419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x Crimpadora
1 x Destornillador allen 3,0x60 mm molibdeno
1 x Arrancador EM Gear Power 80
1 x Arrancador Sullivan-STAR 601
2 x Arrancador Sullivan-STAR 603 DINATRON
2 x Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x Varilla acero Ø 2,5 mm x 1000 mm
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Varilla acero Ø 5,0 mm x 1000 mm
1 x Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x Varilla latón Ø 1,5 mm x 1000 mm
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Varilla acero Ø 1,5 mm x 1000 mm
1 x Varilla acero Ø 1,0 mm x 1000 mm
2 x Varilla acero Ø 7,0 mm x 1000 mm
2 x Servo NARO Max Std
2 x Varilla latón Ø 1,0 mm x 1000 mm
2 x Pegatinas números para marcar
1 x Varilla acero Ø 4,0 mm x 1000 mm
1 x e-Looger V3
2 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Varilla acero Ø 0,5 mm x 1000 mm
2 x Varilla acero Ø 8,0 mm x 1000 mm
1 x Varilla acero roscada M3 -1m
1 x Varilla acero Ø 3,0 mm x 1000 mm
1 x Vela OXY 0,5 pulgadas2
1 x Varilla ABS 4,0x1000 mm
2 x Oracover ROYAL RED 2m
1 x Cable acero trenzado Ø 0,62 mm (10 m)
1 x Ahesivo en spray AEROFIX 2
1 x Brazo direccional 16 mm Ø 4 mm
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Cable con accesorios
1 x Cinta fibra vidrio 38 mm
1 x GPS Sensor + Logger OPTronics
1 x Cable USB CORTEX DEMON Bavarian
1 x PowerBox MagSensor conector rojo
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x PowerBox Amplificador Servos
1 x Power Box GPS Sensor III
1 x PowerBox DigiSwitch V2 JR/JR
2 x Varilla acero Ø 1,5 mm x 1500 mm
1 x Destornillador allen 2,5x60 mm molibdeno
1 x Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x Conector Servo hembra 4 pines
1 x Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x Rótula MAXI sin bola M3 (2 uds)
1 x Rótula con rodamiento M2 22x5,5
1 x Canal de ABS de 3,0x6,0x1000 mm
1 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Varilla latón hexagonal Ø 3.5 mm x 1000 mm
2 x Bateria arranque incl. compresor inflado
1 x Ciano KAVAN Thin 20g
1 x Bisagra pin 39x20 mm (10 uds)
1 x Aceite rodamientos 25 ml
1 x Conector MR-60 (pareja)
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x BETA 1400 ARF Red
1 x Ball link M2 (10 pcs)
1 x Bancada para motores .09 - .19
1 x Cono 40 mm plastico negro (Kavan)
1 x Activador CA 150 ml
1 x Combustible Glow 4T "KAVAN" air/heli 15% nitro
1 x Combustible KAVAN CAR 25% 1 litro
1 x Bisagra papel lite CA (12 uds)
1 x Cargador SKY RC T400Q Charger 4x100w
1 x BETA 1400 RTF Red
1 x Cargador SKY RC e680
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Bisagra pin 34x16 mm (10 uds)
1 x Ciano KAVAN Super Thin 20g
1 x Chispometro con cargador
1 x Biberon 500 ccm Glow
1 x Conector XT60 macho empotrar (2 pcs)
1 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Conector universal carga chispometro
1 x Bomba electrica Fuel 12v
1 x Bateria LiPo GRE18 600 mAh 7.4v
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Bisagra pin 26x11 mm (10 uds)
1 x Adaptadores carga 6s JST-XH
1 x Conector equilibrado XH (2S) hembra (2 pcs)
1 x Rótula larga M3 con bola/tornillo (6 uds)
1 x Rueda FEMA 82 mm / 5 mm
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Plancha para entelar
1 x Rueda CUB DUBRO 1/3 Scale (558TLC) 2 pcs
1 x Neumático Ø 75 mm (1 ud) Electron Retracts
1 x Rueda FEMA 165 mm / 8 mm
1 x Soporte aluminio para encendido (azul)
1 x Sistema cierre negro doble cara 20x1000 mm
1 x Motor DA 70 Boxer
1 x Codo escape Diam. 18 mm x 0.5 mm
1 x Arandela conica alumino M3 azul (8 pcs)
1 x Escape Pitts en kit para CAP 21
1 x Soporte trasero 35 mm para motor gasolina
1 x Unidad EVP para AXI2208/xx y 2212/xx
1 x Canal de ABS de 5,0x10,0x1000 mm
1 x Accesorios La Capitania di Venetia
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Molde conector XT-60
1 x Perforador hélices DA-35/50/60/70
1 x Rueda espuma Ø 60mm x 21 mm (2pcs) eje Ø 4.0mm
1 x Rueda espuma Ø 55mm x 19 mm (2pcs) eje Ø 3.5mm
1 x Rueda de foam Ø 38 mm (2 pcs)
1 x Arandela conica ancha alumino M4 Azul (4 pcs)
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Codo escape 90º ø 25 mm
1 x Taco goma 11 mm (14 pcs)
1 x Captador Encendido RCEXL Universal
1 x Canister combo DLE 120cc
1 x Ball link aluminio M3 V1 azul (10 pcs)
5,879.82EUR
Fabricantes
Información del Fabricante
O.S.
O.S. Página Principal
Otros productos
Idiomas
Español English
Monedas