Top » Catalog » Boats/Naval units » Ships » ROIALPHA1BLARTR

489.00EUR

ALPHA 1000mm BL ARTR
[ROIALPHA1BLARTR]

JOYSWAY 8901 - ALPHA BRUSLESS - RED
This new high powered speedboat from Joysway is anything but lacking power. It's water cooled powerful brushless outrunner motor and potential for a 6S LiPo pack plenty of punch.
With a Hull length of over 1 metre, this is a big model with the speed to match. The powerful 9Kg included steering servo offers great turning even at high speeds.
Have great fun on the boating lake with a solid all round performer, capable of high speeds, sharp turns and hours of fun!
Specifications:
Hull Material: Molded Plastic
Length: 1060 mm (Total)
Length: 950 mm (Hull)
Weight: 2.6 kg (without battery)
Beam: 260 mm

INCLUDED:
Motor: Water cooled Powerful Out-runner brushless Motor
ESC: Seaking RTR 90A water cooled and water proof brushless
Servo: Powerful 9 kg high torque metal gear servo
CNC aluminum alloy Rudder
Stainless steel turn fins and trim tabs
Shaft drive system: 5 mm flex cable drive
P1.4 x 60 mm two blade metal propeller (4S - 5S LiPo, Speed 60 km/h - 70 km/h)
P1.4 x 56 mm two blade metal propeller (6S LiPo, Speed 80 km/h)

REQUIREMENTS:
4S (or two 2S in series) 5000mAh 35C LiPo (Not included, race with 460/2 metal prop, 60kmh)
5S 5000mAh 35C LiPo (Not included, race with 460/2 metal prop, 70kmh) 6S (or two 3S in series) 5000mAh 35C LiPo (Not included, race with 456/2 metal prop, 80kmh)
Transmitter 2ch

under request

Reviews

Quick Find

Shopping Cart

1 x	CC 01
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Cabel charger transmitter GRAUPNER
1 x	30 cm BEC cable (male)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	Connector Sub-D 2+5 Male
1 x	Dean "T" - Futaba Adapter
2 x	CC 03
1 x	Connector CAN 15
1 x	30 cm BEC cable (female)
2 x	CC 05
1 x	CC 02
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	UBEC 6A KAVAN
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
4 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	2 LiPo XH>EH adapter
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	3 LiPo XH>EH adapter
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	DPS Switch JR/JR
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	DPSI magnetic switch actuator (housing)
1 x	Circlick securite
1 x	Softshell Hispano Aviación
1 x	Shirt Hispano Aviación
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	5 mm M2 variable horn
1 x	6 mm M3 variable inclined horn
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	5 mm M2 variable inclined horn
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn mando long (2 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Extra long horn 60x30
1 x	Horn 6/27 with M3 Bearing
1 x	20 mm carbon horn
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Angled clevis with threaded rod M3
1 x	Long ball link M3 (6 uds)
1 x	SPARK Switch 5.9v
1 x	PSC 5
1 x	5 LiPo XH>EH adapter
1 x	Cabling for Fox MDM1 wings
1 x	Support conector MPX (6 pcs)
1 x	Extension 5 lipos JST - JST/C
1 x	PSC 6
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Interruptor RX/Batterie
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x
1 x	2,0x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Brass wire 0.5 mm (25 m)
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Fresa corte diamante Ø 2.35mm (lentil)

1,140.07EUR