1 x | Extinguisher CO2 - 2 Kg |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Oracover CHROME 2m |
1 x | Pilot "Goose" (Slimline) |
3 x | 1/6 Pilot "John" |
1 x | Ply-Span 450x600/13g Black |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Oracover ROYAL RED 2m |
1 x | 1/4 Pilot "Heidi" |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | 1/7 Pilot "Japanese" |
1 x | Oracover Green10 m |
2 x | 1/12 Pilot "Tom" |
1 x | Oracover Yellow CUB 10 m |
1 x | Oracover Yellow CADMIO 2 m |
1 x | ORACOVER Fluor red (2 m) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/12 Pilot "Fighter" |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | 1/6 Pilot "Cindy" |
1 x | 1/6 Pilot "Tony" |
1 x | Oracover White 10 m |
2 x | 1/10 Pilot "Jimmy" |
1 x | Oratex Antik 2m |
1 x | Piloto jet 130 mm |
1 x | Oratex Natural White 2m |
1 x | Ply-Span 450x600/13g Red |
2 x | CM-3 |
2 x | Dean "T" - Futaba Adapter |
1 x | 5 LiPo XH>EH adapter |
2 x | 2 LiPo XH>EH adapter |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Adapter lead MPX/XT60 |
2 x | 3 LiPo XH>EH adapter |
2 x | 30 cm BEC cable (female) |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | JETImodel SINGLE BEC |
2 x | Circlick securite |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | CC 02 |
1 x | Cabel charger transmitter GRAUPNER |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Socket head ball link M3 (2 uds) |
2 x | Ball link M2 (10 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Long ball link M2 (6 uds) |
2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | 6 mm ball link M3 (10 pcs) |
1 x | Socket head long ball link M3 (6 uds) |
1 x | M3 Maxi ball link (2 uds) |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Straightened threaded rod M3 - 1m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
3 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Optical RPM Sensor |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | 19 mm 2:1 black termoretract tube |
1 x | SIG Coverall 1.2x0.9 m |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | 1/12 Pilot "Cougar" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Support Pitot JETI |
1 x | Sparkplug Champion RCJ-7Y for ZG |
2 x | CC 05 |
1 x | PSC 5 |
1 x | 4 LiPo XH>EH adapter |
1 x | PSC 6 |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | DPSI Ampere battery backer |
1 x | Extension 2/3 lipos JST/C |
2 x | Connector CAN 15 |
1 x | CC 01 |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Socket head ball link M3 (2 uds) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Long ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
2 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | Straightened threaded rod M2-1m |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Carbon plate 350x150x0.5 mm |
2 x | EME ignition free wheel |
1 x | Oils Pumps Empty (1 liter) |
1 x | 18m Fitting barb |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | Carburator Moki S400 |
1 x | Propadapter for motor A60-V2 |
1 x | Muffler ZG 20 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Foam plastic plates (310x210x2 mm) |
2 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
2 x | Dia. 20x15 mm teflon tube for escape |
2 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Carburetor DLE 20 |
1 x | Blocking screws M6 gas engine |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | DLE Ignition 111/120/170 |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Carb spacer mounting block ,red DA-60/70 |
1 x | CILINDER FOR DLE 55RA |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Aluminium ignition bad (red) |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Motor DA 170 |
1 x | Motor Moki 100 BVT |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Carburator screw DA50/60/100/120 |
2 x | 10 mm gas motor standoff |
1 x | Ball Bearings for motor A60-V2 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
2 x | Piñon motor autostarter 60cc |
1 x | Piston ring EME 35cc |
2 x | Motor EME 60 cc with electric starter |
4 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Power Pack SE Series JETCENTRAL |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Dumper propeller 6/8 mm |
1 x | Oratex Natural White 20m |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Oracover Black 10 m |
1 x | Stick coupler Ms 15 mm |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
1 x | ASPIRE Navy ARF 2.000 mm |
1 x | SIG Coverall 1.2x4.5 m |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Ventus 1:4 set of instruments |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
1 x | Engine mounts for .09 - .19 engine |
1 x | Esc master MEZON 120 Lite |
1 x | ALU double servo arm 3 mm shaft |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | KIRA 600-38 6,7:1 |
1 x | AXI 2820/10 V2 Long |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | AXI 2217/12 V2 |
1 x | AXI 2826/10 V2 Long |
1 x | PYRO 650-103 Long Axi |
1 x | Aluminium ignition bad (blue) |
1 x | ITRAP 50 (175ML) CLASSIC PRO, COMPRESSION BARB FITTINGS - SUIT X |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Pendulum glow tank |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | 5 mm gas motor standoff |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 90° TUBE-ANGLE Ø 28 mm |
1 x | 30 mm gas motor standoff |
1 x | TrainerCord (master-learner) |
1 x | PowerBox SparkSwitch RS |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
2 x | SPS 70V 100/200 A |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Motor OS 3820-1200 electric |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | OS 37 SZ-H, Bulon piston |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | Two-function control switch + button by FUTABA |
1 x | Esc MasterSPIN 75 Pro OPTO |
1 x | Esc X-40-SB-Pro |
1 x | ALU servo arm 3 mm shaft |
1 x | Esc MasterSPIN 100 Pro |
1 x | Esc MasterSPIN 80 Pro |
1 x | Esc X-75-OPTO-Pro |
1 x | Esc MasterBasic 55SB |
1 x | Master MEZON 120 |
1 x | Esc MasterSPIN 16 Pro |
1 x | ESC MEZON 115 Opto |
1 x | Esc MasterSPIN 99 Pro OPTO |
1 x | Esc X-30-Pro BEC |
1 x | Esc MasterBasic 70SB |
1 x | Esc MasterBasic 90 Opto |
1 x | Servo AN-20 MGBBA |
1 x | Esc MasterSPIN 66 Pro |
1 x | Motor A50-12 L V4 |
1 x | AXI 2820/8 V2 Long |
1 x | Motor Moki S 500 cc 5 cylinders |
1 x | Motor A30-14 M V2 6 Poles |
1 x | KIRA 480-43 |
1 x | KIRA FAI 5F5/4s |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Motor A20-20 L EVO |
1 x | 20x15 Falcon electric V2 |
1 x | KIRA 480-31 5,2:1 |
1 x | Moki Carburetor Throttle Arm with Extension |
1 x | PYRO 750-50L Competition |
1 x | AXI 2826/8 V2 Long |
1 x | AXI 2814/20 V2 Long |
1 x | MOKI S250 Intake Bend |
1 x | KIRA 400-34 |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | AXI 2212/12 V2 |
1 x | KIRA 600-30 6,7:1 |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 600-17 |
1 x | AXI 2826/6 V2 Long |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Shaft for A60-L (140mm) |
1 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Hopper 125 ml XICOY with support |
1 x | FESTO Filter 4 mm |
1 x | Hopper UAT Sebar 600 ml |
2 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Deposito DUBRO 1800cc-60oz |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Fuel station 10L incl. pump electric |
1 x | DA-50R motor alumine support |
1 x | Joint with bearing M3 22x5,5 |
1 x | UMS radial-engine, 7 cylinder 160ccm, gas |
1 x | SAITO FA40a 6.6ccm |
1 x | COMFORT MOUNT ø 55 mm |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | Air Intake manifold 90° - Large |
1 x | O-ring Saito FG-73 5cyl |
1 x | Motor UMS Radial-5-125cc gas |
1 x | Motor UMS Radial-5-150cc gas |
1 x | Motor EME 70 cc with autostarter |
1 x | One Way bearing for EME35 starkit with key |
1 x | Selfstarr EME35 |
1 x | Motor EME 35 cc with electric starter |
1 x | Motor EME 35 cc |
1 x | Motor EME 70 cc |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | CDI EME 120cc |
1 x | CDI EME 55/60 cc |
|
52,764.20EUR |