419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]


Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x SE Ring 240 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x 20x200 mm battery rings
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Tape GFK 50 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Tape GFK 25 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 330 mm (4 pcs)
2 x Screw-lock connector Ø 2 mm (2 uds)
2 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Locking cable tie 3.2x142 (uds)
2 x Cap closure 33/23.5mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Red smoke canister 100 g
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Electromotor starter EME 35cc
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x GLOW 5C + accesories
1 x Selfstarr EME35
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Starter EM Gear Power 80
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x DLE 30 complete electronic ignition
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Motor Saito FG-90 R3, 90 cc
1 x Sensor Ignition RCEXL Universal
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x Tape GFK 38 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x Tip wing protector 40x14 (2 pcs)
2 x SUS wire 3m (nylon coated)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Locking cable tie 4.6x203 (uds)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Locking cable tie 2.5x100 (uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Screw-lock connector M2 (2 uds)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Motor MOKI S 350 cc 7 cylinder
1 x UMS radial-engine, 7 cylinder 90ccm, gas
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Canister combo DLE 55 cc
1 x Carburetor DLE 20
1 x Pick up for motor Moki 250 cc 7 cylinders
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x Carburetor for ZG45SL and ZG62/S/SL
1 x CDI EME 55/60 cc
10,629.59EUR
Manufacturers
Manufacturer Info
O.S.
O.S. Homepage
Other products
Languages
Español English
Currencies