419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Gates hinge
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x 18 mm reinforced hinge
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 25 mm reinforced hinge
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Large flex hinge (12 uds)
1 x Indoor hinge with servo arm integraded
1 x 15 mm reinforced hinge
1 x Medium pin type hinge (12 uds)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin hinge 26x11 mm (10 uds)
1 x Long pinned hinge (12 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Flap hinge (6 pcs)
1 x Long pinned hinge (6 uds)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Steering arm 12 mm Ø 4 mm
1 x Cabin latch Fox MDM1 4m (pair)
1 x Canopy Latch
1 x Locking cable tie 4.6x203 (uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Cockpit plastic closing
1 x Electric spoiler 250 mm (2 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Optical RPM Sensor
1 x DYNAMOMETER S-1580
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Profile ABS Square 2 x 1000 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Round flex hinge (12 uds)
2 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Xplorer3 anemometro
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Universal Colour Paste deep black 50 g
1 x PARTALL® Hi-Temp Wax, 340 g
1 x 250 mm / 16 mm Airbrakes
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x BU 131 Jugmann Panel Instrum. frontal
1 x Vasa model Catapult
1 x Rocket D3-P
1 x Motor OS 3820-1200 electric
1 x Autogyro Cierva C30 Spain
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Aceite SHELL 560 Turbina 0.9Kg
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Allen wheel collar M4x4
1 x 41x5,5 mm wires output (2 pcs)
1 x Pushrod octagone 4/3
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Landing gear frontal support 29x26x13,5
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Pushrod greyline 4/3 with coupler M3
1 x Wheel collar 6 mm Ø (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x FOD Screen K45/60/70/85
1 x Clamp K30 G3
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x Aceite turbina JetsMunt 1 litro
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Cockpit latch closing I=10 mm
1 x Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x Rear cover O-ring 26/30 cc
1 x Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Wheel collar 3 mm Ø (4 uds)
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x Pushrod octagone 3/2
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Allen wheel collar M3x3
1 x Pushrod octagone 3/2 with coupler M2
1 x Allen wheel collar M4x6
1 x Wheel collar 5 mm Ø (4 uds)
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Allen wheel collar M3x5
1 x Pushrod greyline 3/2 with coupler M2
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Cable tie mounts 4.3 (4 uds)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Tip wing protector 30x10 (2 pcs)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Scale exhaust K45TP
1 x Filter KingTech
1 x CDI EME 120cc
3,692.32EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies