3 x | Gates hinge black 30x16 mm (2 pcs) |
3 x | Indoor hinge with servo arm integraded |
4 x | Medium pin type hinge (12 uds) |
5 x | SUPER DIMONA TC-80 |
2 x | Catalog AERO-NAUT 2016 |
5 x | Swing 1000 |
1 x | Small flex hinge (12 uds) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
3 x | Small pinned hinge (12 uds) |
4 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Hobbylite Filler, Balsa colour |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | Partall paste 650 g |
3 x | Universal Colour Paste white 50 g |
2 x | 500 ml sealer (DOPE) |
2 x | Painting GHT Lexan Black 150 ml |
2 x | Solvent Plasti Dip 1000 ml |
4 x | Black silicone 1,0 qmm wire (50 m) |
5 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
4 x | Protective Cover for wires Ø 6 mm 1000 mm |
5 x | Opale Rucksack |
3 x | Protective Cover for wires Ø 20 mm 1000 mm |
12 x | Parachute P4 |
10 x | Aramid 50 daN 50 m |
3 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
7 x | Parachute PV6 for F3J |
6 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
18 x | Trike XL motor set (motor+esc+prop) |
4 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
2 x | Cable set PREMIUM , fuselage/wing one4one |
3 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
3 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
3 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
7 x | PVC 0,14 qmm servos wire Graupner (100 m) |
13 x | Parachute BACKUP X100 |
13 x | Para-RC Trike "RC-Bullix" |
5 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
3 x | Black silicone 0,25 mm² wire (25 m) |
4 x | Protective Cover for wires Ø 10 mm 1000 mm |
5 x | Green silicone 0,25 qmm wire (50 m) |
5 x | PVC 0,08 qmm Graupner servos wire (5 m) |
14 x | Paramotor BackPack XXS 2 |
11 x | MAX pilot ARTF |
2 x | PVC 0,14 qmm servo wire Futaba (5 m) |
5 x | JR silicone servo wire 0,35 qmm / 5m |
5 x | Green silicone 0,25 mm² wire (25 m) |
5 x | 10 mm Quick clamp_L (6 pcs) |
7 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
13 x | Set cintas unión paracaídas 145 cm |
11 x | Wing OXY 5,0 m2 |
4 x | 6 mm Quick clamp_S (10 pcs) |
13 x | Paramotor Trike XL |
12 x | Paramotor BackPack XXS (without accessories) |
3 x | Silicon black 2,5 qmm cable ( 25 m) |
4 x | 1 m servo "Premium" wire (white/red/blue) |
3 x | Red silicone 1,0 qmm wire (50 m) |
10 x | Para-RC Mix |
10 x | Windsock Ozone L -1200 mm |
10 x | Rescue 1,8m2 / BackPack |
2 x | Blue silicone 0,5 qmm wire (50 m) |
4 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
5 x | Protective Cover for wires Ø 3 mm 1000 mm |
5 x | PVC 0,08 qmm Futaba servos wire (5 m) |
4 x | Cable set PREMIUM, fuselage/wing |
14 x | Wing OXY 0,5 pulgadas2 |
4 x | Protective Cover for wires Ø 15 mm 1000 mm |
4 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
14 x | Windsock Ozone L - 700 mm |
3 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
2 x | Cable Cargador FUTABA |
9 x | LUCAS pilot ARTF |
4 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
5 x | 5 line servos wire black (1 m) |
11 x | Para-RC "RC-Evo-Cross" Rescue |
3 x | Silicon red 1,0 qmm cable ( 25 m) |
2 x | Protective Cover for wires Ø 6 mm 1000 mm |
11 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
5 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | Micro control horn T2 Ø 1 |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Flat washer 2.2 mm (20 pcs) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Remote electric ignition system |
3 x | Silicone red 2,5 qmm wire ( 25 m) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
4 x | Spring lock washer 4.1 mm (20 pcs) |
3 x | Buy Perforated film 100 cm / 20 m |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
7 x | Me-163 |
3 x | Oracover Azul 2 m |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Angled clevis with threaded rod M3 |
2 x | Long ball link M3 (6 uds) |
3 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | Glases Ace |
1 x | Silicone black 1,5 qmm wire ( 1 m) |
3 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
5 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
3 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
3 x | ORACOVER Ferrari red (2 m) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | White smoke bombs AX-18 (5 pcs) |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
2 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell |
3 x | Silicone black 4,0 qmm wire ( 1 m) |
3 x | Silicone red 1,5 qmm wire ( 1 m) |
2 x | Medidor ángulos y/o incidencias |
2 x | Smoke set "Glider" |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | ABS tube 6.0x4.0x1000 mm |
4 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Silicone black 0,5 qmm wire ( 25 m) |
2 x | SIMtransmitter 6 Mode 2 |
1 x | Propeller balancer |
1 x | Straightened threaded rod M3 - 1m |
2 x | Spring lock washer 3.1 mm (20 pcs) |
3 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | "S" set for planes |
5 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Ball link M2 (10 pcs) |
2 x | Ball link M3 (6 uds) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | Glases Moritz |
1 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Field folding model stand SebArt |
3 x | Silicone black 0,5 qmm wire ( 1 m) |
3 x | Control horn long w/ball |
2 x | ABS tube 5.0x4.0x1000 mm |
2 x | Silicone black 0,75 qmm wire ( 25 m) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
2 x | Silicone black 2,5 qmm wire ( 1 m) |
3 x | ORACOVER Fluor red (2 m) |
2 x | Landing gear axle 4x21 4 mm (2 uds) |
3 x | Oracover CARBON Metalic 1 m |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
5 x | Ply-Span 450x600/13g Yellow |
1 x | Extension silicon 35 cm (Futaba) |
2 x | Silicone black 6,0 qmm wire (25 m) |
3 x | Silicone red 0,25 mm² wire (25 m) |
3 x | ABS 500 x 400 x 1,5 mm (white) |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
5 x | Silicone red 0,5 qmm wire ( 25 m) |
3 x | White smoke canister 140 g |
4 x | Ply-Span 450x600/13g Black |
4 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | Oratex Natural White 2m |
3 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
7 x | Ply-Span 450x600/13g White |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
2 x | Monokote BLANCO jet (1.8x0.65m) |
3 x | Silicone red 4,0 qmm wire ( 1 m) |
4 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | 22m Fitting barb |
2 x | Parachute expulsion foam |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
3 x | 1/12 Pilot "Cougar" |
3 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Socket head ball link M3 (2 uds) |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | DLE Ignition 111/120/170 |
3 x | Green smoke canister 65 g |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
3 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | 1/12 Pilot "Langley" |
1 x | Angle of incidence meter |
1 x | Kwik link AL M4 con Clip (2 pcs) |
4 x | Buy Perforated film 145 cm / 50 m |
2 x | Ply-Span 450x600/13g Blue |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Rudder forward 70x28 "type Kato" |
4 x | Ply-Span 450x600/13g Orange |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell |
3 x | 1/6 Pilot "John" |
3 x | B4-0 rocket charges (6 pcs) |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
3 x | Quicklock washer 2 mm (10 pcs) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
3 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | "S" set for boats |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Green smoke canister 100 g |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
3 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Long horn 50x26 |
3 x | Aluminium wide washer M3 red (4 pcs) |
2 x | Initior Receiver FRX2 Wireless |
2 x | Quicklock washer 4 mm (10 pcs) |
2 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
1 x | Extension silicon 50 cm (Graupner) |
2 x | Silicone red 6,0 qmm wire (25 m) |
3 x | 5 mm M2 variable inclined horn |
1 x | Long ball link M1.6 (6 uds) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Ball link M3 (10 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | 6 mm ball link M3 (10 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
3 x | AL Axle Shaft 4.0x16 mm (2 uds) |
2 x | Ball link M2,5 (10 pcs) |
3 x | Socket head long ball link M3 (6 uds) |
4 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Red smoke canister 140 g |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | AX-60 starters (5 pcs) |
3 x | 1/10 Pilot "Jack" |
2 x | Silicone red 4,0 qmm wire (25 m) |
3 x | Joint with bearing M3 22x5,5 |
4 x | PVC transparent battery termo-retract 195 mm (1 m) |
2 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
2 x | Adjustable brass horn threaded M3 |
3 x | Couple M4 for wire (10 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Brass control horn M2 long for wire (10pcs) |
4 x | Oracover Orange 2 m |
2 x | Smoke set "S" |
3 x | Fiberglass plate 350x150x1.5 mm |
2 x | Frontal Adapter for AXI53xx |
1 x | Oracover Green10 m |
5 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Servo HITEC HS-45 HB |
3 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
2 x | M3 black washers (4 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
6 x | 30 cm BEC cable (female) |
2 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
3 x | 20 mm carbon horn |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
3 x | 120x60 mm SLH KOVO wheel |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
4 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
3 x | TX 250 mW especial GOPRO |
2 x | PVC grid straight 290x185x0.32 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
3 x | MYLAR film A350 (1000x500 mm) |
1 x | Gear set HITEC HS-125MG/5125MG |
1 x | Fiberglass plate 1200x1000x0,2 mm |
2 x | Parachutist |
3 x | Extra long horn 60x30 |
1 x | 280 cc gasoline fuel tank complet |
3 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | 6 mm M3 variable horn |
2 x | Turnbuckle M1,6x20/30 (2pcs) |
2 x | Horn with ball 55x40 |
2 x | Cabel "Y" 30 cm (graupner) |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Marker ties (20 pcs) |
2 x | Beech dowels 4.0 x 1000 mm |
2 x | Fiberglass plate 350x150x1.0 mm |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Nose wheel 62 mm |
3 x | Crystal Universal RX 35.170 Ch 77 |
5 x | Pilot "Duke" Legends Series (Slimline) |
2 x | Horn 5/20 with M2 Bearing |
4 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | 800TVL CMOS camera for FPV |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
2 x | Crystal Universal RX 35.150 Ch 75 |
2 x | Ventus 1:4 set of instruments |
2 x | 3l Smoke oil |
1 x | Gear set HITEC HS-85 |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Screw M4x12 (10 pcs) |
4 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Crystal TX 35.180 Ch 78 |
3 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
3 x | 1/12 Pilot "Fighter" |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Oratex White 2m |
5 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
4 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Cooler motor type 300 |
4 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
2 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Foam plastic plates (310x210x3 mm) |
2 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | SlowFlyer control horn (3 pcs) |
1 x | PCARD Wireless System |
3 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
4 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Indoor Brushed motor kit |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Carbon plate 700x550x0.5 mm |
2 x | Carbon plate 350x150x0.5 mm |
1 x | Futaba male 40 cm extension |
4 x | PVC lilac battery termo-retract 70 mm (10 m) |
3 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | 90x60 mm standart servo cover |
5 x | Piloto Jet "Red" 1/6 Scale |
3 x | Cooler motor type 150 |
2 x | PVC grid diagonal 290x185x0.32 mm |
3 x | Long adjustable control horn with bearing |
1 x | Glases Stratus |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
3 x | Vasa model Catapult |
4 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Dean "T" - Futaba Adapter |
5 x | "Y" charging 4mm wire (2 IN-1 OUT). |
7 x | MPX-Dean "T" Adapter |
3 x | 30 cm BEC cable (male) |
6 x | Red copper lacquer wire Ø0,2 mm (5 m) |
3 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
9 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | 2 LiPo XH>EH adapter |
3 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
3 x | JETImodel SINGLE BEC |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | USB HLS prog. interface |
5 x | CC 01 |
6 x | 5 LiPo XH>EH adapter |
4 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
3 x | 4 LiPo XH>EH adapter |
4 x | 3 LiPo XH>EH adapter |
6 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | BEC 3A FOXY |
6 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
6 x | APM2.6 Power module with 5.3V DC BEC |
4 x | UBEC 6A KAVAN |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
4 x | Motor holder for AC 28/7 |
4 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Silicone black 4,0 qmm wire (25 m) |
1 x | 3-blades 28x12 carbon prop Super Silence |
3 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Horn 13,5x16 mm (2 pcs) |
4 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Switch Nutspanner for JETI Duplex Transmitter DC / DS |
2 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Extension silicon 30 cm male (Futaba) |
4 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Pulley brass 4/1,5 (2 pcs) |
2 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
4 x | TrainerCord (master-learner) |
6 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Cabel charger transmitter GRAUPNER |
2 x | SE Ring 200 mm (2 pcs) |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Screw M3x12 (10 pcs) |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
2 x | Cabel "Y" 30 cm (Futaba) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
3 x | Oracover Yellow CADMIO 2 m |
2 x | FESTO connector M7 Quick 4mm 90º |
2 x | Carbon plate 350x150x4.0 mm |
3 x | Civilian pilot "Pamela" size 9cm (Slimline) |
3 x | 1/10 Pilot "Jimmy" |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
2 x | 1000 ccm gasoline fuel tank |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
5 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
4 x | ABS 500 x 400 x 1 mm (white) |
7 x | Motor A2212/13T |
2 x | Fiberglass plate 350x150x3.0 mm |
3 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Servo HITEC D941 TW |
3 x | White large kwik link (10 pcs) |
4 x | Xplorer1 anemometro |
2 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
2 x | Horn mando long (2 pcs) |
3 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | Micro control horn (2 pcs) |
1 x | Servo TOPMODEL S7520 MG |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Servo FUTABA S 3071 HV S-Bus |
2 x | Spring pin Ø 1 x 6 mm (10 pcs) |
2 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Servo FUTABA BLS175 SV |
2 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
2 x | Glases Flitemaster |
3 x | Piloto Jet "Green" 1/6 Scale |
2 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Servo HITEC HS-485 HB |
2 x | Head upper part |
1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell |
2 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
4 x | 3,2 mm Prop Adapter M5 |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | Foam plastic plates (310x210x2 mm) |
1 x | Buy Perforated film 100 cm / 50 m |
3 x | Extra hard 250 ccm complete gasoline fuel tank |
2 x | Foam plastic plates (310x210x8 mm) |
2 x | Oracover Red 2 m |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
3 x | 1/12 Pilot "Tom" |
2 x | Threaded coupler M2 (10 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Servo HITEC HS-5585MH |
3 x | Small aluminium horn blue (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Servo HITEC HS-55 |
2 x | CC 02 |
2 x | PIX Hawk with accesories |
1 x | Servo TOPMODEL STANDARD S3217 |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Wheel FEMA 90 mm / 6 mm |
4 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Plastic caps for AIR BURTS (30 pcs) |
2 x | Extension silicon 10 cm (Graupner) |
4 x | FA27.2×8.9 Prop-2PCS/PAIR |
2 x | Brass control horn M2 large for wire (2pcs) |
3 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
2 x | Threaded insert M5 (10 pcs) |
2 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Spinner 80 mm GFK |
2 x | 500 ccm gasoline fuel tank |
1 x | wire tensioner (red) |
5 x | Red smoke canister 65 g |
1 x | 29x12 prop Super Silence |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
2 x | Pilot "Goose" (Slimline) |
2 x | Small kwik link (10 pcs) |
3 x | Spikes Band (5 m) |
2 x | Silicone red 1,5 qmm wire ( 25 m) |
2 x | Sheet Depron Aero 1250x800x3 mm |
2 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
2 x | DPS Switch JR/JR |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Spinner NUT M8x1,25 |
3 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | Horn 5/15 with M2 Bearing |
2 x | Adapter 5,0 mm M8 |
2 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
2 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | SAVOX SH 0254 servo |
1 x | FX three-position switched channel, long |
1 x | Air Trap Mounting - 175ml |
1 x | ODYSSEY Blue FANTASY ARF 2190 mm |
2 x | Oracover White 2 m |
1 x | Cinta Goldfix 1m |
2 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
2 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Spinner NUT M6 |
1 x | PWC4 wing/fuselage connector for 4 servos |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
2 x | PS-050 TONEGAWA Servo |
1 x | Propeller MASTER 6x4 |
1 x | 1/6 Pilot "Tony" |
1 x | Metal gear set for HS85MG/5085MG |
2 x | Balsa panel 2.0x100x1000 mm |
2 x | Styrene plate 320x120x0.5 mm |
1 x | Socket head ball link M3 (2 uds) |
1 x | Lock nut M6 (10 pcs) |
1 x | Bags wings/rudder ASPIRE |
2 x | 1/6 Pilot "Cindy" |
2 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
2 x | Spinner NUT M4 |
4 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
2 x | Carbon plate 350x150x1.0 mm |
2 x | Green smoke canister 140 g |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | Nut for mounting M3 (10 pcs) |
2 x | FESTO connector M7 Quick 6mm 90º |
3 x | BALSA triangular 15x15x1000 mm |
2 x | Regulador Jeti Jes 045 |
1 x | Long adjustable control horn 3x34 |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
3 x | DPS Switch Ampere |
5 x | TMM 2512-3S heli |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Metal clevis M2,5 (10 uds) |
4 x | Cooler motor type 400 |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | USB Charger 120-240V AC |
2 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
4 x | 1/4 Pilot "Heidi" |
2 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
3 x | Horn mando small (2 pcs) |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke |
3 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | Propeller MASTER 7x5 |
2 x | Short adjustable control horn 3x24 |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Hexagonal Nut M4 (10 pcs) |
3 x | USB Mini Camera endoscope |
2 x | Electric rocket starters (6 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Socket Head Screw M2x12 |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Turnbuckle M3 33x49 (2pcs) |
2 x | Female connector for 20 pines AWG |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Socket Head Screw M2x8 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | 150 Newtons FEMA absorber |
1 x | 28 mm tailwheel unit |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Blue smoke canister 140 g |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
2 x | Charger LiPo Charger4 |
2 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Bags wings/rudder ODYSSEY |
2 x | Oracover Brown 2 m |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Servo TOPMODEL DS1413 T |
2 x | Propeller POWER-PROP 15x8 |
3 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Servo HITEC HS-70 MG |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | wire tensioner (blue) |
1 x | Servo TOPMODEL DS9010 T |
2 x | Solarfilm Lite blue transp. 5m |
7 x | |
2 x | Spinner black 30 mm |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
2 x | Cable with accesories |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | SBEC 40 |
2 x | Ring 320 mm length (5 pcs) |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
4 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT |
2 x | CHALLENGER Indoor |
1 x | Male connector for 10 pines AWG |
2 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
2 x | Xplorer4 anemometro |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell |
2 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Short ball link M3 (6 uds) |
2 x | Crystal TX 35.010 Ch 61 |
1 x | 18m Fitting barb |
2 x | 1/7 Pilot "Japanese" |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
4 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
3 x | Flat washer 3.2 mm (20 pcs) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Screw M4x30 (10 pcs) |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | PSC 6 |
5 x | White silicone 0,25 mm² wire (25 m) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
2 x | Spinner NUT M6 |
1 x | Magnetic Connect locking system |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Extension silicon 30 cm female (Futaba) |
2 x | Horn 6/35 with M3 Bearing |
1 x | Servo HITEC D951 TW |
3 x | MAMBO 17 |
3 x | Socket Screw M2x3 mm (4 pcs) |
2 x | Transmitter Crystal 35 Mc/s Ch 62 |
3 x | Connector Sub-D 2+5 Female |
2 x | FunCup XL RR |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Turbofan 2000 NG, rotor |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
2 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Oracover White 10 m |
1 x | SPARK Switch 5.9v |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace) |
2 x | KONDOR 15-92 |
2 x | Baseplate servo |
2 x | Flat washer 1.7 mm (20 pcs) |
2 x | 1000 ccm complete gasoline fuel tank |
2 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Motor Set CHALLENGER Indoor |
2 x | Logo 400 SE VBar |
1 x | JETImodel Addcap 1640 |
3 x | SAVOX SH 0255 MG servo |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Set Micro-horns HS-60/81/85 |
4 x | Ply-Span 450x600/13g Red |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace) |
2 x | Metal ball clevis M3 (10 uds) |
2 x | Balsa panel 10x100x1000 mm |
3 x | 4 mm Prop Adapter M6 |
1 x | AXI 2808/20 V2 |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
2 x | CC 03 |
2 x | Electric Fuel pump |
2 x | Lock washer 2.2 mm (20 pcs) |
3 x | Rocket D3-P |
1 x | Woodruff key for DA50/85/100/150 and DA 200 |
3 x | Buy Perforated film 100 cm / 10 m |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Long Switch On/Off micro |
1 x | KIRA 600-20 6,7:1 |
1 x | Spinner 100 mm CFK |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | Silicone black 1,0 qmm wire ( 25 m) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
2 x | Angle measurer |
1 x | Cyano INSTA - CURE™ (12g) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | SBEC 30 D |
2 x | Adapter 3,0 mm M8 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Spinner 40 mm Black (Kavan) |
1 x | EWC6 40 cm wing connector |
1 x | Adapter 3,2 mm M8 |
1 x | SPARK Switch 12v |
2 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Oracover Yellow CADMIO 10 m |
1 x | Servo HITEC HS-65 MG |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | "Taxi Tank" Fuel Tank |
2 x | Joint with bearing M2,5 22x5,5 |
2 x | 58 mm micro servo cover |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | ExtraCA Top |
1 x | Film release agent PVA 25 ml |
1 x | PYRO 800-48 Long Axi |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Spinner 100 mm GFK |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | KIRA 480-34 5,2:1 |
2 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | ODYSSEY BLACK Eagle ARF 2190 mm |
2 x | 50x45 mm micro-mini servo cover |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | Flat washer 4.3 mm (20 pcs) |
6 x | White smoke canister 65 g |
1 x | Adapter SPEED 480 |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
2 x | MAX BEC 2D plus EX |
2 x | SE Ring 250 mm (2 pcs) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
3 x | Cable coupler M2,5 (2 pcs) |
1 x | Gearbox KPG25 4,2:1 |
1 x | Universal batery Tester |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Gear set HITEC HS-7950TH |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Horns indoor |
1 x | Metalic nose for PROJETI |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | KIRA 400-27 |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | USB Charger 12V DC for car |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
2 x | Pulley brass 14/2 (2 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
3 x | 12.7 mm 2:1 black termoretract tube |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Cable coupler M2 (10 uds) |
1 x | Servo HITEC HS-5085 MG Digi |
2 x | Cooler motor type 280 |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | SWTU2 switch |
3 x | Adapter 4,0 mm M8 |
4 x | Connector CAN 15 |
1 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
2 x | Field folding model stand |
1 x | Servo SAVOX SA-1258 TG |
2 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | Propeller MASTER 7x3 |
1 x | 70 mm aluminium spinner. |
2 x | Adapter 3,2 mm M6 |
1 x | AXI 2820/8 V2 Long |
1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
2 x | Horn with ball 40x30 |
1 x | Round Rod 1.0x3.5 cm |
1 x | Wheel 18 mm |
2 x | Xplorer2 anemometro |
2 x | Cable control set |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Fiberglass plate 620x540x0,2 mm |
2 x | 1/6 Pilot "Garry" |
2 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
3 x | Spray EC Red 400ml |
3 x | Spinner propeller pleg. 40 mm / 5,0 mm |
4 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
2 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | AXI 4120/14 V2 |
1 x | Motor Advance 50-6 |
1 x | Micro Switch button |
1 x | AXI 2814/16 V2 Long |
1 x | SPS 70V 100/200 A |
1 x | Propeller balancer |
3 x | White smoke canister 100 g |
1 x | Battery LiPo GENS 3700 mAh 6S 22.2v 60C (Gens Ace) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
5 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | 8 mm Adapter for AXI53xx |
1 x | KIRA 480-31 5,2:1 |
4 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Gearbox for VM motors (2,5:1) |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
2 x | DC-3 Douglas (White/Blue) 1800 mm |
2 x | Crystal TX 35.100 Ch 70 |
1 x | MPS Gas-Cap-Powerswitch |
2 x | Crystal TX 35.150 Ch 75 |
3 x | 2,3 mm Prop Adapter M5 |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
2 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | wire tensioner (black) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
3 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | ASPIRE Navy ARF 2.000 mm |
2 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Landing gear retract neumatic (Jet Legend) |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
2 x | SE Ring 350 mm (2 pcs) |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | Wire easy tensioner (red) |
1 x | MPX screwable clips (4 pcs) |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | USB interface ALTIS |
2 x | 3 mm Long Prop Adapter M5 |
2 x | Circlick securite |
2 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Fod Guard 94x34 mm |
1 x | Brake for 140 mm wheels |
1 x | YAK-23 "FLORA" (RBC Kits) |
2 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | 57 mm aluminium spinner. |
1 x | KIRA 500-36 6,7:1 |
2 x | PropCover 16-20" (2 pcs) |
1 x | 57 mm micro-mini servo cover |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | ALU double servo arm 3 mm shaft |
2 x | X-RAY Micro QR (Tail Tube) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
2 x | Tailormade cone A-10 Skymaster |
1 x | 45 mm aluminium spinner. |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Variable Flow Smoke Pump System |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | AXI 2820/10 V2 Long |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
3 x | Selfstart electronic switch |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | KIRA 480-34 |
2 x | JM electric Pump |
3 x | 15x7 tree blades propeller |
3 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
3 x | 2 mm Prop Adapter M5 |
1 x | Crystal Universal RX 35.030 Ch 63 |
2 x | Potenciometro micro |
2 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | KIRA 600-20 |
1 x | Socket Head Screw M2x5 |
2 x | 13 mm wing servo holder |
1 x | M3 Maxi ball link (2 uds) |
2 x | Tape GFK 38 mm |
1 x | Screw M3x8(10 pcs) |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | 55 mm aluminium spinner (Kavan) |
2 x | Brass control horn M2 short for wire (2 pcs) |
2 x | 550 cc gasoline fuel tank complet |
1 x | Futaba BLS152 - Upper Case |
1 x | EWC3 100 cm wing connector |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Adapter SPEED 500/600 |
2 x | Magnetic Interruptor MULTIPLEX |
2 x | Birch plywood plate 600x300x4.0 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | 2,3 mm Prop Adapter M6 |
1 x | Servo RHINO pro SHV digi 4 |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
2 x | Styrene plate 320x120x1.0 mm |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Spark Plug BRISK M14x1.25 |
2 x | Variable Flow Smoke Pump System |
3 x | Nose OPTIMA 2.200 mm (Elec or Glider) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Blind nut M6 (4 pcs) |
2 x | ORACOVER transparent Yellow (10 m) |
2 x | F1 Prop Cap Can (Fuel Container Conection) |
2 x | DC-3 Douglas (DAKOTA) 1800 mm |
1 x | 6x4 tree blades propeller |
1 x | Bags de Luxe ODYSSEY |
1 x | MAX BEC |
1 x | Spinner NUT M5 |
2 x | Plastic wheels 28 mm (2 pcs) |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | 18 mm wing servo holder |
1 x | EWC3 40 cm wing connector |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | Servo HITEC HS-85 BB |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
3 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | Long adjustable aluminium control horn 2,8x24 |
3 x | Cabling for Fox MDM1 wings |
2 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | SunCover 110/120/140 Class (SebART) |
1 x | Adapter SPEED 480 whit axle short |
1 x | OPUS-V / Jet-CC-BF |
1 x | PYRO 750-50L |
3 x | 10 mm dogdrive props |
1 x | Fuel Dot (RED) |
2 x | Oracover Black 2 m |
1 x | Nut for mounting M5 (4 pcs) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | HERON RR |
2 x | Electric Fuel Pump 12V |
2 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
3 x | Pilot JAN 1/4 Saiplanes |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | resin-hardener package L-385 with hardener H-385 |
2 x | Yellow smoke canister 140 g |
2 x | 20x200 mm battery rings |
2 x | Crystal Universal RX 35.070 Ch 67 |
1 x | Spinner 50 mm White (Kavan) |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Blind nut M5 (4 pcs) |
1 x | Battery LiPo GENS 4000 mAh 3S 11,1v 25C (Gens Ace) |
1 x | diameter silicone tube for glow |
1 x | Fuel Dot (Silver) |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | PYRO 600-12 |
2 x | M3 Maxi ball link (2 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Compact on-board starting system (9724) |
1 x | |
1 x | Servo FUTABA BLS172 SV |
1 x | Servo DITEX EL0510M |
1 x | 1/4 Pilot "Mike" |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Turnbuckle M2x29/43 (2pcs) |
2 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
2 x | Spinner propeller pleg. 30mm axle 3,0 mm |
1 x | LA500 rotor head core |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
2 x | SE Ring 450 mm (2 pcs) |
1 x | ZENOAH ZG 80B |
3 x | Lock washer 4.3 mm (20 pcs) |
3 x | X-RAY Micro QR |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
3 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | A/C quality beech plywood 600x300x0.8 mm |
4 x | MVVS presuritation conection 26-175 cc |
2 x | Compact on-board starting system (9715) |
3 x | Aluminium sheet 500x250x0,5mm |
4 x | TMM 1210-3S heli |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Spinner red 30 mm |
1 x | Gear set HITEC HS-81 |
1 x | Superlight deluxe wheel 50 mm (2 pcs) |
1 x | Lock nut M5 (20 pcs) |
2 x | FESTO connector M7 Quick 4 mm |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | Spare white 30-36 mm spinner |
1 x | Giant Scale Muffler D.A. 70 |
2 x | EASYGLIDER 4 RR |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
2 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | PYRO 700-45 Long Axi |
1 x | Vess propeller 12x7 S |
2 x | COPILOT Multiplex |
1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
2 x | Allen wheel collar M3x3 |
1 x | Futaba Female 40 cm extension |
1 x | Fod Guard 94x32 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Spinner white 40 mm |
1 x | Red smoke canister 100 g |
1 x | Electric Landing Gear F9F COUGAR |
1 x | Jet Pipe 160N-250N (120/130 mm) |
2 x | 76 mm light wheels (2 pcs) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pulley brass 8/2 (2 pcs) |
3 x | Yellow smoke canister 65 g |
1 x | PowerFuel RX V2 Fuel Pump |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
3 x | 5 mm Prop Adapter M8 |
1 x | Servoarm Aluminium SH-82 |
1 x | ZG231cc SHL |
3 x | Yellow silicone 0,5 qmm wire (50 m) |
2 x | Pipa 3D BULL MØ1 2.600mm |
2 x | 1/6 Pilot "Buddy" |
2 x | X-RAY Micro QR (Elevator) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Wheel FEMA 82 mm / 5 mm |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | HITEC DPC-11 programmer |
2 x | Balsa panel 1.0x100x1000 mm |
2 x | Compact on-board starting system (9713) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Actrocon 30A ESC |
1 x | Actrocon 60A ESC |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | RC Power Switch 5A |
1 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | Anntena Panel 5,8 GHz - 14 dBi |
3 x | BULLIT Wing 840 mm |
2 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
2 x | Propeller diller for DLE111 and DA85-150 |
2 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
2 x | Switch Cap M (blue) |
1 x | DLE 30 complete electronic ignition |
2 x | switch long 3-position DS Tx DUPLEX 2,4EX |
1 x | Landing gear Rocket 400 |
2 x | Propeller set 400 (2R+2L) |
1 x | Castrol Oil TTS 1l |
1 x | Fournier RF-4D |
1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Propeller POWER-PROP 9x6 |
1 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | GPS Altis |
1 x | Stainless Steel S-Bend D25x0,5mm |
1 x | Receiver DUPLEX R4H EX 2.4 GHz |
1 x | Oracover Verde 2 m |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Receiver FUTABA R7014SB FASST Test |
1 x | Glases Nimbus "Black" |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
5 x | Motor DLE 200cc Std |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
2 x | Blades 330mm |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Ion Pro, Wing joiner (JP Model) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | MB339 Mini 1.45m Frecce TRICOLORI ARF +elec.L.Gear + 3 Microser |
1 x | Escape Moki 100 BVT |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
2 x | FESTO connector M5 Quick 6 mm |
2 x | PT 20x13 EL Propeller |
2 x | 3 mm Leader (L 100 mm) |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
3 x | Astra (Top Model) |
1 x | TS832 to Gopro AV/Power Cable |
2 x | Propeller 8x4,3 SlowFlyer |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Propeller APC 11x4.7 SF |
2 x | Futaba Aero Large Case - Internal Foam |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Long ball link M2 (6 uds) |
2 x | Block 1Rolle 5x7x3 mm (5 pcs) |
1 x | Xoar Electric Beechwood Prop 15x8 |
2 x | Silent-blocks DLE 170M |
2 x | Sensor telemetry FUTABA SBS-01C |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | 2,5x60 mm allen screwdriver |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Universal Filter |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | Crankcase gasket DA-100 |
1 x | ENIGMA ARF |
1 x | Motor Moki S 300 cc 5 cylinders |
3 x | Propeller RABOESCH.Ms 20mm/M3r 5-BL (rigth hydropropeller) |
1 x | Pendulun "Special" to tank 60g |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
3 x | Servo HITEC HS-53 |
1 x | Motor DA 170 |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Motor DLE 111 cc |
1 x | Hand Pads for Tray JETI |
1 x | CAM-Carbon Light Prop 10x4.5" (Prop right) |
2 x | Silencer with rear exhaust DA-120 |
1 x | Propeller APC 13x8 Electric |
2 x | 6 mm Prop Adapter M8 |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller electric carbon 10.5x6 |
1 x | Exhaust elbow for SAITO FA65/72/80/82a/91S/100/ |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Motor DLE 55 cc |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carburettor Intake Bend for ZG38 |
1 x | DJI Mavic Air Fly More Combo |
1 x | Propeller APC 11x8.5 Electric |
1 x | Spark motor OS nº 3 |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | ASW 20 5000 mm with winglets (Airwold) |
2 x | Antenna Hole Cap V1 (Silver) |
1 x | Pitts S1 - V2 1500 mm (Phoneix Model) |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
2 x | CNC FPV Display screen&Transmitter Holder Vertical |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
6 x | Small Crow DLE-170M |
1 x | 5 mm Prop Adapter CN-Spinner |
2 x | Gasket set DLE-55 |
5 x | Motor DLE 430 cc - Paramotors |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Motor EME 35 cc |
1 x | Propeller electric carbon 8.5x7 |
1 x | Fascination 3600 mm ARC |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | LO 100 ARC 3.3m |
1 x | Sparkplug 1/4-32 Glow |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | Spark plug cap DLE 55 / CM6 |
1 x | Propeller diller for DA50, DLE55 red |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
2 x | ABS Strip 1.5x8.0x1000 mm |
2 x | DLE Ignition 170M |
2 x | Cylinder EME 35 cc |
2 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
3 x | RX TARANIS V8FR-II HV 2.4 GHz |
3 x | Aluminium servo arm (2 uds) |
2 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
2 x | Blade Holder (3 blades) |
2 x | Cylinder Gasket set for DA-60 / DA-120 |
2 x | Q-12 2000 mm Electric |
3 x | Miss ULTIMATE 50E Yellow/Black |
2 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
2 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
2 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Round Rod 2,0x1000 mm |
3 x | Stainless Steel Bend D 20x0,6mm |
2 x | Sparkplug 1/4-32 EVO 10GX |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
3 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
2 x | Motor OS 3820-1200 electric |
1 x | Locking cable tie 4.6x203 (uds) |
2 x | "M" set |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | 300 Newtons FEMA absorber |
2 x | 20 g tin paste |
1 x | MIG 29 EDF |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
2 x | Anchor 50 mm (2 uds) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
2 x | Winter-Glove DS tx |
1 x | CC 05 |
1 x | Glases Nimbus |
1 x | MythoS 50E White/Blue |
1 x | Stainless Steel Bend D 25x0,5mm |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Gracia Maxi ARF (Top Model) |
2 x | T-shape holder metal LAMA |
1 x | ABS angle 5,0x5,0x1000 mm |
2 x | Needle bearing DLE55-RA |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | PBY 6/6A Catalina (aero-naut) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Futaba Radio Case |
1 x | ESC ALPHA 60A HV |
2 x | Piston ring for DLE-20 RA |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Gasket for motor DA 50-R |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Pitts Muffler for D.A. 100 |
2 x | ACTIVE ARF Electric 1.995 mm |
1 x | 8Wx2 Navigation & Strobe, 11mm Red/White |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | 1000 cc gasoline fuel tank complet |
2 x | Telemetry interface ALTIS 12 cm |
1 x | Sealing Iron Sleeve PROF |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
2 x | Piston ring for DLE-55/111/222 |
1 x | ULTIMATUM 2.0 m white |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Orange Multimo |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | F450/550 Quadcopter, landing gear |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Conector JR Servo male (10 pcs) |
2 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
2 x | 29,0 mm propeller (rigth propeller) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Interruptor On/Off Corto micro |
1 x | Transmitter JETI Duplex DS-24 EX Multimode |
1 x | 3 mm Prop Adapter M6 |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | Small aluminium horn red (2pcs) |
1 x | Colador RABBIT |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Fox 4000 mm with flaps (Airwold) |
2 x | DLE 111 Old Crankshaft keyway |
1 x | SunCover 2.6 Class (SebART) |
2 x | Threaded coupler M3 (10 uds) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Challenger ARF (Top Model) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Battery plate |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 10 mm Prop Adapter M12 |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Servo FUTABA S 9670 SV |
1 x | Motor DLE 20 RA cc |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | LA500 housing-lower cyclic |
1 x | Bird (Aero-naut) |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Switch Cap L (silver) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | 1,5x50 mm allen screwdriver |
2 x | Quick hose connector 6-6 mm |
1 x | Switch Cap L (black) |
1 x | Katana S 30E YELLOW/BLACK, Motor cowl (SebART) |
3 x | Altimeter Altis NAO |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Motor DLE 170 M- Paramotors |
1 x | SunCover 2.2 Class (SebART) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Program 5v SIO RS 232 |
1 x | Guide capes 25 mm (2 pcs) |
1 x | Propeller APC 14x10 Electric |
2 x | Blade holder upper |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | Tufnol Choke Lever Arm d=4,7mm |
2 x | 33,0 mm propeller (rigth propeller) |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | EDGE 540-A 91" (2310 mm) |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | Horn 6/27 with M3 Bearing |
2 x | Stainless Steel Muffler D.A. 35-70 |
1 x | Horn 6/20 with M3 Bearing |
2 x | 1000 ml sealer (DOPE) |
1 x | Fuel Fittings-Blue |
1 x | 110x55 mm SLH KOVO wheel |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Anchor of tow Met. 60 mm |
2 x | Servo Fork |
1 x | Header ZG 45/62, "wide" |
2 x | Muffler DLE 20 |
1 x | La Capitania di Venetia 1:50 |
1 x | Propeller APC 10x6 Electric |
1 x | Railing Ø 2mm (20 pcs) |
1 x | Giant Scale Muffler D.A. 150 (2 pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | Canopy Sweet / Siesta |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Rubber profile 10-2 mm 2M |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Q80-8M V2 |
1 x | Liferaft 47 mm |
1 x | Tow hook for tug |
2 x | 12 mm dogdrive props |
1 x | Sealing Iron Sleeve STD |
1 x | Ball Bearings for motor A60-V2 |
1 x | 12x8 tree blades propeller |
1 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
2 x | Tirpiz Battleship 1:200 |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Conector BEC male (10 pcs) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Hub DLE 30 |
1 x | Connectors MPX male (PIN double) |
2 x | Flap hinge (6 pcs) |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Connectors MPX female (PIN double) |
4 x | Cylynder DLE 20-RA |
2 x | DLE 111 pipe plug |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Steering arm 16 mm Ø 3 mm |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Black tray 2,4EX DC-16/14/24 black |
2 x | Propadapter for motor A50 |
1 x | Motor DA 150 |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | 3.2 mm Prop Adapter M8 |
3 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Jet Pipe 40N-80N (200 mm) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | DA 70 Twin Gas Engine |
1 x | Propeller electric carbon 10.5x7 |
1 x | Shirt Hispano Aviación |
2 x | 12 mm mast holder |
1 x | Gasket intake manifold - cylinder for ZG 74B/ZG 80G |
1 x | Intairco CMB Super Filter - 6mm Barb |
1 x | Electric starter BEE (old) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | Porex gasoline filter |
2 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Carburator screw DA50/60/100/120 |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
3 x | Dumper propeller 6/8 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
2 x | Screw M3x16 |
2 x | RCEXL Electronic ignition twin A-02 |
2 x | Connectors banna oro 2 mm (M/F) |
1 x | Piston pin for DA50R/DA100 |
1 x | LA500 rotor head shaft |
2 x | Ball joint long |
2 x | Miss ULTIMATE 50E Red/Black |
1 x | Piston ring for DA-85 and DA-170 |
1 x | Giant Scale Muffler D.A. 70 (2pcs) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Stainless steel silencer for DA 150/150L |
2 x | Long pinned hinge (6 uds) |
1 x | Spinner Alumin. propeller pleg. 40 mm / 4,0 mm |
2 x | Head core |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Blocking screws M6 gas engine |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Propeller APC 10x3,8 SF |
1 x | 15 mm reinforced hinge |
1 x | Gasket, from red carb carrier to crankcase DA-150L/170 |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Captador OS GT 33 cc |
1 x | Cierva C30 spanish decoration Stickers |
3 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 700 ml complete glow fuel tank |
1 x | KatanaS 50E, Decal set (SebART) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Adapter 4,0 mm M6 |
2 x | Keypad ALTIS V4 |
1 x | Transmitter Stick Ends JETI DS-16/14 |
1 x | Switch Cap M (silver) |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Head lower part New |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
2 x | 3,2 mm Prop Adapter M8 |
3 x | Anchor 80 mm (2 uds) |
1 x | Sheave Pl. 1R. 5 mm |
1 x | 3 blades set |
2 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Side rudder |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Muffler DLE-120 Right |
1 x | POWERBOX Magic Jeti Switch |
1 x | Glider PIROL |
1 x | Propeller APC 10x5 Electric |
1 x | Motor support DLE 55/55RA |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Guide capes 20 mm (2 pcs) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | MZ-10, 5 Channel HoTT |
1 x | Propeller electric carbon 10x8 |
1 x | Rudder |
2 x | Spray Graphit 33 |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Male connector for 20 pines AWG |
1 x | Mudguard for 140/165 mm wheels |
1 x | Set propellers 8x4.5 SF Carbon Multicopter (1x R - 1x L) |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Suction funnel for carburetor WALBRO 20-80cc (red) |
2 x | Canister combo DLE 55 cc |
2 x | DLE 55 RA pipe plug |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | 20x13 Falcon electric carbon prop (64g) |
2 x | Kerostarter K30G |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | LA500 housing-upper cyclic |
1 x | Flybar support metal LAMA |
1 x | ZENOAH ZG 62 SL |
1 x | Cable coupler M2x66 (2 uds) |
2 x | Carburetor DLE 30 |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | ABS tube 3.0x2.0x330 mm |
2 x | DLE 85/111/120 Crankshaft keyway |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Battery LiPo TATTU R-Line 1550 mAh 4S 14,8V 95C |
1 x | 500 ccm complete gasoline fuel tank |
2 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | Head core bushing |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Propeller electric carbon 10x6 |
1 x | Ball link M3 RPA's-UAV's |
2 x | Filler Gauges |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | 5 mm Prop Adapter M8 |
1 x | Propeller APC 14x7 Electric |
1 x | Stainless Steel Silencer side outlet for ZG 20/23/26 |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Extension Arm for Carburetor (red) |
2 x | Propeller 10x4,7 SlowFlyer |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Motor wall |
1 x | Swift 5050 mm (Airwold) |
1 x | DINO Glider ARC |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Carbon blade 230 mm |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Wheel FEMA 127 mm / 6 mm |
2 x | Micro flex hinge (12 uds) |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Crystal TX 35.050 Ch 65 |
2 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | DLE-55RA Ignition unit |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Cable coupler M3 (10 uds) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Ignition bed V2 Red color |
1 x | XT-30 connector (pair) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Propeller APC 13x6.5 Electric Pusher |
2 x | Aero-Master Fuselage (Aero-naut) |
1 x | EC-Cutter |
1 x | Propeller POWER-PROP 13x10 |
2 x | Head lower part |
2 x | Male connector for 16 pines AWG |
1 x | Quick hose connector 4-4 mm |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
2 x | Gates hinge 30x16 mm (2 pcs) |
1 x | SERVO DES 588 BB MG |
1 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
1 x | Round Rod 2,5x1000 mm |
1 x | MPX Sub-D Adaptor |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Heli blades angle measurer |
1 x | Blind nut M4 (4 pcs) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
2 x | Hot Glue Stick BLACK |
2 x | SLICK 360-A 104" (2640 mm) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Propeller APC 11x7 Electric |
1 x | 55% silver electrodes (2 pcs) |
1 x | Hinges 7x12 mm (20 pcs) |
1 x | Ball bearingfront for DA-50/60/VM120B2 Ball bearing for DA-170 |
1 x | Motor EME 60 cc with electric starter |
2 x | Hot Glue Stick GREEN |
1 x | Kwik link unmount tool |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | BABY glider (Aero-naut) |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | EXTRA 300L 1.2 m Blue |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Gold antispark 4 mm plug |
1 x | Rear cover O-ring 26/30 cc |
1 x | Front axi for DA85/DA100/DA100L/DA120 |
1 x | Lense for Spotlights, 20mm |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Hose clips 6 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Turbine RHINO 200 SE 20.4 Kg |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Collector screw DA |
1 x | 65 mm mini servo cover |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Extension Ø25mm x L: 60 mm |
1 x | Anchor 25 mm (2 uds) |
4 x | Motor DLE 200cc Premium Muffler |
3 x | Connectors banna oro 4 mm (M/F) |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | ESC Ripmax QUANTUM 80A SBEC |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Regulador NAVY 540R |
1 x | PPM Encoder Module |
1 x | Shaft sleeve LAMA |
1 x | Y-Hose connector 4-4-4mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Conector JR Servo female (10 pcs) |
1 x | DLE 55 Ignition unit |
1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
1 x | Header ZG 45/62, "normal" |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Carburator Moki S250 |
1 x | Propeller APC 14x8.5 Electric |
1 x | Fox 4000 mm (Airwold) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Strut M 1:32 3D (30 pcs) |
1 x | Propeller POWER-PROP 7x7 |
1 x | Screws M1,6x6 Allen |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
2 x | BULLIT Wing 1095 mm |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
3 x | Coupling bush 5 - 5 mm |
1 x | Short ball link M2 (6 uds) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
2 x | SE Ring 330 mm (4 pcs) |
1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | |
1 x | Propeller APC 13x6.5 Electric |
1 x | KatanaS 30E WHITE Landing Gear(SebART) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Castrol Oil A747 1l |
1 x | Cap Hispano Aviación |
1 x | Propeller APC 14x5.5 MR |
1 x | Heat Seal Iron |
1 x | 3 mm Short Prop Adapter M5 |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
2 x | Carburetor DLE 170M |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Telemetry interface ALTIS to Futaba |
1 x | Blind nut M3 (4 pcs) |
1 x | Engine Kolm BX-155-2 with starter |
1 x | Electronic fog horn |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Turbine KingTech K30G Restart |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Digital precision scale up to 2000 g |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
3 x | Gates hinge aluminium (1 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Canadair CL-415 (aero-naut) |
1 x | Reed valve cage with petals for DA 100/150 |
1 x | Fascination 3600 mm (Top Model) |
1 x | Check valve quick hose connector 4-4 mm |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Railing L250 mm (10 pcs) |
1 x | Glider IKARUS |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Blade holder center GFK 0,5 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Pick up EME 55/60 cc |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Propadapter for motor A60-V2 |
1 x | Motor EME 35 cc with electric starter |
2 x | Autogyro Cierva C30 Spain |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Crack TURBO Beaver Blue |
1 x | Blade holder lower |
1 x | Propeller 11x4,7 SlowFlyer |
2 x | Prop Shaft Adapter 5 mm "long" |
1 x | Gasket, insulator ZG 20 |
1 x | Spinner propeller pleg. 30 mm / 2,3 mm |
1 x | V tail SILENT DREAM 2.200 mm (Elec or Glider) |
1 x | Propeller 9x7 SlowFlyer |
1 x | M3 Maxi ball link (2 uds) |
1 x | DA-50R motor alumine support |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Propeller electric carbon 6x5 |
2 x | Avanti S 1.8m Jet RED Style |
2 x | X-RAY Micro QR (Rudder) |
2 x | Antenna holder bracket double |
3 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | Silencer with rear exhaust MTW TDH 110 |
2 x | Spannlack 1000 ml |
1 x | Dust collector for mould cleaning |
1 x | Propeller POWER-PROP 11x9 |
2 x | 4 mm Prop Adapter M8 |
2 x | 5 mm Prop Adapter M6 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | EDGE 540-A 74" (1880 mm) |
1 x | Propeller APC 12x6 Electric |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | Small aluminium horn gold (2pcs) |
2 x | Canopy Astra |
1 x | Race Outboard MERCURY type A |
1 x | Vest clothes Hispano Aviación |
2 x | Spray adhesive AEROFIX 2 |
1 x | Towing hook <3m |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Rotorhead pushrod |
1 x | Universal Colour Paste deep black 250 g |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Manual Controller |
1 x | Motor ST 7-160 B |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Bidule 111 3000 mm |
1 x | Steering lever |
1 x | Metal clevis M3 (10 uds) |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Class 30, Red wheel pants (SebART) |
1 x | ZENOAH ZG 26SC with magneto ignition |
1 x | Glases Innovation Plus |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
2 x | Oracover Azul Cielo 2 m |
1 x | Opto Gas Engine Kill Switch |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | TARANIS Q X7 |
1 x | LA500 Autogyro |
2 x | 3,0x60 mm allen screwdriver |
1 x | Gates hinge |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Switch Cap L (Red) |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | |
1 x | Mahagoni 1.0x100x1000 mm |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Reductora IPS 150 DX2BB-FXCS 11,8:1 |
1 x | 100g Flux Paste for Silver Solder |
1 x | Ventus 2cx 4.5 m |
2 x | Boat 43 mm (5 pcs) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Turbo Prop KS |
1 x | Propeller electric carbon 10.5x8 |
1 x | Motor DA 120 |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Cylinder ZG 26SC/SLH |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Cylinder DA-50R, DA-100, DA-100L |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | 5 mm M2 variable horn |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | KABRIOLIN 3D Electric 1.4m |
1 x | Towing hook |
1 x | Ferrita 14x8x5.5 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Adjustable launching hook |
1 x | Ignition for ZG 20/26 |
1 x | Tacometer mini ignition RCEXL |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Propeller electric carbon 6.5x4 |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Motor EME 70 cc with autostarter |
2 x | Rear bearing for motor 35/40 cc |
1 x | MythoS 125E WHITE/BLUE (SebART) |
1 x | MythoS 125E YELLOW/BLACK (SebART) |
1 x | La Capitania di Venetia accesories |
1 x | 30 cm MULTIPLEX female connector |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | DLE Ignition unit |
2 x | Muffler DLE 20-RA |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Propeller POWER-PROP 15x10 |
2 x | Blade holder metal LAMA |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | ZENOAH G270RC |
1 x | Porpeller HUNTER 400 |
1 x | LA500 front gear holder |
1 x | EXTRA 300L 1.2 m Deep Purple |
1 x | Tail support (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Remolcador "Jonny Hafenschlepper" |
1 x | 30 cm DEANS female connector |
2 x | Bearing 3x6x2,5 |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
2 x | Device Terminal |
2 x | Bag connector 2 mm |
1 x | Cockpit metalic closing |
2 x | Nitroverdu 500 ml |
2 x | 2,0x50 mm allen screwdriver |
2 x | Nut M2 securing |
1 x | 26x18 BIELA propeller |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Ignition for ZG motors |
1 x | Silicone black 1,0 qmm wire (100 m) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,0 mm |
1 x | Silentblock DLE 170M |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Micro clevis (10 uds) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Reed valve for DA 50-R |
2 x | Sparkplug DLE CM6 |
1 x | Extinguisher CO2 - 2 Kg |
1 x | 25 mm reinforced hinge |
1 x | Propeller POWER-PROP 11x8 |
1 x | switch 1-Spring-DOWN 3-position DC Tx DUPLEX 2,4EX |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Muffler DLE 30 |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 3 mm Prop Adapter M6 |
2 x | Nut M2 |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
2 x | Canister combo DLE 120 cc |
1 x | Canister combo DLE 120 cc |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Altimeter Altis V4 |
1 x | Chili F3K 2 wing servo mounted |
1 x | Round Rod 3,0x1000 mm |
2 x | DLE-111 Crankcase V2 Conversion Kit |
1 x | Carburator spacer block DA-50R |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | L ELBOW 90º ø 25 mm |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | Aero-Master (Aero-naut) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
2 x | Oils Pumps Empty (1 liter) |
1 x | Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120 |
1 x | Motor DLE 55 RA |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | ESC 40A. Opto starter Kolm |
1 x | Round Rod 6,0x1000 mm |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Carburetor for DA150L/170 |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Profile ABS half cane 4x1000 mm |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | BABY glider drawings (Aero-naut) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Motor A30-12 XL Glider |
2 x | Canister combo DLE 111 cc |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Propeller POWER-PROP 12x6 |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | SLICK 360-B 104" (2640 mm) |
1 x | Round flex hinge (12 uds) |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
2 x | 2 mm Prop Adapter M6 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Heli blades angle measurer |
1 x | Propeller APC 13x10 Electric |
5 x | Big Crow DLE-170M |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | RH long aluminium horn (2pcs) |
1 x | Avia (Top Model) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Propeller APC 10x7 Electric |
1 x | Low speed needle DA-50R/100I |
2 x | 14 mm portholes (10 pcs) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Foreman, scale 1:32 |
1 x | Propeller APC 11x8 Electric |
1 x | Wheel FEMA 112 mm / 6 mm |
2 x | 250 mm / 16 mm Airbrakes |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Propeller APC 12x3.8 SF |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Motor DLE 30 cc V2 |
2 x | Sensor Ignition DLE 20/20RA/30/35RA/55/55RA |
1 x | ASW 15 5000 mm (Airwold) |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | Motor A30-12 L V4 |
1 x | SOLOFOX 5m Voll-GfK |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
2 x | Kit repair carburator DLE-170 |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Ventral support for AX-18/AX-60 |
1 x | 25 mm fenders (10 pcs) |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | Piston ring for motor 58/116 cc |
2 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Katana 30, Decal set (Sebart) |
1 x | A60-6XS V4 28-Pole |
1 x | Motor rotor LA-500 |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | SE-M Filter |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | LA500 ciclic lever |
1 x | Glider Ka 7 Red (2540mm) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Threaded coupler M2 (10 uds) |
2 x | Avia spare blue cockpit (Top Model) |
2 x | 3,2 mm Prop Adapter M6 |
1 x | Motor Moki 180 |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Female connector for 16 pines AWG |
1 x | Propeller POWER-PROP 14x12 |
1 x | Blind nut M2 (10 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Connectors DEANS (T) micro |
1 x | Dremel PERMAGRIT thin lime |
1 x | Power Pack SE Series JETCENTRAL |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Fascination 3600 mm, Canopy (Top Model) |
2 x | MB339 Mini 1.45m White/Orange ARF +elec.L.Gear + 3 Microser |
1 x | Battery FUTABA 18MZ |
1 x | Silencer for ZG22, ZG23, ZG231SLH, G2D96-D |
1 x | Capstan of plastic 88x30x36 mm |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Reed valve petal for DLE 111 |
1 x | 10 mm portholes (10 pcs) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Ignition for DA-50-R, DA-60, DA-85 |
1 x | Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26 |
1 x | ROBIN S50E BLUE/WHITE |
1 x | Ferrita 27x14x7 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | CC 11 Conector |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Z Bender - S Type Tool |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Connectors DEANS (T) |
1 x | CM-3 |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Wings carryng bags 30 class (SebART) |
1 x | Telemetry interface ALTIS 6 cm |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Motor OS MAX 160 AX |
1 x | Astra wing Joinner (Top Model) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Program Card G2 RAY |
1 x | ESC RAY G2 R-60SB SBEC |
1 x | Ball link M1.6 (6 uds) |
1 x | Glases Aspen |
1 x | Nut M1,6 |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Fuel Station 20L |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Decorative caps, multicoloured, short |
1 x | Spring clamp for tube Ø50 mm |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | ULTRA STICK 30 cc ARF |
2 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | Dremel 3000 130W |
2 x | 31,0 mm propeller (rigth propeller) |
1 x | 200 Newtons FEMA absorber |
1 x | Quick hose connector 6-4 mm |
1 x | Chili Race F3K (aramid nose) |
1 x | E-FUN BUG (ROI-Import) |
2 x | Xoar Electric Beechwood Prop 21x10 |
2 x | Piston ring for DLE-20 |
1 x | Capstan of plastic 125x72x45 mm |
1 x | Opto Gas Engine Kill Switch |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
2 x | Selfstarr EME35 |
1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
1 x | 2 piece mounting frame |
1 x | Propeller 3x3 |
1 x | Komet Pump |
1 x | Adap/Exten for Futaba 12-14C |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
1 x | Crystal RX 35.120 Ch 72 |
1 x | |
1 x | Bidule 170 ARF 3.48 m |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | Cylinder for DA-60 and DA-120 |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pitts Muffler for D.A. 120 |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Propeller POWER-PROP 10x6 |
1 x | Strip 3,5x1,75x330 mm |
1 x | 28 mm turnbuckle |
2 x | Large flex hinge (12 uds) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Silencer ZG62, new version |
2 x | FESTO connector M5 Quick 4 mm |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Propeller POWER-PROP 14x8 |
1 x | PBS TJ 40-G1 Turbine |
1 x | 60x25 mm tail wheel "type F3A" |
2 x | 2,3 mm Prop Drive Günther M4 |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Albatros red/white (Top Model) |
1 x | Optotronix Aurora Plug |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R |
1 x | Crankcase gasket DA 170 |
1 x | LUNAK 4,00 m |
1 x | Motor DLE 60 cc Twin |
1 x | |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Cierva C30 Body Spain |
1 x | Rotorshape Elevator |
1 x | Gobe R-26S (Airwold) |
1 x | Propeller electric carbon 10x7 |
1 x | Motor DA 60 |
1 x | KS86 S-6 muffler up to 65cc |
1 x | Straightened threaded rod M2-1m |
1 x | Gasket for motor DA 50 |
1 x | Spark motor OS nº 8 |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Rotor Mast |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | SEBART 50E V2, Wheel pants white(SebART) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Tube bender |
2 x | Anchor 25 mm (2 uds) |
1 x | Allen wheel collar M3x5 |
2 x | 4 mm Prop Adapter M8 |
1 x | Switch Cap M (black) |
2 x | Telemetry interface ALTIS 20 cm |
1 x | Blind nut M8 (10 pcs) |
1 x | 4 blades set |
1 x | 20x15 Falcon electric V2 |
1 x | 290 mm M5 Prop shaft |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Kit hydraulic brake |
1 x | BIG MOSNTER |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | T- Fittings blue color (2pcs) |
1 x | Gold antispark 5,5 mm plug |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Balls 4 mm |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Round Rod 1,5x1000 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | 11 mm wing servo holder |
1 x | Joint with bearing M2 22x5,5 |
1 x | Conector JR Servo male (10 pcs) |
1 x | Switch for DC: Long 3 Position |
1 x | Telemetry JETI |
1 x | 4 mm Prop Adapter M6 |
1 x | Tape GFK 50 mm |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Aluminium ignition bad (red) |
1 x | Cierva C30 simulated motor |
1 x | Extension Arm for Carburetor |
2 x | 18 mm reinforced hinge |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
1 x | Receiver FUTABA R6004 FF FAST |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | 5 mm Prop Adapter M8 |
1 x | Head spacer |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Motor RACE 720 Navy 12v |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | Ka 8 B (Top Model) |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Set Altimeter SHRead |
1 x | Fishing boat Jule Fischkutter |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | METEOR 1.000 mm kit |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller APC 11x5.5 Electric |
1 x | Fuel Fittings-Red |
1 x | Motor DA 50-R |
1 x | Decorative caps, multicoloured |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Smoke Oil Blue 5 l |
1 x | Propeller hub spacer 8/5.5 |
1 x | Cilinder joint for G230RC/G260RC |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | FUTABA T10 J T-FHSS |
1 x | Propeller electric carbon 9.5x5 |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Quick hose connector 4-3 mm |
2 x | Xplorer3 anemometro |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | 39,0 mm propeller (left propeller) |
1 x | Pick up DA50/100/150 |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | Motor Moki S 400 cc 5 cylinders |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | 90x75 mm standart servo cover |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Ball Link Plier |
1 x | Fod Guard 83x32 mm |
1 x | MultiLog Altimeter |
1 x | Boat 140 mm |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Stainless Steel Bend D 15x0,4mm |
1 x | Baering 3x8x4 |
1 x | Propeller APC 15x4 Electric |
1 x | 12x6 tree blades propeller |
1 x | Ferrita 17x10x6.5 mm |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carburetor DLE 170 |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Washer 2.2×4 |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Motor DLE 35 RA |
1 x | Towing hook |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | 3-Blade Spinner 85 x 80 mm GFK |
1 x | LA500 pilot-seat set |
1 x | USBCOM 5i |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller APC 11x10 Electric |
1 x | Q-12 X-light 2000 mm Electric |
1 x | Axi for MVVS 3.5 Sport |
1 x | SunCover 50 Class (SebART) |
1 x | Sheave Pl. 2R. 12 mm |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | SAGITA Alsema 4.0 m |
1 x | Ball Link Plier |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Wheel 28 mm |
1 x | Boat 82 mm |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | GRAFAS MAXI ARF |
1 x | KatanaS 30E YELLOW/BLACK Tail Set (SebART) |
1 x | L ELBOW 90º ø 25 mm |
1 x | Motor RACE 20 Navy 12v |
1 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Ferrita con funda |
1 x | Aluminium-screw, M5x16mm Red |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
1 x | CRACK YAK (Mini) 600 mm |
1 x | Gracia (Top Model) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Male connector for 12 pines AWG |
1 x | Stainless Steel Bend D 18x0,5 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 6 mm M3 variable inclined horn |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | CORTEX |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Trailing leg 131 mm |
1 x | Navaho new design (Top Model) |
1 x | Porpeller HUNTER 480 |
1 x | Motor DLE 120 cc |
1 x | Gasoline big filter |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Reed valve petal for DLE 170M |
1 x | Crimping tool |
1 x | Neck strap JETI DC |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Rotorshape Autogyro |
1 x | Cable video GoPro and 5V cable |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | Glider STROLCH |
1 x | Propeller APC 10x10 Electric |
1 x | Digital scale up to 40 kg |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | LA500 freewheel bearing |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Simple take for fuel tank |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Conector BEC female (10 pcs) |
1 x | Telemetry SPEKTRUM |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 38 mm fenders (10 pcs) |
1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
1 x | Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210 |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Motor DA 85 |
1 x | Parachute XTRALITE S |
1 x | Hifht speed needle DA-50R/100I |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | Muffler ZG 20 |
1 x | 8Wx2 Gears-Spotlight, UltraPower, 20mm White |
1 x | Propadapter for motor A50-V3 |
1 x | Motor A60-5XS V4 28-pole kv420 |
|
382,639.96EUR |