419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
2 x SIMtransmitter 6 Mode 2
1 x Interface Realflight Simulator
1 x Slave-cable USB Easy Sim
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x RF9 Flight Simulator with Spektrum Controller
2 x GameCommander USB Universal
2 x 5 LiPo XH>EH adapter
1 x BEC 3A FOXY
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x APM2.6 Power module with 5.3V DC BEC
2 x Cabel charger transmitter GRAUPNER
1 x JETImodel SINGLE BEC
2 x CC 03
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Circlick securite
3 x TP/TopFuel - XH 2/3S Adapter
1 x Adapter lead MPX/XT60
2 x MPX-Dean "T" Adapter
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x 4 LiPo XH>EH adapter
1 x Dean "T" - Futaba Adapter
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x TP/TopFuel - JST-EH 4/5S Adapter
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x 30 cm BEC cable (male)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x USB HLS prog. interface
1 x Parachute PV6 for F3J
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Wing OXY 5,0 m2
1 x Opale Rucksack
2 x Rescue 1,8m2 / BackPack
1 x Set cintas unión paracaídas 145 cm
1 x LUCAS pilot ARTF
1 x Connectors banna oro 4 mm (M/F)
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Joint with bearing M2 22x5,5
1 x ABS tube 12.0x10.0x1000 mm
1 x Digital precision scale up to 2000 g
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Small Crow DLE-170M
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x DG-303 ACRO 3750 mm (Airworld)
1 x Escape Krumscheid 81-6 hasta 55 cc
1 x Moki Exhaust Bend 200 mm
3 x Piñon motor autostarter 60cc
1 x Motor DLE 20 RA cc
2 x One Way bearing for EME55 starkit with key
1 x Canister combo DLE 111 cc
1 x DG-303 ACRO 3750 mm, canopy
1 x Motor Moki S 250 cc 5 cyl with autostarter
1 x Fox 4000 mm (Airwold)
1 x Giant Scale Muffler D.A. 70 (2pcs)
2 x Light semi-synthetic Oil PUTOLINE TT (1l)
1 x Carbon plate 350x150x1.0 mm
1 x Stainless Steel Bend D 15x0,4mm
2 x Motor EME 35 cc with electric starter
1 x Motor DLE 40 cc Twin
1 x Fox 4000 mm Airworld,canopy frame
1 x Stainless Steel S-Bend D25x0,5mm
3 x Motor EME 35 cc
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Stainless Steel Silencer side outlet for ZG 20/23/26
1 x Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x DLE 85/111/120 Crankshaft keyway
3 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Actuador lineal HLS12-100210-7.4v
1 x DLE Ignition 111/120/170
1 x Motor DA 85
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x 2 LiPo XH>EH adapter
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x CC 05
1 x ESC ALPHA 60A HV
1 x AXI 2204 Multicopter
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x Motor 2212 (1000KV) Quadcopter F450
2 x CC 02
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x DPS Switch JR/JR
1 x Connector CAN 15
1 x 3 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
1 x 10-15mm Servo Arm HITEC
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x DPSI magnetic switch actuator (housing)
1 x CC 01
1 x CM-3
1 x 30 cm BEC cable (female)
2 x TrainerCord (master-learner)
2 x Cabling for Fox MDM1 wings
1 x Interruptor RX/Batterie
1 x Extension 5 lipos JST/C
1 x Female connector for 10 pines AWG
1 x Male connector for 20 pines AWG
2 x Female connector for 12 pines AWG
1 x Extension 2/3 lipos JST/C
1 x Double conector with JR adapter and 200 mm extension
2 x Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x Green smoke canister 140 g
4 x Windsock Ozone L - 700 mm
1 x Regulador Actro-Marine 60A
2 x Electric rocket starters (6 pcs)
1 x Para-RC Mix
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor Trike XL
1 x Initior Transmitter FTX2 Wireless
1 x Black smoke bombs AX-60 (5 pcs)
2 x BOX-Setup Actro-marine
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Smoke Oil Blue 5 l
2 x Piston EME 35cc
2 x Pitts Mufflers EME 35 cc
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Battery LiFe -3000/25C-3S 9.9V
1 x Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D
2 x Turbine KINGTECH K160 G4
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x Fixing Ring with Base 60 mm
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Piston for ZG22 / ZG23 / G2D70
2 x Turbine KINGTECH K100 G4
2 x KingTech Turbineoil 1L
1 x Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260
1 x 15 cm PTFE-tubing for 25 mm tubes
1 x Aceite DELUXE turbine Jet Oil 1 litro
2 x CDI EME 120cc
1 x Selfstarr EME35
1 x Propeller pad and output shaft EME 55/60 cc
1 x Piñon motor autostarter 35cc
2 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Motor EME 70 cc
1 x Motor EME 60 cc with electric starter
1 x Motor EME 60 cc
1 x Motor EME 70 cc with autostarter
1 x Pitts Mufflers EME 70 cc (2 pcs)
1 x Pitts Mufflers EME 55/60 cc
1 x EME ignition free wheel
1 x METEOR 1.000 mm kit
1 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Universal Colour Paste deep black 50 g
1 x Bomba KP500V Kingtech
2 x Filter KingTech
1 x Universal Colour Paste white 50 g
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
2 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Universal Colour Paste deep black 250 g
1 x Glass fibre sleeve Ø 20 mm
1 x Stainess steel exhaust flange for ZG20 / ZG22 / ZG23/ ZG26 / G23
1 x Intake tube ZG 74/80, DA85, VM 170-420 with special screws
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Cotton Flocks, bag/ 500 g
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x DA-50 Carburator
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Extra long Prop Bolt for ZG 45/62/74/80, with M5 threaded hole
1 x Chopped glass fibre strands 3 mm
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Piston for ZG 20
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Rocket cardboard tube 50mm x 48mm x 250mm
1 x Plug cap with spring for ZG 38/S/SC
1 x Stainless Steel Mini Pipe for Titan ZG 20 and ZG 23
1 x OS 40-FG 4T Motor
1 x Epoxy 5 min. 500 g (Resin)
2 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x HITEC Power Supply 30A. Max. 540w
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x 45 mm white plastic spinner for folding propeller
1 x CN-Spinner propeller pleg. 36 mm / 6 mm
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x KIRA 400-39 5,2:1
1 x KIRA 400-27
1 x Epoxy MID-CURE™ 15 min (130g)
1 x PSC 5
1 x SBEC Jeti
1 x Opto Gas Engine Kill Switch
1 x Red smoke canister 65 g
1 x Spinner propeller pleg. 30 mm / 2,3 mm
1 x Central piece 42 mm - 2,5º
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Central piece 42 mm 0º
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x entral piece 3Bl 42 mm 0º
1 x Spinner 3BL propeller pleg. 36 mm / 4,0 mm
1 x Spinner propeller pleg. 30 mm / 4,0 mm
1 x T-Motor U7-V2.0 Kv420
1 x QUANTUM II 55 Brushless Motor
1 x Cyanocrylate MD GA460 odourless 20g
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Extension 6 lipos XH > EH
1 x Male Prolonger TP 4/5S
1 x Female connector for 20 pines AWG
1 x PIX Hawk with accesories
1 x KIRA 600-20
1 x PYRO 600-12
1 x Radial mount for electric 2.5-5.6
1 x Motor MVVS 2.0/1120
1 x KIRA 480-43
1 x KIRA 600-38 6,7:1
1 x USB Interface Adapter
1 x A50 Motor Mount Alu complete set
1 x Debonder UN - CURE™ (30g)
1 x Cyano INSTA - CURE™ (56g)
1 x SPARK Switch 12v
1 x SPARK Switch 5.9v
1 x PWC4 wing/fuselage connector for 4 servos
1 x Multi-adapter balancer JST - TP
1 x PowerBox SparkSwitch RS
1 x USB interface ALTIS
1 x AX-60 starters (5 pcs)
1 x Green smoke canister 65 g
2 x Motor RACE 20 Navy 12v
2 x ROOKIE 20Amp (25) A controller
2 x Race Outboard MERCURY type A
1 x Motor ACTRO 28-4-880
2 x Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Turbine KingTech K30G Restart
1 x FOD Screen K140G/K180G/K210G
1 x OS GT15 W/E-4040 for airplane
1 x KingTech T-Modul 5 in 1 Telemetry
2 x Turbine KINGTECH K85 G4
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Battery LiFe -3800/25C-3S 9.9V
1 x Turbina KINGTECH K260 G5
1 x Motor ACTRO 50-2-760
1 x Regulador Actro-Marine 80A
1 x Motor ACTRO 35-4-790
2 x ESC Actro-Marine 30A
1 x Aqua RACE 70 (without motor)
1 x Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x Rocket D9-7
1 x EDF Jet-Flex 80 - 8 kg
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Regulador NAVY 540R
1 x Fueraborda RETRO
1 x Reguladro ACTROCON 60A
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Rocket D3-P
1 x Foaming agent for epoxy resins 200 g
1 x Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x JETFAN JF80 + motor HET 700-68-2100 Kv
48,456.95EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies