419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Ferrita 14x8x5.5 mm
2 x Ferrita 27x14x7 mm
2 x Ferrita 17x10x6.5 mm
1 x Ferrita con funda
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Piloto jet 130 mm
1 x 1/6 Pilot "John"
2 x A/C quality beech plywood 1520x750x3.0 mm
2 x Balsa panel 6.0x100x1000 mm
1 x Balsa panel 10x100x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
2 x BALSA triangular 15x15x1000 mm
2 x Balsa panel 5.0x100x1000 mm
3 x A/C economy plywood 600x300x6+.0 mm
1 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
3 x BALSA trip 10x10x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 8.0x100x1000 mm
2 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
2 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Balsa panel 1.5x100x1000 mm
3 x Balsa panel 1.0x100x1000 mm
2 x A/C quality beech plywood 1520x750x4.0 mm
3 x BALSA triangular 6x6x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
3 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
3 x Balsa panel 4.0x100x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
2 x Slave-cable USB Easy Sim
2 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Interface Jack Adapter IKARUS
1 x GameCommander USB Universal
1 x Interface Realflight Simulator
1 x Softshell Hispano Aviación
1 x Cap Hispano Aviación
1 x Shirt Hispano Aviación
1 x ABS tube 18.0x16.0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Joint with bearing M2 22x5,5
1 x Propeller POWER-PROP 14x9 Izda
2 x Propeller electric carbon 6x5
2 x PROPELLER ELECTRIC glass 9,5x6
1 x Telemetry interface ALTIS 20 cm
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
1 x PT 21x13 EL Propeller 3 Blade
1 x Propeller APC 12x6 Electric
1 x Propeller APC 10x4.7
1 x Propeller APC 13x4 Electric
1 x 76 mm light wheels (2 pcs)
1 x 21x14 Falcon electric carbon prop (64 g)
2 x EVP Unit for AXI2208/xx and 2212/xx
1 x Propeller APC 10x5 Electric Pusher
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x X-RAY Micro QR
1 x Glider STROLCH
1 x E-FUN BUG (ROI-Import)
1 x X-RAY Micro QR (Rudder)
1 x Balsa panel 2.0x100x1000 mm
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x ASW 20 5000 mm with winglets (Airwold)
1 x Pilot JAN 1/4 Saiplanes
1 x 1/12 Pilot "Fighter"
1 x 1/10 Pilot "Jack"
1 x Piloto Jet "Green" 1/6 Scale
1 x Pilot "Anthony" (Slimline)
2 x 1/12 Pilot "Tom"
1 x 1/4 Pilot "Mike"
1 x 1/6 Pilot "Tony"
1 x 1/6 Pilot "Cindy"
2 x Beech dowels 3.0 x 1000 mm
1 x Muffler ZG 20
1 x DLE Ignition 170M
1 x Birch plywood plate 600x300x1.5 mm
1 x DLE 55 Muffler
1 x DLE 30 complete electronic ignition
1 x Pine wood slat 2.0x2.0x1000 mm
1 x VALACH Motors VM 70 S1-4T
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Cylinder head, left for VM 170/210
1 x Gasket intake manifold - cylinder for ZG 74B/ZG 80G
1 x Gasket set DLE-120
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Cilinder joint for G230RC/G260RC
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
3 x Balsa panel 2.5x100x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Ignition module ZG 38/S/SC
1 x BALSA triangular 10x10x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x Servo M2x9/16 screw (4 pcs)
2 x Beech dowels 2.0 x 1000 mm
1 x Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R
1 x A/C quality beech plywood 600x300x1.5 mm
2 x 8Wx2 Navigation & Strobe, 11mm Red/White
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x MultiLog Altimeter
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Cylinder gasket per 1 for ZG 74B/ZG 80B
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x ESC 40A. Opto starter Kolm
1 x Gasket set DLE-55
1 x Gasket set DLE-55RA
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Muffler for Titan ZG 26SC/EI
1 x Silencer kit ZG 45/62
1 x BALSA trip 5.0x5.0x1000 mm
1 x DLE 55 Ignition unit
2 x Birch plywood plate 600x300x3.0 mm
1 x Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Ball bearing 6002 DLE
1 x 
1 x BALSA trip 8.0x8.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x 
1 x Castrol Oil A747 1l
1 x Motor NGH GT-9 V2
2 x Carburator joints for SAITO FA80/80GK/72/72GK
1 x Smoke Oil Blue 5 l
1 x 3 mm Prop Adapter M6
1 x 110x55 mm SLH KOVO wheel
1 x 4 mm Prop Adapter CN-Spinner
1 x RF9 Flight Simulator with Spektrum Controller
1 x 18x6 BIELA propeller
1 x 28x10 BIELA propeller
1 x Propeller MENZ-S 21x10
1 x Propeller MENZ-S 18x8
1 x Propeller FALCON 27x10 3-BL carbono-gas
1 x Propeller MENZ-S 15x8 3 blades
1 x FIALA Propeller 23x8
1 x FIALA Propeller 22x10
1 x Vess propeller 13x6 S
2 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x 24x10 BIELA Sport 3Bl propeller (3-blades)
1 x 17x10 BIELA propeller SCALE (3-blades)
1 x 22x12D BIELA 3Bl propeller (3-blades)
1 x 24x8 BIELA propeller
1 x 18x10 BIELA propeller
1 x 18x10 BIELA pusher propeller
1 x 26x12 BIELA 3Bl Pusher propeller
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x Propeller 9x4,7 SlowFlyer
1 x Propeller MENZ-S 19x8 3-Blades
1 x Propeller MENZ-S 16x6
1 x Propeller MENZ-S 20x6 Pusher
1 x Propeller MENZ-S 20x12
1 x Propeller MENZ-S 19x12
1 x Propeller MENZ-S 16x8 3-Blades
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Propeller MENZ-S 15x10
1 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 19x10
1 x FALCON 25X9 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 20x8 Pusher
1 x Propeller MENZ-S 16x8
1 x Propeller MENZ-S 21x8 3-Blades
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x Propeller FALCON 5-BL 24x23.5
1 x FALCON 28X10 CARBON PROPELLER (GAS)
1 x Propeller 11x4,7 SlowFlyer
1 x FALCON 28X11 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 20x10 3 blades
1 x Propeller 3x3
1 x FALCON 33X11W CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 16x12
1 x Propeller MENZ-S 16x6 3-Blades
1 x FALCON 26X10 CARBON PROPELLER (GAS)
1 x Propeller 3x2
1 x Propeller 8x4,3 SlowFlyer
1 x Propeller MENZ-S 16x10 3-Blades
1 x Propeller MENZ-S 21x8
1 x Propeller MENZ-S 20x10
1 x Propeller MENZ-S 17x10
1 x Propeller MENZ-S 17x6
1 x Propeller MENZ-S 18x8 3-Blades
1 x Propeller MENZ-S 20x6
1 x Propeller 8x4 Electric
1 x Propeller MENZ-S 15x12
1 x Propeller MENZ-S 20x12 3 blades
1 x FIALA Propeller 16x6
1 x FIALA Propeller 28x10
1 x FIALA Propeller 27x10
1 x FIALA Propeller 23x10
1 x FIALA Propeller 18x10
1 x FIALA Propeller 24x8
1 x Propeller VESS 32A
1 x Vess propeller 12x7 S
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x BOEING 727, Electric brake 28mm + controller
1 x BOEING 727, Jet pipe for Boeing 727
1 x BOEING 727 kit
1 x Moki Exhaust Bend 200 mm
2 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x Motor Moki 100 BVT
1 x Fox 4000 mm Airworld,canopy frame
1 x ZENOAH ZG 26SC with magneto ignition
1 x ASK 21 6.8m
1 x DINO Glider ARC
1 x Motor MOKI S 350 cc 7 cylinder
1 x Moki Carburetor Throttle Arm with Extension
1 x ASW 15 5000 mm (Airwold)
1 x Kobuz 5000 mm (Airwold)
1 x Motor Moki 180
2 x IMPULSE 2 F3F
1 x BABY glider (Aero-naut)
1 x Birch plywood plate 600x300x4.0 mm
1 x Pilot "Dick" Legends Series (Slimline)
1 x 2 mm Prop Adapter M5
1 x Couple M4 for wire (10 pcs)
1 x 2,3 mm Prop Drive Günther M4
1 x Motor support DLE 30 (1 pcs)
1 x Escape DLE-60 Dcha
1 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x 8x6 tree blades propeller
1 x CILINDER FOR DLE 55RA
1 x DA-50 Carburator
1 x Gasket, cylinder ZG 20
1 x L ELBOW 90º ø 25 mm
1 x Modulo reglaje avance V3
1 x 3.2 mm Prop Adapter M8
1 x CDI EME 55/60 cc
1 x Piloto Jet "Red" 1/6 Scale
1 x Pilot "Duke" Legends Series (Slimline)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Beech dowels 4.0 x 1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Adapter 3,0 mm M8
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Muffler DLE 20
1 x Birch plywood plate 600x300x4.0 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x Lense for Spotlights, 20mm
1 x Regulador Jeti Jes 045
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x Lite Plywood panel 600x300x3.0 mm
1 x Plastic intake RAM tube for ZG 20 and 26
1 x Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x Adapter 3,0 mm M6
1 x Spark plug capZG 20/ZG 26EI with HT lead
1 x Spring Clip 16 mm teflon tube
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Motor EME 70 cc with autostarter
1 x Spring Clip 25 mm teflon tube
1 x PHASOR RACE 2035/2100 2D
1 x Fixing Ring with Base 40 mm
1 x 3,2 mm Prop Adapter M6
1 x Filetro gasoline filter Tillotson OW497
1 x Dia. 25x5 mm tefon tube for escape
1 x Birch plywood plate 600x300x3.0 mm
1 x 90° TUBE-ANGLE Ø 25 mm
1 x Actro 32-3 Heli MAX 5mm
1 x Blind nut M6 (4 pcs)
1 x 4 mm Prop Adapter M8
1 x 2,3 mm Prop Adapter M6
1 x UMS radial-engine, 7 cylinder 90ccm, gas
1 x Gasoline filter
1 x CDI EME 120cc
39,861.77EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies