1 x | USB Mini Camera endoscope |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
3 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Foreman, scale 1:32 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Charger LiPo Charger4 |
1 x | Propeller G-Sonic 20x8 |
1 x | Decorative caps, multicoloured, short |
1 x | MZ-12, 6 Channel HoTT |
1 x | Foam plastic plates (310x210x2 mm) |
3 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
3 x | Propeller Pleg CAM-Prop 8x6 |
3 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Receiver replacement antenna, approx. 85 |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Spikes Band (5 m) |
1 x | POLARON EX 800w charger |
1 x | Adjustable brass horn threaded M3 |
2 x | Coupling bush 5 - 5 mm |
2 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Decorative caps, multicoloured |
1 x | MZ-10, 5 Channel HoTT |
1 x | Receiver replacement antenna, approx. 15 |
1 x | BEC 3A FOXY |
1 x | CC 01 |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
4 x | Ferrita 14x8x5.5 mm |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | SCHARNHORST accessories |
2 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
3 x | 2 mm Prop Adapter M6 |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
3 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | MultiLog Altimeter |
2 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | CORTEX |
3 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | DC Small for MultiLog & UltraLight |
1 x | SC NAVY V15R |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | SERVO DES 588 BB MG |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Ply-Span 450x600/13g White |
1 x | Motor Mega AC 16/15/07 |
2 x | Motor Mega AC 22/30/02 |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Motor Mega AC 16/15/03 |
1 x | Spinner black 40-45mm |
2 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
3 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Motor Mega AC 16/07/03 |
3 x | Motor Mega AC 16/25/02 |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon 1 pair |
1 x | Propeller APC 14x10 Electric |
2 x | Propeller APC 10x4.7 SF |
2 x | CAM-Carbon Light Prop 8x4.5" (Prop left) |
1 x | Capstan of plastic 88x30x36 mm |
1 x | CAM-Carbon Light Prop 9x6" |
3 x | Ferrita con funda |
1 x | Porpeller HUNTER 400 |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Spinner black 36-38 mm |
1 x | Motor Mega AC 16/35/01 |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Spare white 38-45 mm spinner |
3 x | Motor Mega AC 16/10/03 RACE |
3 x | Motor Mega AC 16/15/05 CE F5J |
2 x | Motor Mega AC 16/15/08 |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
3 x | Motor KAVAN PRO 2225-1600 |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
2 x | Motor Mega AC 16/15/02 |
1 x | Motor Mega AC 16/20/02 |
1 x | Motor Mega AC 16/15/07 COMBAT |
2 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Motor Mega AC 16/30/01 |
2 x | Motor Mega AC 22/35 4S |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Ply-Span 450x600/13g Red |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Motor Mega AC 22/30/03 |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Motor Mega AC 16/07/08 |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Program card KAVAN PRO |
1 x | Schul-Malpinsel Gr.5 |
1 x | Motor Mega AC 16/25/06 |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Motor Mega AC 22/45/03 E |
1 x | Ply-Span 450x600/13g Black |
1 x | Support GFK propeller ple. 2Bl |
2 x | Motor Mega AC 16/25/04 |
1 x | Porpeller HUNTER 480 |
3 x | Motor Mega AC 16/07/06 |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
2 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Red spinner 40-45 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Motor Mega AC 16/15/04 COMBAT |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | Motor Mega AC 16/07/04 |
1 x | Spinner red 36-38 mm |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 12x8 Electric |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 12x6 Electric |
1 x | Propeller APC 13x4 Electric |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 10x3,8 SF |
1 x | Propeller APC 10x5 Electric |
1 x | CAM-Carbon Light Prop 9x5" PHANTOM (Prop right) |
1 x | Catalog AERO-NAUT 2016 |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Cancamo Ms 7 mm (50 pcs) |
1 x | Cancamo con aro 16/6.5 mm (10 pcs) |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Excentric gearbox for 2,0mm axis (4,1:1) |
1 x | DPSI RV Mini 6 (2008) |
1 x | DPSI magnetic switch actuator (PCB) |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | LS-8 GFK 6m Glider |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. trasero |
1 x | PARTENAVIA 2020 mm ARC with Flaps |
1 x | DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal |
1 x | STD excentric gearbox for 2,0mm axis (5,0:1) |
1 x | Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1) |
1 x | Excentric gearbox for 3,2mm axis (4,1:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
1 x | Combo lighting module with covering drop shape |
1 x | EWC6 40 cm wing connector |
1 x | DPSI LR-S (with push buttons) |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | DPSI Micro - RCS RV |
1 x | Emcotec SPS Magnetic Switch Actuator |
1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | DPS Switch JR/JR |
1 x | EWC3 100 cm wing connector |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Fuel Dot (Silver) |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Kardan Black (without pinions) |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Rigid coupling brass Ø 3 mm L: 20 mm |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | 290 mm M5 Prop shaft |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller) |
1 x | Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm |
1 x | G-Ring Ø3mm Ø3xØ6x3 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | 290x4 mm M4 shaft ship |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right) |
1 x | LO 100 ARC 3.3m |
1 x | BU 131 Jugmann Panel Instrum. trasero |
1 x | BU 131 Jugmann ARC |
1 x | Fiberglass motor-holder for electric motors |
1 x | 18 mm reinforced hinge |
1 x | 15 mm reinforced hinge |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Fiberglass motor-holder for electric motors |
1 x | BU 131 Jugmann Panel Instrum. frontal |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Neck strap JETI DC |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | Starter Sullivan-STAR 601 |
2 x | 3,2 mm Prop Adapter M6 |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | 3 mm Prop Adapter M6 |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Propeller Pleg CAM Carbon 10.5x6 |
1 x | Motor A50-12 L V4 |
2 x | Mega Motor RC 400 F5J 1950KV |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
1 x | Axle for motor A50-L |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | 12 mm portholes (10 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Propeller Pleg CAM Carbon 12x5 |
1 x | Motor A30-12 XL Glider |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | A40 Backmountset complete |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Spinner propeller pleg. 40 mm / 6,0 mm |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 21x14 Electric |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Anchor 80 mm (2 uds) |
1 x | 4 mm Prop Adapter M6 |
1 x | 5 mm Prop Adapter M6 |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Aero-Master (Aero-naut) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Railing Ø 2mm (20 pcs) |
1 x | Ancla metal 40 mm (2 uds) |
1 x | Motor Mega AC 16/25/03 |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
2 x | 3 mm Prop Adapter M6 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Motor A40-10S V4 14-Pole |
1 x | 12x8 tree blades propeller |
1 x | Motor A30-14 M V2 6 Poles |
1 x | 15x7 tree blades propeller LEFT |
1 x | 11x7 tree blades propeller |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | White spinner propeller pleg. 55 mm / 6 mm |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Propeller APC 19x12 WE Electric |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Spare white 30-36 mm spinner |
1 x | Propeller APC 16x12 Electric |
1 x | Propeller APC 13x8 Electric |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Propeller APC 14x12 Electric |
1 x | Anchor 25 mm (2 uds) |
1 x | 4 mm Prop Adapter M8 |
1 x | SCHARNHORST Battleship 1:200 |
1 x | La Capitania di Venetia accesories |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Hinges 7x12 mm (20 pcs) |
1 x | Bandera Frankr 4x6 |
1 x | BABY glider (Aero-naut) |
2 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 10 mm Prop Adapter M12 |
1 x | BABY glider drawings (Aero-naut) |
1 x | 5 mm Prop Adapter M8 |
1 x | Ancla 16 mm (2 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | 10x7 tree blades propeller |
1 x | 300x4 mm M4 shaft ship |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Propeller Pleg CAM Carbon 10x12 |
1 x | 14 mm portholes (10 pcs) |
1 x | Propeller Pleg CAM Carbon 15x10 |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | 1000 ml sealer (DOPE) |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Motor A200-6 |
1 x | Motor A30-10 XL V4 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Axle for motor A30-XL V2 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor A20-26 M EVO |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | A50 Backmountset complete V3/V4 |
1 x | A50 Backmountset complete |
1 x | Motor Mega AC 22/20/03 |
|
25,511.68EUR |