Top » Catalog » Motors & Turbines » Explosion » Gasoline » Zenoah/ZG » TC2666

330.00EUR

ZENOAH ZG 26SLH Helicopter Engine
[TC2666]

Titan ZG 26SLH Helicopter Engine 26 ccm

New cylinder for considerably more power and efficient cooling.
Very thin piston ring for minimal friction and maximum power.
Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.
Small Champion spark plug RZ7C with 10 mm thread.
Compact diecast crankcase.
Double counterbalanced crankshaft, very accurately aligned for the necessary concentric running, supported in three ballbearings. Needle roller bearings in conrod.
Walbro carburetor fitted with a priming pump to fill the carburetor for starting and a efficient airfilter intake silencer with integrated choke flap.
Robust pullcord starter

The new cylinder with the very thin high performance single piston ring is adapted from the extremely high power G230RC car engine for helicopter use. This new cylinder has four retaining screws as apposed to two for the G230RC cylinder. The extremely wide cooling fins are invaluable for helicopter use.
Other components are also optimized for helicopters, for example the crankshaft is very accurately aligned for the necessary concentric running. There is a very robust pullcord starter as well as very efficient airfilter intake silencer fitted to this engine. The carburettor is fitted with small priming pump to fill the carburettor for starting.
The Walbro carburettor is extremely reliable, is designed for the higher rpm involved, the completely dependable magneto ignition without contact breaker, the clean running due to low dilution full synthetic oil resulting in the absence of the smelly smoke trail, the availability of the fuel at every filling station with it?s very low price. These are some of the arguments resulting in the popularity of first the ZG 22 and then the ZG 23SLH, are now exactly relevant to the ZG 26SLH.

Specifications:
Capacity: 25,4 ccm
Bore: 34 mm
Stroke: 28 mm
Compression ratio: 8.8 eff.
Power: 2.2 hp/1.62 kW
Torque: 1,48 Nm
Power with tuned pipe: >3.0 hp/>2.2 kW
Weight: 1580 g without muffler
Fuel: 1:40 BEL RAY H1-R / Petrol

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor ER-120 M3-34mm eje
21.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
2 x	M3-M4 rubber washer (8 pcs)
2 x	Lock washer 3.2 mm (20 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
3 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
3 x	25 mm reinforced hinge
1 x	Gates hinge
1 x	Micro flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	SUS wire 3m (nylon coated)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Adjustable launching hook
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn 5/10 with M2 Bearing
3 x	RH long aluminium horn (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	20 mm carbon horn
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	6 mm red aluminium threaded horn with patella
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Towing hook
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Towing hook
1 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Horn for flap control (1 pcs)
1 x	Cable control set
1 x	Cable with accesories
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Fixed launching hook
1 x	Oracover Azul Cielo 2 m
2 x	M3 Maxi ball link (2 uds)
1 x	Joint with bearing M3 22x5,5
2 x	Socket head ball link M3 (2 uds)
1 x	Oratex Natural White 2m
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Oracover ROYAL RED 2m
1 x	Joint with bearing M2,5 22x5,5
1 x	Oratex Antik 2m
2 x	Oracover Brown 2 m
2 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Oratex Silver 2m
1 x	Oracover White 10 m
2 x	MYLAR film A350 (1000x500 mm)
2 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Oratex Red Fokker 10 m
2 x	Socket head long ball link M3 (2 uds)
1 x	Oracover Black 2 m
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover CHROME 2m
1 x	M3 Maxi ball link (2 uds)
1 x	Ball link M1.6 (6 uds)
1 x	ORACOVER transparent Yellow (10 m)
3 x	Ply-Span 450x600/13g Blue
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Red 2 m
2 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Ball link M3 (6 uds)
1 x	Oracover Green10 m
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Paramotor BackPack XXS (without accessories)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	White smoke canister 140 g
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	SIMtransmitter 6 Mode 2
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Softshell Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Rocket D3-P
1 x	Rocket D9-7
2 x	Pan Head Screw M2x6 PH
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Oracover GREY Seafire Sea 2m
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Socket head ball link M3 (2 uds)
1 x	Control horn long w/ball
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Hexagonal Nut M4 (20 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Flap hinge (6 pcs)
1 x	Small pinned hinge (6 uds)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Small pinned hinge (12 uds)
1 x	18 mm reinforced hinge
2 x	Aluminium wide washer M3 red (4 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Long pinned hinge (12 uds)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Cockpit plastic closing
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Allen wheel collar M4x4
1 x	Clip fixing for wing (2 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	Strip 3,5x1,75x330 mm
2 x	Round Rod 1,25x1000 mm
1 x	40 mm air cylinder
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	90 mm rods + T patellas set for direction control
1 x	80 mm rods set for direction control
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Blade holder metal LAMA
1 x	45 mm rods + T patellas set for direction control
1 x	6 mm M3 variable inclined horn
1 x	NF-3 RC set
1 x	Rudder forward 80x28 "type Kato"
1 x	Oracover Azul 2 m
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Short ball link M2 (6 uds)
1 x	SERVO HOLDER
2 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Oracover Orange 2 m
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	Horn 5/15 with M2 Bearing
1 x	Micro control horn T2 Ø 1
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Extra long horn 60x30
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	PVC red battery termo-retract 68 mm (10 m)
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Oracover light Grey 2m
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	A50 Motor Mount Alu complete set
1 x	Size "M" motor holder for class 600
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Frontal support Speed 600
1 x	Size "M" motor holder for class 400
1 x	Shirt Hispano Aviación
1 x	Size "L" motor holder for class 600
1 x
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Cooler motor type 400
1 x	Frontal support Speed 280
1 x	Cooler motor type 300
1 x	Motor mount M
1 x	Metalic motor holder for class 550-600
1 x	Frontal support Speed 400/480
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	Socket Head Screw M2,5x12
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Air pressure gauge
1 x	Combo lighting module with covering drop shape
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x	Screw M2.5x20 (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Towing hook <3m
1 x	Short ball link M3 (6 uds)
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Propeller APC 10x5 Electric
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 11x4.7 SF
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 10x7 SF
1 x	Propeller APC 10x5 Electric Pusher
1 x	Pin hinge 39x20 mm (10 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	FALCON 29X9 CARBON PROPELLER (GAS)
1 x	FALCON 26X10 CARBON PROPELLER (GAS)
1 x	Propeller FALCON 5-BL 24x23.5
1 x	Propeller FALCON 27x10 3-BL carbono-gas
1 x	FALCON 24X12 CARBON PROPELLER (GAS)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	140 mm rods + T patellas set for direction control
1 x	45 mm rods set for direction control
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Vess propeller 13x6 S
1 x	Propeller MEJLIK 28.5x12 S-3 Blades
1 x	Propeller MEJLIK 29x10S
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Split M1,2x10 (10 pcs)
1 x	Resistor 3W 5% OR82
1 x	Landing lights 18 mm (0.71in)
1 x	LOWER TOW HOOK
2 x	3,2x1000 mm 2:1 black termoretract tube
2 x	6,4x1000 mm 2:1 blue termoretract tube
2 x	PVC blue transparent battery termo-retract 95 mm (1 m)
2 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	1,2x1000 mm 2:1 black termoretract tube
2 x	2,4x1000 mm 2:1 green termoretract tube
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Motor DA 120
1 x	Cylinder DA-50R, DA-100, DA-100L
1 x	Woodruff key for DA50/85/100/150 and DA 200
1 x	Head Gasket 30cc (3 pcs)
1 x	Air Intake manifold 90° - Large
1 x	ZENOAH ZG 62 SL

6,871.29EUR