Top » Catalog » Outlet Zone » Controlers » KON4002

50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
  Helicopter
  Multicopters
  Planes
  Spare parts
  Motors
  Controlers
  Accesories
  Battery / Charger
  Turbine
  Crystal
Used
Merchandising HA
What's New?
SAVAGE Max Red 1080 mm
SAVAGE Max Red 1080 mm
129.90EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
2 x AX-60 starters (5 pcs)
2 x White smoke bombs AX-9 (10 pcs)
2 x PCARD Wireless System
1 x White smoke bombs AX-3 (10 pcs)
1 x B4-0 rocket charges (6 pcs)
2 x Ventral support for AX-18/AX-60
1 x Initior Receiver FRX2 Wireless
2 x Green smoke canister 100 g
1 x Green smoke canister 65 g
1 x "S" set for planes
3 x Red smoke canister 140 g
1 x Red smoke canister 65 g
1 x Initior Transmitter FTX2 Wireless
1 x "M" set
1 x Blue smoke canister 140 g
2 x Parachute expulsion foam
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x White smoke canister 65 g
1 x Parachutist
1 x White smoke bombs AX-60 (5 pcs)
2 x Blue smoke canister 100 g
2 x Yellow smoke bombs AX-60 (5 pcs)
2 x Smoke set "M"
3 x Yellow smoke canister 65 g
1 x Black smoke bombs AX-60 (5 pcs)
1 x Trike XL motor set (motor+esc+prop)
2 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x Paramotor BackPack XXS (without accessories)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x Black silicone 0,25 mm² wire (25 m)
1 x Windsock Ozone L - 700 mm
2 x White silicone 0,25 qmm wire (150 m)
1 x Rescue 1,8m2 / BackPack
1 x 10m servo "Premium" wire (white/red/blue)
1 x Cable Cargador FUTABA
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x Ballast 700gr OPALE
1 x Paramotor BackPack XXS 2
1 x Wing OXY 0,5 pulgadas2
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
2 x White silicone 0,25 mm² wire (25 m)
1 x LUCAS pilot ARTF
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Para-RC Mix
1 x Paramotor Trike XL
1 x Opale Rucksack
1 x 200m servo "Premium" wire (white/red/blue)
2 x White silicone 0,25 qmm wire (100 m)
1 x Set cintas unión paracaídas 145 cm
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
2 x Blue metalic ball link M2/2 azul (2 pcs)
2 x M3 Maxi ball link (2 uds)
2 x Ball link M2,5 (10 pcs)
3 x M3 Maxi ball link (2 uds)
1 x 6 mm ball link M3 (10 pcs)
2 x Long ball link M3 (6 uds)
1 x Joint with bearing M3 22x5,5
1 x M3 Maxi ball link (2 uds)
2 x Socket head long ball link M3 (6 uds)
1 x Ball link M3 (10 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Ball link M2 (10 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Joint with bearing M2,5 22x5,5
3 x SE Ring 480 mm (2 pcs)
2 x ABS tube 8.0x6.0x1000 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Cinta Goldfix 1m
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x ABS tube 9.0x7.0x1000 mm
1 x 20x1000 mm Ring Strap Back To Back
2 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x ABS tube 3.0x2.0x330 mm
3 x Tape GFK 50 mm
1 x ABS tube 3.0x2.0x1000 mm
2 x Tape GFK 38 mm
3 x ABS tube 10.0x8.0x1000 mm
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
2 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x ABS tube 5.0x4.0x156 mm
3 x 
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x SE Ring 400 mm (2 pcs)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ABS tube 5.0x3.0x1000 mm
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Strip 1,5x1,5x330 mm
1 x ABS I Strip 10x5x1000 mm
2 x Round Rod 1,5x1000 mm
1 x LASER 73" 1.85m (05) PILOT
1 x Round Rod 5,0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x DUPLEX 2.4EX Central Box 210
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
2 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Propeller POWER-PROP 13x9 Izda
1 x Strip ABS 2.0x10.0x1000 mm
2 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Propeller POWER-PROP 14x9
1 x ABS Strip 1.0x2.0x1000 mm
1 x Screwdriver for Hexagon 1,27mm
1 x SERVO HOLDER
1 x 25 mm reinforced hinge
1 x Profile ABS Square 3 x 1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x AX-60 starters (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
2 x Smoke set "S"
2 x Plastic caps for AIR BURTS (30 pcs)
1 x Yellow smoke canister 100 g
1 x Red smoke canister 100 g
1 x Smoke set "Glider"
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Electric rocket starters (6 pcs)
1 x Servo Controller Fibra optica
1 x Program 5v SIO RS 232
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Swing 1000
1 x 1 m servo "Premium" wire (white/red/blue)
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
3 x ABS tube 20.0x18.0x1000 mm
2 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x TMM 1210-3S heli
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Crystal Universal RX 35.140 Ch 74
2 x ABS tube 4.0x2.0x1000 mm
1 x Aramid 50 daN 50 m
1 x Silicone red 1,0 qmm wire ( 1 m)
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x "S" set for boats
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Wing OXY 5,0 m2
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Crystal TX 35.150 Ch 75
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
2 x Short ball link M2 (6 uds)
2 x ABS tube 3.0x1.0x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Ball link M1.6 (6 uds)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x SE Ring 300 mm (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Spinner 82mm Black ventilado
1 x Cono NUT 5/16"x 24 -M4
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x 20x200 mm battery rings
2 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Tape GFK 25 mm
1 x SE Ring 450 mm (2 pcs)
1 x Motor OS 3820-1200 electric
1 x Ball link M3 RPA's-UAV's
1 x Marker ties (20 pcs)
2 x Foil for sticking flaps and ailerons
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Socket head long ball link M3 (2 uds)
1 x SE Ring 250 mm (2 pcs)
1 x Ball link M3 (6 uds)
1 x ABS tube 16.0x14.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Conector MR-60 (pareja)
1 x ABS Strip 1.5x6.0x1000 mm
1 x DPSI magnetic switch actuator (PCB)
1 x Round Rod 4,0x1000 mm
1 x 20-25mm Servo Arm
1 x GPS Sensor + Logger OPTronics
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Prop Holder AXI 41xx V2
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x 6 mm Quick clamp_S (10 pcs)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Mini-Pix Esc 15 Amp
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x PropCover 16-20" (2 pcs)
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Hot Glue Stick GREEN
1 x Xplorer3 anemometro
1 x Propeller 3x2
12,935.56EUR
Manufacturers
Manufacturer Info
KontroniK
- KontroniK Homepage
- Other products
Notifications
NotificationsNotify me of updates to Mini-Pix Esc 15 Amp
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce