Voltage/Under Voltage/Short Circuit/ Over Temperature/Reverse Polarity
- Working Environment Temperature: 0℃-40℃/32℉~104℉.
- Cooling System: Cooling Air
- External Upgrade Port: Micro USB
- Dimensions: ≈325×190×280.5mm
- Weight: ≈9.2kg

OPERATION
The TA1200 charging manager is a dual channel charger with independent outputs. Each channel operates independently.When the charger is used incorrectly or there is a failure, the charger will display an error message.
1. Startup and Self Test
Be sure all cable connections are correct. Power the unit on. The LCD display, Led Indicator lights should come on. When the charger completes, it’s self test the buzzer will sound.

2. Operation Modes
Charging Mode: Charging Mode will balance charge the battery quickly. Maintenance Mode: When a battery has been on the shelf for a long period of time, it is recommended to use maintenance mode. If the battery life declines or the battery is out of balance greater than 50mV, Maintenance Mode will charge or discharge the battery using a small current to put the battery into proper storage voltage.

3. Setting Working Current
Use the current switch to complete the current setting based on battery capacity.

4. Charging
Long press the charge button for more than 2 seconds to begin charging immediately, or charge will start automatically after 10 seconds after connections are made.

1. Red Light On: the charger is charging the battery and the LCD display indicates real time charging status.
2. Green Light On: Charging is complete.

Note: When using Continuous Working Mode, the charger automatically runs a series of operations. These automatic operations include starting, stopping, testing and switching. When using Continuous Working Mode, the charger will resume charging automatically if the battery is not removed within 30 seconds of pressing the stop button.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	ABS angle 2,0x2,0x1000 mm
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	1/6 Pilot "Cindy"
2 x	Pilot "Goose" (Slimline)
2 x	Pilot "Duke" Legends Series (Slimline)
2 x	U Profile ABS 2,0x4,0x1000 mm
2 x	Piloto JET 1:3,5
1 x	L-Connector 1.0 mm x 1000 mm
1 x	1/12 Pilot "Fighter"
1 x	1/6 Pilot "Tony"
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	ABS angle 4,0x4,0x1000 mm
2 x	1/4 Pilot "Heidi"
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	ABS angle 6,0x6,0x1000 mm
2 x	Profile ABS Square 4 x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
2 x	ABS angle 3,0x3,0x1000 mm
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
2 x	1/4 Pilot "Mike"
2 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	1/6 Pilot "Garry"
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
3 x	Profile ABS Square 2 x 1000 mm
1 x	1/12 Pilot "Cougar"
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	ABS angle 5,0x5,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
2 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	U Profile ABS 8,0x4,0x1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	1/12 Pilot "Tom"
1 x	Piloto Jet "Red" 1/6 Scale
2 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	M3 black washers (4 pcs)
3 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Vacuum bag, 1200 mm x 50 m
3 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cinta Goldfix 1m
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	PPM Encoder Module
1 x	PIX Hawk with accesories
1 x	Tube Pitot to PIXHAWK
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	One touch canopy lock
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Canopy Latch
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Bungee HLG Premium
1 x	800TVL CMOS camera for FPV
1 x	Extinguisher CO2 - 2 Kg
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Ferrita con funda
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Oracover Orange 2 m
1 x	Oracover Brown 2 m
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	Civilian pilot "Joe" size 9cm (Slimline)
3 x	1/7 Pilot "Japanese"
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS half cane 3x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	1/6 Pilot "Buddy"
3 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Spring pin Ø 2 x 6 mm (10 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
2 x	Styrene plate 320x120x1.0 mm
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
2 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
2 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Release film 100 cm x 50 m
1 x	Socket Head Screw M2,5x12
1 x	Buy Perforated film 100 cm / 50 m
2 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Socket Head Screw M2x12
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Threaded insert M5 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Servo M2x7/16 screw (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Buy Perforated film 145 cm / 50 m
2 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Buy Perforated film 100 cm / 20 m
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Chopped glass fibre strands 3 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Cross Connector 4.0 mm x 1000 mm
2 x	Pilot JAN 1/4 Saiplanes
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Propeller POWER-PROP 7x7
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x
2 x	Tip wing protector 40x14 (2 pcs)
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	50 mm white plastic spinner for fixed propeller
1 x	Landing gear frontal support 25x32x16
1 x	Allen wheel collar M4x6
1 x	Pushrod octagone 4/3
1 x	Snap for floding prop for 2 mm axi
1 x	Tape GFK 50 mm
1 x	Split pin 1x8 mm (10 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Window mounting channel 5m
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	20x200 mm battery rings
1 x	Ring 320 mm length (5 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	140 mm rods set for direction control
1 x	Steering arm 12 mm Ø 4 mm
1 x	Lead with adhesive (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Allen wheel collar M3x3
1 x	250 mm / 16 mm Airbrakes
1 x	2,3 mm Prop Adapter M6
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	USB Mini Camera endoscope
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Pilot "Anthony" (Slimline)
1 x	1/6 Pilot "John"
1 x	Wing Joiner BULL MØ1 2.600mm
1 x	Bags BULL Mo1 2.6m "Luxe"
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Styrene plate 320x120x0.5 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x	Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts)
1 x	Piloto jet 130 mm
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Pipa 3D F-16 Scale 1/6
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Nitroverdu 500 ml
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Screw M2x8 (10 pcs)
1 x	Painting GHT Lexan Black 150 ml
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Landing gear frontal support 29x26x13,5

16,206.31EUR