1,744.00EUR

Motor DA 150
[TC5800]



Vista frontal del modelo

Cota del DA 150
First glimpse of the DA 150 is very satisfying due to it’s high quality finish. The cylinders, pistons and crankshaft are not from industrial sources but specially designed by Desert Aircraft and manufactured by specialist companies exclusively for DA.

The long conrod with the gudgeon pin mounted very near the piston crown allows the high torque output to be transferred with the minimum of piston side thrust, thereby reducing drag and wear.

The totally normal DA 150 has a higher output than the Special Edition 160cc engine from another manufacturer.

With the first place in 1999 World Aerobatic Masters as well as the TOC 2000, the DA 150 has proved it’s superiority in choice as a power unit for large aerobatic models.

To show what pilots using DA engines can achieve is the end results in the last TOC, 1st and 2nd place went to DA engines. 15 from the 21 entrants used DA engines, 14 from these used the DA 150. Champion was Chip Hyde with the DA 200, this engine is only in the development stage at the present time.

Steve Holland deservedly won the best of show award at the 2003 la Ferté-Alais, with such a realistic and elegant flight performance I have never seen before. The DA 150 pulls the 30 kilo, half-scale Zlin 526 effortlessly through all manouvers.

The piston, conrod and crankshaft has been designed with a computer simulation programme. These parts are perfectly balanced and harmonized to each other. The DA 150 has the lowest vibration levels possible over the entire throttle range.

The most prominent feature, as is the case with the DA 100, is the very long crankcase. The third bearing sits right behind the propellor hub. The very long and stiff crankshaft housing makes installation easy.

Every single crankcase is CNC milled from the solid in high tensile aircraft aluminium 7075-T6. In comparison to die casting a vastly more expensive process in time and materials. The CNC method has the very distinct advantage over die casting in that tolerances are very much closer and ensures a perfect alignment of the crankshaft as well as an overall greater stiffness and strength. All requirements for a high performance long life engine. You must agree upon seeing the DA 150 that it looks so good, it is a pity to cover it up with a cowl.

The reliable Desert Aircraft battery ignition unit has of course automatic advance and retard that makes starting so very easy and ensures maximum power. This unit is completely screened.

Features:
- Computer Simulation designed high performance engine with very high torque output.
- Crankcase CNC milled from high tensile aircraft aluminium.
- The cylinder, piston and crankshaft is developed by Desert Aircraft.
- Long conrod with gudgeon pin set very near piston crown for reduced side load.
- Unusually low vibration due to computer simulation aided design.
- 4 Leaf flutter valves.
- Battery ignition with automatic advance and retard.
- Rapid spares delivery and repairs service from Germany by Toni Clark practical scale GmbH.
- 5 years Guarantee!


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Vest clothes Hispano Aviación
1 x Softshell Hispano Aviación
1 x Ballast 700gr OPALE
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x Silencer with rear exhaust DA-120
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x SE Ring 200 mm (2 pcs)
1 x Cabel "Y" 30 cm (Futaba)
1 x Canister combo DLE 120 cc
1 x Spinner 82mm Black ventilado
1 x Micro flex hinge (12 uds)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Cable S.BUS 3 salidas 100 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Stainless Steel Silencer side outlet for ZG 20/23/26
1 x 2,0x50 mm allen screwdriver
2 x Adjustable brass horn threaded M3
1 x Receiver Crystal 35 Mc/s Ch 62
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x Propeller G-Sonic 20x8
1 x Digital precision scale up to 2000 g
1 x Ignition for ZG 20/26
1 x Carburettor Intake Bend for ZG38
1 x Distanzstück motor OS 120 AX
1 x 42 mm black plastic spinner for fixed propeller
1 x Carburetor DLE 30
1 x Cylynder DLE 20-RA
1 x M3-M4 rubber washer (8 pcs)
1 x Ball Link Plier
2 x Flap hinge (6 pcs)
1 x Receiver replacement antenna, approx. 15
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x DLE 111 Carb gasket (V1)
2 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x 55% silver electrodes (2 pcs)
1 x Motor DA 150
2 x ABS "T" angle 10.0x10.0x1000 mm
2 x Motor DA 85
1 x Dremel 3000 130W
2 x 25 mm Sandpaper file
1 x DLE 85/111/120 Crankshaft keyway
1 x Canister combo DLE 120 cc
1 x Medidor ángulos y/o incidencias
1 x Horn DUBRO 1/2A
1 x Motor UMS Radial-5-150cc gas
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Rear cover O-ring 26/30 cc
2 x Horn mando small (2 pcs)
1 x 80 mm rods set for direction control
2 x Brass control horn M4 short for wire (4 pcs)
1 x Horn 20x28,5 mm (2 pcs)
2 x Brass control horn M2 short for wire (2 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Spinner NUT M5
1 x 140 mm rods set for direction control
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Spinner NUT M5
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable coupler M2 (10 uds)
1 x Surface Indicator Gauge Small
1 x Piston ring EME 35cc
1 x Propeller pad and output shaft EME 55/60 cc
1 x Compact Silencer KOLM BX-155
1 x EME ignition free wheel
1 x One Way bearing for EME55 starkit with key
1 x VBar NEO VLink 6.x Express, neon-yellow
1 x Piñon motor autostarter 35cc
1 x Pitts Mufflers EME 35 cc
1 x VBar Control Touch, midnight black
1 x 115x29 mm (4.50") Type jets aluminium core wheel
1 x 1/10 Pilot "Jack"
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x ALPHA 1000mm BL ARTR
1 x TX 250 mW especial GOPRO
1 x TMM 2512-3S heli
2 x F9F COUGAR Grey ARF 1.562 mm
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Electric Landing Gear ASPIRE
1 x Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x Propeller POWER-PROP 7x7
1 x Bags de Luxe ASPIRE
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x 200 mm extensión servo HITEC/JR
1 x 20x200 mm battery rings
1 x 280 cc gasoline fuel tank complet
1 x 
1 x Cilinder joint for G230RC/G260RC
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Profile ABS Square 1 x 1000 mm
1 x Savox Brushless Servo SC-1251 MG
1 x Servo SAVOX SH 0257 MG
1 x Bearing block for noseleg landing gear
1 x ABS angle 5,0x5,0x1000 mm
2 x U Profile ABS 2,0x4,0x1000 mm
2 x Profile ABS Square 4 x 1000 mm
2 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x ALU servo arm 3 mm shaft
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Savox Brushless Servo SC-1267 SG
1 x U Profile ABS 1,0x2,0x1000 mm
1 x SAVOX SH 0255 MG servo
1 x Propeller CFK 17x18
1 x Servo RHINO pro SHV digi 4
1 x Propeller RF CFK 16x8,5 S
1 x Propeller CFK 23x12
1 x Propeller CFK 15x13
1 x Propeller CFK 12.5x7
1 x Propeller CFK 16x13
1 x Propeller CFK 14x8
1 x EC-Cutter
1 x Tachometer Hyperion Multi-pala
1 x Brass control horn M4 long for wire (4 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Horn F3A de Titanium 16 mm (2 units)
1 x MVVS exhaust gasket 26cc
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 6 mm aluminium horn with patella
1 x Turbina KINGTECH K70G4
1 x Fixing Ring with Base 40 mm
1 x Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D
1 x Stainless Steel Bend D 20x0,6mm
1 x Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R
1 x Gyro 3-Ejes REFLEX V2 FMS
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole
1 x Servo AN-20 MGBBA
1 x SAVOX SH 1250 MG servo digi
1 x Profile ABS half cane 4x1000 mm
1 x Rubber profile 6-2 mm 2M
1 x 28 mm tailwheel unit
1 x Foreman, scale 1:32
2 x Profile ABS half cane 3x1000 mm
1 x Servo SAVOX SV-1270 TG
1 x Flap hinge 33x9 mm (6 pcs)
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
2 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x SAVOX SH 1290 MG servo digi
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Servoarm SH-81, two sides, aluminium
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ALU double servo arm 3 mm shaft
2 x Profile ABS Square 3 x 1000 mm
2 x Profile ABS Square 2 x 1000 mm
1 x Decorative caps, multicoloured, short
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Servo SAVOX SV-1260 MG
2 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 7.0x1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x ALU servo arm 90º 3 mm shaft
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Servo SAVOX SA-1256 TG
1 x Profile ABS half cane 8.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
2 x L-Connector 4.0 mm x 1000 mm
1 x Charger LiPo Charger4
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x ABS angle 6,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Servo SAVOX SB-2290 SG
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Rubber profile 10-2 mm 2M
1 x Flat Connector 4.0 mm x 1000 mm
1 x Servo SAVOX SV-1273 TG
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x SAVOX SH 0254 servo
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Servo mounting frame SV-1260MG
1 x Savox Brushless Servo SB-2271SG
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Propeller RF CFK 14.5x14
1 x Propeller RF CFK 13x7
1 x Propeller CFK 16x16 Wide
1 x Propeller CFK 15x7
1 x Propeller CFK 14x7
25,587.99EUR
Manufacturers
Manufacturer Info
DA
DA Homepage
Other products
Languages
Español English
Currencies