140.00EUR

HITEC Power Supply 30A. Max. 540w
[MU114121]


Switched power supply HITEC, universal, compact and very powerful! It adapts perfectly to the multi-charger X-4 AC PLUS, which can be connected directly through the gold connectors 4 mm. You can power several chargers simultaneously but for optimal performance please check that the sum of their powers does not exceed 540W.

  Features:
- 2 exits, up to 30A between the two
- Adjustable output voltage 12 - 18V
- Large LCD display for voltage and current
- 2 USB outputs, 5V, up to 1000 mA to load MP3 players, mobile phones and digital cameras
- Controlled fan
- Overload protection
- Overtemperature protection
- Protection against short circuits

  Set:
Charger, network power cord, English / German manual

  Technical specifications
Width: 139mm
Height: 60mm
Length: 218mm
Weight: 1.62 Kg
Input voltage: 100-240V AC
Power: 540W
BID-chip system: No

  We recommend
Check the maximum input voltage accepted by your charger, not all can support a voltage of 18V, not that this source does not work for some chargers but it may be necessary to adjust its voltage to not exceed the maximum accepted by the charger.


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 8.0x6.0x1000 mm
2 x ABS tube 14.0x10.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x ABS tube 3.0x2.0x330 mm
3 x ABS tube 20.0x18.0x1000 mm
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Long pinned hinge (6 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x Flap hinge 33x9 mm (6 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x Gates hinge
1 x Propeller POWER-PROP 14x9 Izda
1 x 25 mm reinforced hinge
2 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 15 mm reinforced hinge
1 x LASER 73" 1.85m (05) PILOT
1 x Miniature brass strap hinge, 1 m
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Small pinned hinge (12 uds)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Gates hinge aluminium (1 pcs)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 1/12 Pilot "Tom"
1 x Painting GHT Lexan Black 150 ml
1 x M3-M4 rubber washer (8 pcs)
1 x Gold antispark 5,5 mm plug
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Turbo light spinner cap white 32mm
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Extension silicon 35 cm male (Futaba)
1 x Spinner propeller pleg. 38 mm / 5 mm
1 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Recessed MPX connector support (6 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Flap hinge (6 pcs)
2 x ABS tube 8.0x7.0x1000 mm
1 x Frontal Adapter for AXI53xx
1 x BALSA trip 3.0x5.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x 3,2 mm Prop Adapter M5
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
2 x ABS tube 6.0x4.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Fiberglass tube 6/4x1000mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Blades 330mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Small flex hinge (12 uds)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin hinge 26x11 mm (10 uds)
1 x Indoor hinge with servo arm integraded
1 x Large flex hinge (12 uds)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Micro flex hinge (12 uds)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x BLUE Colored Liquid smoke for turbine 0.75 l
1 x GPS Altis
1,484.06EUR
Manufacturers
Manufacturer Info
MULTIPLEX
MULTIPLEX Homepage
Other products
Languages
Español English
Currencies