1 x | Shirt Hispano Aviación |
2 x | ESC Actro-Marine 30A |
1 x | Liferaft 47 mm |
1 x | Fueraborda RETRO |
1 x | Barandilla Ms 10x250 mm (2 pcs) |
1 x | Ancla 40 x 24 mm (2 pcs) |
1 x | Ancla Admiralsanker 60 mm (2pcs) |
1 x | Stick coupler Ms 15 mm |
1 x | Electronic fog horn |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | Aqua RACE 70 (without motor) |
2 x | Ancla Met. 16 mm (5 pcs) |
1 x | Anchor 25 mm (2 uds) |
1 x | Motor ACTRO 35-4-1100 |
2 x | Anchor of tow Met. 60 mm |
1 x | Side Plate |
1 x | Screws M1,6x6 Allen |
1 x | Head spacer |
1 x | Head lower part |
1 x | Raer wall |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Allen wheel collar M4x6 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Cable coupler M2x66 (2 uds) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | ABS angle 1.5x1.5x1000 mm |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | 100 mm rods + T patellas set for direction control |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
2 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
2 x | Straightened threaded rod M2-1m |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Balsa panel 1.5x100x1000 mm |
2 x | Clip mini fixing for wing (2 pcs) |
3 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Connector CAN 15 |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Rotorshape Autogyro |
1 x | 4 blades set |
1 x | Screws flush mount M2 |
1 x | Rotorhead pushrod |
1 x | Wheel keeper washer |
1 x | Cierva C30 Elevator |
1 x | Baering 3x8x4 |
1 x | Head core bushing |
1 x | Head runner |
1 x | Valve spring SAITO 120 |
2 x | Crankshaft SAITO 120 4T |
1 x | Propeller RABOESCH M4 70 mm (5 Blades) (Left) |
1 x | Catalog AERO-NAUT 2016 |
1 x | Carburador SAITO FA-120 4S glow |
1 x | 42,0 mm propeller (left propeller) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | "S" set for boats |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 290 mm M5 Prop shaft |
1 x | Motor ACTRO 28-4-880 |
1 x | 33,0 mm propeller (left propeller) |
1 x | Propeller AERO-NAUT M4 73 mm (7 Blades pr) (Right hydropropeller |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller |
1 x | Propeller RABOESCH M4 45 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M5 60 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller RABOESCH M4 55 mm (5 Blades) (Right hydropropeller) |
1 x | Propeller AERO-NAUT M5 0 mm (4 Blades) (Left hydropropeller) |
1 x | Propeller Ms 65R (rigth propeller) |
1 x | COMPACT drive 26/45-20 DL=175 motor |
1 x | SERVO HOLDER |
1 x | Towing hook |
1 x | Towing hook <3m |
1 x | Cleat 20 mm (2 pcs) |
1 x | Campana Ms 14 mm (5 pcs) |
1 x | Cleat 10 mm (2 pcs) |
1 x | Fan metalic 21 mm |
1 x | Deck Lamp with Reflector Ø 22 mm 3 V |
1 x | Adjustable launching hook |
1 x | Coupling bush 5 - 5 mm |
1 x | Capstan of plastic 125x72x45 mm |
1 x | Double BLOCK 3x9x5 mm (3 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Snap for floding prop for 2 mm axi |
1 x | Cockpit plastic closing |
1 x | 80 mm rods set for direction control |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | RX cabel |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora |
1 x | Propeller APC 11x7 Electric |
1 x | Propeller APC 10x10 Electric |
1 x | Propeller APC 12x6 Electric |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Propeller APC 12x8 Electric |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Battery bed V2_S (black) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Battery bed V2_M (black) |
1 x | Blade Holder Full (4 blades) |
1 x | Cable coupler M2 (10 uds) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Black large kwik link (10 pcs) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | 200 Newtons FEMA absorber |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | One touch canopy lock |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Rubber profile 10-2 mm 2M |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Window mounting channel 5m |
1 x | Servo MKS HV 777A+ |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Propeller APC 11x3.8 SF |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Servo MKS HV1220 |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Propeller APC 12x8 SF |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Servo BMS-4112 |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Servo BLS-M55B 61.2kg |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 13x6.5 Electric |
1 x | Propeller APC 12x10 Electric |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Servo MKS HV6130 |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Brass wire 0.30 mm (25 m) |
1 x | Block 1Rolle 5x7x3 mm (5 pcs) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Block 1Rolle 3x7x3 mm (5 pcs) |
1 x | Bandera Frankr 4x6 |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | BLOCK m.Ose Ms vern 12 |
1 x | Block 21x19 mm (5 pcs) |
1 x | Boat vents 10mm (2pcs) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Anchor 80 mm (2 uds) |
1 x | Bronze bearings Ø 5 x Ø 8 x 8 mm |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | BALL BEARING CRANKSHAFT SAITO 120/125/150/180/220 4T |
1 x | Brass wire 0.5 mm (25 m) |
1 x | Anchor 50 mm (2 uds) |
1 x | Cabestrante plastico 5x6 mm (10 pcs) |
1 x | Anchor 25 mm (2 uds) |
|
4,739.61EUR |