Top » Catalog » Outlet Zone » Controlers » KON4002

50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]

This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.

few units

Reviews

Customers who bought this product also purchased

Propeller Pleg CAM Carbon 6x3

few units

AXI2203/40 VPP

few units

Quick Find

Shopping Cart

3 x	Beech dowels 4.0 x 1000 mm
2 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 10x100x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Extinguisher CO2 - 2 Kg
2 x	Round Rod 3,0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
3 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
2 x	Strip 3,5x1,75x330 mm
1 x	Strip 2,5x1,25x330 mm
2 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 9.0x7.0x1000 mm
2 x	ABS tube 3.0x2.0x1000 mm
2 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 12.0x10.0x1000 mm
2 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	ABS tube 7.0x6.0x1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Glases Flitemaster
2 x	Pine wood slat 10x10x1000 mm
2 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	Glases Aspen
1 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Glases Ace
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
3 x	BALSA trip 2.0x10.0x1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Glases Nimbus "Black"
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Glases Innovation Plus
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Glases Stratus
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Wing OXY 5,0 m2
2 x	Beech dowels 3.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
2 x	Round Rod 1,25x1000 mm
1 x	Strip 1,5x1,5x330 mm
2 x	Round Rod 2,5x1000 mm
2 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x4.0x1000 mm
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Charger LiPo Charger4
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	T-shape holder metal LAMA
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon blade 3D 230 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
2 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
2 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon blade 230 mm
2 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Cooler motor type 280
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
2 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Cooler motor type 300
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Flybar support metal LAMA
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Styrene plate 320x120x1.0 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Styrene plate 320x120x0.5 mm
1 x	Glass fibre sleeve Ø 20 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Release film 100 cm x 50 m
2 x	PVC grid straight 290x185x0.32 mm
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	Regulador Jeti Jes 045
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	A/C quality beech plywood 1520x750x4.0 mm
2 x	BALSA trip 3.0x5.0x1000 mm
2 x	Birch plywood plate 600x300x3.0 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Interface Jack Adapter IKARUS
1 x	Propeller MEJLIK 28x10
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Fiberglass plate 350x150x4.0 mm
1 x	XPower XC5030/14 LS

4,349.45EUR