800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Adaptadores carga 6s JST-XH
1 x Extension MPX-MPX 20 cm
1 x Starter EM Gear Power 80
1 x Turbina KINGTECH K320 G5
1 x Conector MR-60 (pareja)
1 x DYNAMOMETER S-1580
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Spray adhesive AEROFIX 2
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Cabling for Fox MDM1 wings
1 x Connector Sub-D 2+5 Female
1 x Oracover Yellow CADMIO 2 m
1 x Oracover Black 10 m
1 x 250 mm / 16 mm Airbrakes
1 x Wings Bags JEEMO
1 x Astra (Top Model)
2 x Swift ARF 2000 mm Red (Hacker Model)
1 x ASH 31 Mi Scale:1/3 - 7m
1 x Lunak ARF 2000 mm Yellow (Hacker Model)
2 x Aro pasacable Ø25 mm (4 pcs)
1 x Crystal TX 35.010 Ch 61
1 x Chili F3K 2 wing servo mounted
1 x Crystal Universal RX 35.030 Ch 63
1 x Crystal Universal RX 35.150 Ch 75
2 x Transmitter Crystal 35 Mc/s Ch 77
1 x Support XT60 conector (2 pcs)
1 x Crystal TX 35.050 Ch 65
2 x Support Pitot JETI
1 x Crystal TX 35.180 Ch 78
1 x Crystal Universal RX 35.090 Ch 69
1 x Soporte grifo FESTO (2 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Metalic nose for PROJETI
1 x Swashplate metal LAMA
1 x Carbon blade 3D 230 mm
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x GLOW 9C + accesories
1 x Compact on-board starting system (9713)
1 x Variable Flow Smoke Pump System
1 x 50m servo "Premium" wire (white/red/blue)
1 x White silicone 0,25 mm² wire (25 m)
1 x Xplorer3 anemometro
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x Support ECU Xicoy X-45
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x TMM 1210-3S heli
1 x Motor mount VANQUIST 48" F3A
1 x Support Filtro FESTO
1 x Support pump Xicoy X45
1 x Support pumb/filter Xicoy X45
1 x Soporte grifo FESTO vertical (1 pcs)
1 x ESC PULSAR A-40
1 x ESC RAY G2 R-20B BEC
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Fournier RF-4D
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x 2 mm female connector (2 pcs) with safety connector
1 x 2 mm male connector (2 pcs) with safety connector
1 x Motor Moki S 500 cc 5 cylinders
1 x Header ZG 45/62, "normal"
1 x Drilling-template set for Moki engines Moki S150, S180, S215, S2
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Cylinder for ZG20
1 x Motor DLE 60 cc Twin
1 x Insulator block ZG 38/S/SC
1 x 3 LiPo XH>EH adapter
1 x DA-50 Carburator
1 x Carburator Moki S400
1 x Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole
1 x Air filter MOKI
1 x Motor DLE 40 cc Twin
1 x Motor Moki S 250 cc 5 cyl with autostarter
1 x Double side nipple
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x 6 mm Quick clamp_S (10 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x Moki Exhaust Bend 50VT
1 x Flex-headers for Valach VM 85B2-FS
1 x Carburator Moki S250
1 x 3,0x60 mm allen screwdriver
1 x Crankcase Gasket set for ZG 74 / ZG 80
1 x Escape Moki 100 BVT
1 x Canister combo DLE 111 cc
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Fixing Ring with Base 40 mm
1 x 30 cm BEC cable (female)
1 x Header ZG 45/62, "wide"
1 x Motor DLE 20 cc
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 1,5x50 mm allen screwdriver
1 x 5 LiPo XH>EH adapter
1 x Intake tube ZG 74/80, DA85, VM 170-420 with special screws
1 x Motor DLE 120 cc
1 x Motor MOKI S 250 cc 7-cylindrer
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Motor Moki S 250 cc 5 cylinders
1 x Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x Aluminium carb bend for ZG 45SL
1 x 4 LiPo XH>EH adapter
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Fixing Ring with Base 60 mm
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x Motor DLE 65 cc
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Insulator block ZG 38/S/SC
1 x Gasket carburettor/insulator for ZG 38/S/SC
1 x Motor Moki S 400 cc 5 cylinders
1 x Motor MOKI S 350 cc 7 cylinder
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Baffles for Radial Moki S180/320 mm
45,004.37EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies