120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]


Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Support Flush MPX Conector (6 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
3 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 20 mm carbon horn
1 x M3 Maxi ball link (2 uds)
1 x Adapter lead MPX/EC3
1 x Spikes Band (5 m)
1 x Pilot "Adolf" Legends Series (Slimline)
1 x 5 line servos wire black (1 m)
1 x Horn mando small (2 pcs)
1 x Profile ABS half cane 6.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
2 x SE Ring 400 mm (2 pcs)
1 x Cable set Premium™ MAXI "one4two"
1 x 6 mm aluminium horn with patella
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cable grommet Ø 5 mm (4 uds)
1 x 2 LiPo XH>EH adapter
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Vasa model Catapult
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x DYNAMOMETER S-1580
1 x Short ball link M3 (6 uds)
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x 100 mm rods set for direction control
1 x Optical RPM Sensor
1 x Black silicone 0,25 mm² wire (25 m)
1 x Cabel charger transmitter GRAUPNER
1 x Cable coupler M2 (10 uds)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Cable coupler M2x66 (2 uds)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Support Filtro FESTO
1 x PIX Hawk with accesories
1 x Micro Tarjeta SD Rapid Rush 16 GB
2 x TX 250 mW especial GOPRO
2 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
2 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
3 x Program card KAVAN PRO
1 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x BD-5J ARF+
1 x PC-21 2.880 mm SINGAPUR scheme
1 x PC-21 XXL 3.395 mm
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x FELIX JR Red/Yellow 1750 mm
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x MB339 CAMUFLAGE PNP 1790 mm
1 x MIRAGE 2000 TIGER PNP
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x MB339 Saudi PNP
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Metal ring front FEMA
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
2 x Charger LiPo Charger4
1 x Connector CAN 15
1 x 20x200 mm battery rings
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x SE Ring 480 mm (2 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Soporte servo KST X08/H and Plus
1 x Tape GFK 50 mm
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
2 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x 1/6 Pilot "Buddy"
1 x 1/12 Pilot "Fighter"
1 x SE Ring 250 mm (2 pcs)
1 x Connector Sub-D 2+5 Female
1 x USB interface ALTIS
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x CC 03
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x SERVO HOLDER
1 x ASH 31 Mi Scale:1/3 - 7m
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x 1/6 Pilot "John"
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Extension 2/3 lipos JST - JST/C
1 x Circlick securite
1 x SE Ring 360 mm (2 pcs)
1 x TP/TopFuel - XH 2/3S Adapter
1 x 3 LiPo XH>EH adapter
1 x Extension 5 lipos JST - JST/C
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Xplorer1 anemometro
1 x Cable video GoPro and 5V cable
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
2 x 120x60 mm SLH KOVO wheel
1 x Cable video GoPro
30,427.26EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies