1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
3 x | Ferrita 17x10x6.5 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
3 x | Tow hook for tug |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
3 x | Extinguisher CO2 - 2 Kg |
1 x | Fixed launching hook |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Towing hook |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Adjustable launching hook |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Towing hook <3m |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | SERVO HOLDER |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Conector MR-60 (pareja) |
2 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Adaptadores carga 6s JST-XH |
2 x | Starter EM Gear Power 80 |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
4 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Cable Cargador FUTABA |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | ABS angle 2,0x2,0x1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
3 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
2 x | |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
3 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
4 x | Rudder 2_Tray 4~4.5 inch |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
3 x | Vacuum pump P1-N |
1 x | Servo Mount S (red) |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | 2,5x60 mm allen screwdriver |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
2 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Starter EM Gear Power 250 |
2 x | Dust collector for mould cleaning |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
2 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
3 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Ball Link Plier |
2 x | Screwdriver for Torx® TX6 |
2 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
3 x | Starter Sullivan-STAR 601 |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Hot Glue Stick RED |
2 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
3 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
2 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
2 x | Rudder 2_Tray 4.5~5 inch |
1 x | Cut tube |
3 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Copier 2x20 cm pcs |
2 x | Copier 5x20 cm pcs |
3 x | Screwdriver for Torx® TX8 |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
2 x | Vacuum pump 12 CFM |
2 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Z Bender - S Type Tool |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Adapter rotula M3 |
1 x | EasyFLY Addon |
1 x | Futaba 2x20 mm servo double arm |
2 x | Servo TT ACE SHV 1504 MG |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Futaba 25 mm servo arm with M3 ball link |
2 x | Slave-cable USB Easy Sim |
1 x | Futaba 38 mm servo arm with ball link |
1 x | Futaba 25 mm servo arm with ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
2 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Futaba 52 mm servo arm |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 54 mm servo arm with ball link |
2 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | Futaba 38 mm servo arm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | SIMtransmitter 6 Mode 2 |
1 x | XTorque CFK Servohebel 38 |
1 x | Hitec 20 mm servo arm |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
2 x | Interface Jack Adapter IKARUS |
1 x | Futaba 30 mm servo rounded arm |
1 x | Futaba 20 mm servo arm |
1 x | Paint gun for sprays |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Spray EC Red 400ml |
1 x | Servo HITEC D625 MW |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | 5 mm M2 variable inclined horn |
1 x | Small Crow DLE-170M |
1 x | 15 mm reinforced hinge |
1 x | SE Ring 240 mm (2 pcs) |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Ferrita 14x8x5.5 mm |
2 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Keypad ALTIS V4 |
1 x | Angle support XT60 conector |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Screwdriver for Hexagon 1,27mm |
2 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 2,3 mm Prop Adapter M6 |
2 x | 2.3 mm Adapter for 30 mm spinners |
2 x | 3.2 mm Prop Adapter M6 |
2 x | 5 mm Prop Adapter M6 |
2 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Blade holder center |
2 x | Head core |
1 x | Steering lever |
1 x | Round Rod 1.0x3.5 cm |
1 x | Silicone red 2,5 qmm wire ( 25 m) |
1 x | Silicone black 4,0 qmm wire (25 m) |
2 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | White silicone 0,25 qmm wire (150 m) |
2 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Tachometer HANGAR 9 digital |
1 x | Sealing Iron Profi LCD |
2 x | Z Bender - S Type Tool |
1 x | Schul-Malpinsel Gr.5 |
2 x | Smart Soldering Iron 110W/230V AC |
2 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
2 x | White large kwik link (10 pcs) |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Metal clevis M3 (10 uds) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Threaded coupler M2 (10 pcs) |
2 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Head lower part |
2 x | Raer wall |
1 x | Screw M3x16 |
1 x | Blade holder lower |
1 x | Nut M1,6 |
2 x | Head upper part |
1 x | Head runner |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Screws flush mount M2 |
2 x | Head core bushing |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Tool for entel |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | wire tensioner (black) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
2 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
3 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Steel brush wheel with 2.35mm |
1 x | Silicone red 6,0 qmm wire (25 m) |
1 x | Threaded coupler M2,5 (10 pcs) |
3 x | Profile ABS Square 1 x 1000 mm |
2 x | Servo GO-02 Digital 1.8g |
2 x | U Profile ABS 1,0x2,0x1000 mm |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Silicone red 2,5 qmm wire ( 1 m) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Crimping tool |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Dremel 3000 130W |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | 55% silver electrodes (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | LiPo Storage Box Type "BIG" |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | TX 250 mW especial GOPRO |
2 x | Cable video GoPro and 5V cable |
3 x | Cable video GoPro |
1 x | Ferrita 27x14x7 mm |
1 x | PPM Encoder Module |
3 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Device Terminal |
1 x | Altimeter Altis V4 |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 12x6 Electric |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Propeller APC 11x7 SF |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Blade holder upper |
1 x | Micro clevis (10 uds) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
2 x | Cierva C30 simulated motor |
2 x | Profile ABS half cane 8.0x1000 mm |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Wire easy tensioner (red) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | LA500 pilot-seat set |
1 x | LA500 housing-upper cyclic |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Cierva C30 Elevator |
1 x | Ball joint long |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | DUPLEX 2.4 EX MVario2 |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Tachometer Hyperion Multi-pala |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | 10-15mm Servo Arm |
1 x | 4 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | TWIST planeador gomas |
1 x | 5 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 2 mm Prop Adapter M6 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 10 mm Prop Adapter M12 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Screws M1,6x6 Allen |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Complet landing gear |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | USB programador GO servos |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | 100 mm rods set for direction control |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | LA500 rotor head core |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Servo Mount M (blue) |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Sealing Iron STANDARD |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Sealing Iron Sleeve STD |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Snap for floding prop for 2 mm axi |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | Ferrita con funda |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm "Z" carbon |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod octagone 3/2 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | PIX Hawk with accesories |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 6,0 mm |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Spinner propeller pleg. 32 mm / 5,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | One touch canopy lock |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/5º |
1 x | Medidor ángulos y/o incidencias |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Blades 330mm |
|
15,778.61EUR |