419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Aluminium sheet 500x250x0,5mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x Buy Perforated film 145 cm / 50 m
3 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x Carbon fibre sandwich sheet 350x150x3 mm
2 x ABS 500 x 400 x 0,5 mm (white)
1 x ABS 500 x 400 x 1 mm (white)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x Carbon fibre sleeve 12k 170 mm x 5m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Ferrita 27x14x7 mm
1 x Ferrita 14x8x5.5 mm
1 x Bungee HLG Premium
2 x Vasa model Catapult
1 x Carbon plate 350x150x2.0 mm
1 x Carbon plate 350x150x1.5 mm
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x Fiberglass plate 350x150x2.5 mm
1 x Styrene plate 320x120x0.5 mm
1 x Styrene plate 320x120x1.0 mm
1 x Carbon plate 350x150x4.0 mm
1 x Carbon plate 350x150x2.5 mm
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Foam plastic plates (310x210x8 mm)
1 x Fiberglass plate 350x150x0.5 mm
1 x Carbon plate 350x150x1.0 mm
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Carbon plate 350x150x5.0 mm
1 x Fiberglass plate 350x150x2.0 mm
1 x Carbon plate 500x400x2.0 mm ISOTECH
1 x PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x Glass fabric 425 g/m² aero,10x1m
2 x Buy Perforated film 100 cm / 20 m
2 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
2 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
3 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
2 x Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x Sheet Depron Aero 1250x800x3 mm
2 x Colormatic 2K Soft fine putty white, 1 kg
2 x Buy Perforated film 100 cm / 50 m
1 x Glass fabric 390 g/m² aero,10x1m
2 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Piloto Jet "Green" 1/6 Scale
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Allen wheel collar M3x5
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Motor KAVAN PRO 2225-1600
1 x MultiLog Altimeter
3 x Telemetry interface ALTIS 20 cm
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Glass fabric 49 g/m² (1,27 x 10 m)
2 x Glass fibre sleeve Ø 20 mm
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x Glass fibre braided sleeve (45mm) roll 20m
2 x SCHARNHORST Battleship 1:200
1 x Electronic fog horn
1 x SCHARNHORST accessories
1 x Motor ACTRO 35-4-790
1 x Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x Motor ACTRO 28-4-880
1 x Catalog AERO-NAUT 2016
1 x Reguladro ACTROCON 60A
1 x BOX-Setup Actro-marine
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x resin-hardener L-385 H-385 (1250 g)
1 x Glass fibre braided sleeve (45mm) roll 10m
1 x Fiberglass 5000x1100 mm 49 g/m²
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x AXI 2820/12 V2
1 x AXI 2217/16 V2 Long
1 x AXI 2217/20 V2
1 x PHASOR RACE 2035/2100 2D
1 x Telemetry interface ALTIS 12 cm
1 x AXI 2808/24 V2
1 x AXI 2808/16 V2 Long
1 x AXI 2826/12 V2 Long
1 x AXI 2217/12 V2
1 x AXI 2212/20 V2
1 x AXI 2217/20 V2 Long "F5J"
1 x AXI 2814/10 V2 Long
1 x AXI 2814/12 V2 Long
1 x AXI 2814/16 V2
1 x AXI 2808/24 V2 Long
1 x AXI 2814/20 V2
1 x AXI 2212/12 V2
1 x AXI 2820/8 V2 Long
1 x AXI 2820/14 V2
1 x AXI 2814/16 V2 Long
1 x AXI 4120/14 V2
1 x AXI 2820/10 V2 Long
1 x AXI 2814/20 V2 Long
1 x AXI 2217/16 V2
1 x AXI 2826/10 V2
1 x AXI 2212/26 V2
1 x AXI 2826/6 V2 Long
1 x AXI 2820/14 V2 Long
1 x AXI 2826/12 V2
1 x AXI 2826/6 V2
1 x Altimeter Altis V4
1 x EDGE 540-A 74" (1880 mm)
1 x GPS Altis
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x EXTRA NG 85" 2159mm red/white
1 x Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x EXTRA 300 78" V3 Orange/Blue
1 x EDGE 540-A 91" (2310 mm)
1 x Fiberglass plate 350x150x0.3 mm
1 x Fiberglass plate 350x150x4.0 mm
2 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x 290 mm M4 7/8x212 mm shaft ship
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Servo GO-1013 MG 3.8kg
1 x OS 40-FG 4T Motor
18,159.01EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies