1,298.00EUR

Motor DA 100L
[TC5700]



Vista frontal del modelo

Cota del DA 100
The DA 100L is a computer designed high performance model aircraft engine. The finish of the machining makes a very strong impression of the overall quality. All components have been designed by Desert Aircraft without compromise, are machined by specialist firms exclusively for this engine.

The long conrod, plus the gudgeon pin being mounted close to the piston crown allows the high torque to be transferred without undue sidethrust. This reduces wear and piston drag thereby increasing the performance, so much so the DA 100L has the power of many other 120 cc engines.

The piston, conrod and crankshaft has been designed with a computer simulation programme. These parts are perfectly balanced and harmonized to each other. The DA 100L gives the lowest vibration levels in it´s class over the entire throttle range.

A prominent feature is the very long front crankcase. The third bearing is placed well forward directly behind the propellor hub. The very stiff and long crankshaft housing makes for ease of installing the engine under the cowl.

Each single crankcase is machined out of the full from the high tensile aircraft alloy 7075-T6. Compared to die casting, a very expensive method in time and material. This all has the great advantage of a high standard of precision and perfectly aligned crankshaft bearings as well as a superior strength and stiffness; all requirements of a high performance engine with a very long life. Last thing, the optical effect of the perfectly machined surfaces on the DA 100L makes one reluctant to hide all under the cowl.

The reliable Desert Aircraft battery ignition unit has of course automatic advance and retard that makes starting so very easy and ensures maximum power. This unit is completely screened.

Features:
- Computer simulation designed high performance engine with very high torque output. - 180 g less weight and 100 RPM more than the DA 100 on the same prop. - New and smaller crankcase, CNC machined from high tensile aircraft alloy aluminium. - Cylinder piston and crankshaft developed by Desert Aircraft. - Long conrod with gudgeon pin located very near to piston crown to reduce side thrust. - Unbelievably smooth running due to computer simulation development. - New design 4 leaf flutter valves. - Battery ignition with automatic advance and retard. - Rapid spares delivery and repair service from Germany by - Toni Clark practical scale GmbH. - 5 Years Guarantee! Guarantee conditions


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x Extension silicon 10 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 30 cm male (Graupner)
1 x Extension 100 cm (Futaba)
1 x Extension silicon 30 cm female (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 30 cm female (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 75 cm (Futaba)
2 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 50 cm (Futaba)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 50 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Futaba male 40 cm extension
1 x Extension silicon 100 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension silicon 30 cm male (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x Futaba Female 40 cm extension
1 x Extension silicon 25 cm (Futaba)
1 x Extension silicon 75 cm (Graupner)
1 x Dean "T" - Futaba Adapter
1 x USB HLS prog. interface
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CC 01
2 x Copper lacquer wire Ø0,2 mm (5 m)
2 x CC 02
1 x Cabel charger transmitter GRAUPNER
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm BEC cable (male)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x TrainerCord (master-learner)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
2 x CC 05
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x APM2.6 Power module with 5.3V DC BEC
1 x Adapter lead MPX/XT60
3 x 30 cm BEC cable (female)
2 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x MPX-Dean "T" Adapter
1 x BEC 3A FOXY
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 4 LiPo XH>EH adapter
2 x 2 LiPo XH>EH adapter
1 x JETImodel SINGLE BEC
1 x TP/TopFuel - XH 2/3S Adapter
2 x Dust collector for mould cleaning
1 x Digital scale up to 40 kg
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Vacuum pump P1-N
2 x Starter Sullivan-STAR 601
1 x Digital precision scale up to 2000 g
2 x Hot Glue Stick GREEN
1 x Screwdriver for Torx® TX6
1 x Hot Glue Stick RED
1 x Starter Sullivan-STAR 603 DINATRON
1 x Starter 12v (Max 90 and 15ccm)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Ball Link Plier
2 x Screwdriver for Torx® TX8
1 x Copier 5x20 cm pcs
2 x Starter 12v (Max 180 and 30ccm)
1 x Hexagonal ball head 2.0 x 50 mm
1 x Screwdriver for Hexagon 1,5mm
2 x Tape GFK 38 mm
2 x SE Ring 250 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 330 mm (4 pcs)
1 x Ring 320 mm length (5 pcs)
2 x 20x200 mm battery rings
2 x SE Ring 240 mm (2 pcs)
1 x Foil for sticking flaps and ailerons
3 x SE Ring 300 mm (2 pcs)
2 x SE Ring 450 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x Cinta Goldfix 1m
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Spikes Band (5 m)
3 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x ABS tube 2.0x1.0x1000 mm
1 x Cable with accesories
1 x Ventral support for AX-18/AX-60
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Plasti Dip Liquid Tape 429 ml black
1 x Kwik link AL M3 con Clip (2 pcs)
2 x Field folding model stand SebArt
1 x CC 03
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x PWC4 wing/fuselage connector for 4 servos
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x SPARK Switch 12v
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Pump hose (Ø 6/8 mm) transparent
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Sealing Iron Profi LCD
1 x Roller cutter 28 mm
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Steel brush wheel with 2.35mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 
1 x SE Ring HACKER 300 mm (2 pcs)
2 x Tape GFK 50 mm
2 x Tape GFK 25 mm
1 x Cut tube
1 x Hot Glue Stick BLACK
1 x Precision wrench L100 mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Llave dinamomterica 74 Z 0 0 21
1 x Propeller drill jig DA-35/50/60/70
1 x 1,5x50 mm allen screwdriver
1 x Heli digital angle measurer
1 x Starter EM Gear Power 80
1 x Motor OS 3820-1200 electric
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Nut for mounting M4 (4 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x SE Ring 350 mm (2 pcs)
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Blind nut M5 (4 pcs)
1 x Tail boom brace LOGO 480
1 x Blind nut M8 (10 pcs)
1 x Blind nut M6 (4 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Nut for mounting M3 (10 pcs)
1 x Blind nut M3 (4 pcs)
1 x Blind nut M5 (10 pcs)
1 x Blind nut M4 (4 pcs)
1 x Nut for mounting M3 (4 pcs)
1 x Truck-trailer for gliders 720 x 285 mm
1 x WingFix ULTRA Black Edition
1 x Lock nut M5 (20 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Marker ties (20 pcs)
1 x Circlick securite
1 x Profile ABS half cane 3x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Exhaust pipe BX 155 Left
1 x O-Ring SAITO FG-90 R3
1 x Ball Bearing Oil 25 ml
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x Light semi-synthetic Oil PUTOLINE TT (1l)
1 x Motor Saito FG-14, 13,47 cc
1 x Carbon plate 350x150x1.0 mm
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Castrol Oil TTS 1l
1 x PVC transparent black termo-retract battery 185 mm (1 m)
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Castrol Oil A747 1l
1 x Motor Saito FG-100 TS, 100 cc
1 x 6,4x1000 mm 2:1 blue termoretract tube
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Motor SAITO FG-61 TS
1 x PVC transparent battery termo-retract 85 mm (1 m)
1 x Valvoline SynPower 2T, 1 Litre
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x DA-50R motor alumine support
1 x Canister combo DLE 120 cc
1 x 25 mm gas motor standoff
1 x ESC 40A. Opto starter Kolm
7,723.77EUR
Manufacturers
Manufacturer Info
DA
DA Homepage
Other products
Languages
Español English
Currencies