419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Servo DITEX TD2612S
1 x SERVO DES 806 Pignons
1 x SERVO DES 588 BB MG
1 x SERVO DES 568 MG
1 x Servo DITEX EL0510M
1 x SERVO DES 658 BB MG
3 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
2 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x SSPS105 Super Hi-Power servo
1 x Ferrita 14x8x5.5 mm
2 x PS-050 TONEGAWA Servo
2 x Ferrita 17x10x6.5 mm
1 x 
1 x Plasti Dip Liquid Tape 429 ml orange
1 x 20 g tin paste
1 x Spray YELLOW Inca Lexan 150ml
1 x Ball Link Plier
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x Hot Glue Stick BLACK
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Z Bender - S Type Tool
1 x ABS angle 2,0x2,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Hexagonal ball head 2.0 x 50 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Starter 12v (Max 180 and 30ccm)
1 x Starter 12v (Max 90 and 15ccm)
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x L-Connector 1.0 mm x 1000 mm
1 x Starter Sullivan-STAR 603 DINATRON
1 x 
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Copier 2x20 cm pcs
3 x Extractor piñones 2.3/3.2 mm
1 x XH female balance (2S) connector (2 pcs)
2 x Gold antispark 5,5 mm plug
1 x Connector CAN 15
1 x Conector BEC male (10 pcs)
1 x Connectors DEANS 4 pins (1 pair)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 8,0 mm (M/F)
1 x 2 mm female connector (2 pcs) with safety connector
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x XH male balance (5S) connector (2 pcs)
2 x XH female balance (3S) connector (2 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x MPX Sub-D Adaptor
1 x Connectors banna oro 0,8 mm (M/F)
1 x XH male balance (3S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x Connectors banna oro 4 mm (M/F)
1 x Optotronix Aurora Plug
2 x Xoar Electric Beechwood Prop 21x10
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Servo MKS 6100 DS
1 x Aluminium wide washer M3 gold (4 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
3 x Soporte servo KST X08/H and Plus
2 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Flybar support metal LAMA
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Soporte metal para servos
1 x Servo HBS 690BB HV Digital
1 x Crystal Universal RX 35.030 Ch 63
1 x Connectors banna oro 2 mm (M/F)
1 x SERVO DES 707 BB MG, Pignons
1 x Crimping tool
1 x EC-Cutter
1 x Dremel PERMAGRIT thin lime
1 x Digital weight, angle and balance meter BASIC
2 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x Ball Link Plier
1 x Z Bender - S Type Tool
1 x Jeti Black cap
2 x Servo KST X15-1208 V8.0 13.5Kg HV
2 x Xoar Electric Beechwood Prop 22x10
2 x Servo Robbe FS 128 BB MG HV Digital
2 x Servo Robbe FS 525 BB MG HV
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x 2,0x50 mm allen screwdriver
1 x Crimping tool
1 x Screwdriver for Hexagon 1,5mm
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Digital scale up to 40 kg
1 x Dust collector for mould cleaning
1 x 2,5x60 mm allen screwdriver
1 x Starter EM Gear Power 250
1 x XH female balance (9S) connector (2 pcs)
2 x Wing conexion 2 servos Futaba 50 cm
1 x XT-30 connector (pair)
1 x XH female balance (6S) connector (2 pcs)
1 x Servo HITEC D645 MW
1 x Servo HITEC HS-325 BB
1 x Servo HITEC D85 MG
1 x Servo HITEC HS-5085 MG Digi
1 x Servo HS-5565MH High Voltage
1 x Servo HITEC HS-225 BB
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Vest clothes Hispano Aviación
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x BlueCom™ Adapter (iOS)
1 x External LED's (2 pcs)
1 x Cable set Premium™ MAXI "one4two"
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Xoar Electric Beechwood Prop 12x6
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x Servo ROBBE FS-31 Pico Servo
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Schul-Malpinsel Gr.5
1 x Hot Glue Stick GREEN
1 x XH LiPo extension lead
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Propeller POWER-PROP 7x7
1 x Cap Hispano Aviación
1 x Shirt Hispano Aviación
1 x Softshell Hispano Aviación
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x 2 piece mounting frame
1 x Dean "T" - Futaba Adapter
1 x Antenna Hole Cap V1 (Silver)
1 x Xoar Electric Beechwood Prop 20x10
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Xoar Electric Beechwood Prop 16x7
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Xoar Electric Beechwood Prop 24x8
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Actro 32-3 Heli MAX 5mm
1 x Servo KST X08 Plus 9g HV servo
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Soporte servo KST X10 mini / DS135MG
1 x Sealing Iron Sleeve PROF
1 x ESC RAY G2 R-20B BEC
1 x PIN Connector female (100 pcs)
1 x Conector JR Servo female (50 pcs)
1 x Piston EME 35cc
1 x 15 mm gas motor standoff
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Motor UMS Radial-5-125cc gas
1 x Gasket, insulator ZG 20
1 x 7 mm gas motor standoff
1 x DLE 111 Old Crankshaft keyway
1 x Carburetor DLE 170
1 x DLE 55-RA Muffler
1 x Motor DLE 20 RA cc
1 x Rear bearing for motor 35/40 cc
1 x MVVS exhaust gasket 26cc
1 x Canister combo DLE 111 cc
1 x DLE 111 Carb gasket (V1)
1 x Piston ring for DLE-20
1 x Escape DLE-60 Izda
1 x DLE-55RA Ignition unit
1 x Conector JAPAN G2 Set 5 pares
1 x 35 mm gas motor standoff
1 x Dia. 20x15 mm teflon tube for escape
1 x 180° TUBE-ANGLE Ø 25 mm
1 x Stainless Steel Bend D 20x0,6mm
1 x Canister combo DLE 55 cc
1 x D.A. Fueling Valve
1 x CDI EME 120cc
1 x Silencer kit ZG 45/62
1 x Motor EME 60 cc with electric starter
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Crankcase Gasket set for ZG 74 / ZG 80
1 x 
1 x Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x SUPER CUB 2640 mm
11,878.96EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies