419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Strip 1,5x1,5x330 mm
3 x Round Rod 1,25x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
3 x Strip 2,5x1,25x330 mm
3 x Round Rod 5,0x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
2 x Round Rod 2,0x1000 mm
2 x ABS Strip 1.0x2.0x1000 mm
2 x Strip 2,0x2,0x330 mm
3 x ABS Strip 1.5x4.0x1000 mm
2 x ABS I Strip 10x5x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 1,0x1000 mm
2 x Strip 3,5x1,75x330 mm
2 x Round Rod 4,0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x ABS tube 3.0x2.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
2 x ABS tube 16.0x14.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x Plasti Dip Liquid Tape 429 ml black
2 x Plasti Dip Liquid Tape 429 ml black
1 x Painting GHT Lexan Black 150 ml
1 x Spray EC Red 400ml
1 x 1000 ml sealer (DOPE)
1 x Release wax 250ml
2 x Spannlack 1000 ml
1 x Spray YELLOW Inca Lexan 150ml
1 x Spray Graphit 33
1 x PARTALL® Hi-Temp Wax, 340 g
2 x Universal Colour Paste deep black 250 g
1 x Universal Colour Paste deep black 50 g
1 x Nitroverdu 500 ml
1 x Hobbylite Filler, Balsa colour
1 x 500 ml sealer (DOPE)
1 x 
1 x Solvent Plasti Dip 1000 ml
3 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Strip ABS 2.0x3.0x1000 mm
2 x Round Rod 6,0x1000 mm
2 x ABS I Strip 20x10x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Surface Indicator Gauge Small
1 x Joint with bearing M3 22x5,5
1 x Blind nut M6 (4 pcs)
1 x JETImodel SINGLE BEC
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Fixed launching hook
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x 
1 x Futaba male 40 cm extension
1 x ABS tube 7.0x6.0x1000 mm
1 x Q-12 2000 mm Electric
2 x Mini DART 2 F3K carbon light 1m Green
1 x Swift ARF 2000 mm Red (Hacker Model)
3 x X-RAY Micro QR (Tail Tube)
1 x TAKEO 3.6m electric
1 x Canopy Astra
1 x Glider IKARUS
1 x 250 mm / 16 mm Airbrakes
1 x X-RAY Micro QR (Rudder)
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Socket Head Screw M2x10
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Screw M4x12 (10 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Screw M2.5x20 (10 pcs)
1 x OS 40-FG 4T Motor
1 x 50N turbine start protection tube
1 x Spray adhesive AEROFIX 2
2 x Paint gun for sprays
1 x Kobuz 5000 mm (Airwold)
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Engine mounts for .09 - .19 engine
2 x X-RAY Micro QR (Elevator)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Baffles for Radial Moki S250/330 mm
1 x Fox 4000 mm (Airwold)
1 x Moki Carburetor Throttle Arm with Extension
1 x DG-303 ACRO 3750 mm (Airworld)
1 x ABS tube 9.0x8.0x1000 mm
1 x Motor OS 55 AX
1 x Motor OS MAX 120 AX
1 x OS Engine 105HZ-R Heli
1 x Motor OS FS-62V 4T
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x Motor OS MAX 160 AX
1 x Motor OS FS 75 AX
1 x Motor OS 15 LA
1 x Motor OS FS 95 AX
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Glow/Gas/Smoke/Kerosene filter
1 x Glow filter
1 x X-RAY Micro QR
1 x BABY glider (Aero-naut)
1 x Glider KNIRPS
1 x Glider PIROL
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x APM2.6 Power module with 5.3V DC BEC
20,409.97EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies