Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Transmitter FUTABA T26SZ + R7214SB
1,079.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
2 x	Joint with bearing M3 22x5,5
1 x	Socket head ball link M3 (2 uds)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Long ball link M1.6 (6 uds)
3 x	Joint with bearing M2 22x5,5
1 x	Short ball link M1.6 (6 uds)
2 x	Long ball link M2 (6 uds)
1 x	Short ball link M2 (6 uds)
2 x	Long ball link M3 (6 uds)
1 x	Ball link M2 (10 pcs)
3 x	Ball link M3 RPA's-UAV's
2 x	Socket head ball link M3 (2 uds)
2 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Socket head long ball link M3 (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
2 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
2 x	M2,5 5Diam black ball link V2 (2 pcs)
2 x	M3 Maxi ball link (2 uds)
2 x	M3 Maxi ball link (2 uds)
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
2 x	Ball link M3 (10 pcs)
2 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x	Ball link M3 (10 pcs, flat ball)
1 x	6 mm ball link M3 (10 pcs)
2 x	Ball link M3 (6 uds)
1 x	Motor DLE 430 cc - Paramotors
1 x	CC 02
1 x	1/6 Pilot "John"
1 x	Dust collector for mould cleaning
1 x	BALSA leading edge 8x10x1000 mm
1 x	Heat sink for Optotronix LEDs
1 x	Lense for Spotlights, 20mm
1 x	16mm Gear-Spotlight, 4W
1 x	Landing lights 18 mm (0.71in)
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
2 x	M2,5 Diam metal ball link V3 (2 pcs)
2 x	M3 Maxi ball link (2 uds)
2 x	Short ball link M3 (6 uds)
1 x	DPSI LR-S (with push buttons)
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
2 x	LED wire (white - 2pcs)
2 x	ED Position Lights wireless (Set of 3)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
2 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Propeller balancer
2 x	Field folding model stand
1 x	Propeller balancer
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle measurer
1 x	SkyMaxx 1.550 mm (kit)
1 x	Jodel D.9 BeBe 2.400 mm Kit
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	Small pinned hinge (12 uds)
2 x	Nylon hinge 15x0,3 (10 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	Tape GFK 38 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SUS wire 3m (nylon coated)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Screw-lock connector M2 (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	DPSI RV Mini 5 (2008)
1 x	Propeller 11x4,7 SlowFlyer
1 x	5 mm Prop Adapter M8
1 x	Propeller 9x7 SlowFlyer
1 x	Aero-Master (Aero-naut)
1 x	Servo SAVOX SA-1256 TG
1 x	Servo SAVOX SH 0257 MG
1 x	Servoarm Aluminium SH-82
2 x	Servo TOPMODEL STANDARD S3217
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	50x45 mm micro-mini servo cover
1 x	Savox Brushless Servo SB-2271SG
1 x	Servo TOPMODEL S7520 MG
1 x	Stick coupler Ms 15 mm
1 x	SCHARNHORST Battleship 1:200
1 x	4 mm Prop Adapter M6
2 x	Propeller 3x3
1 x	3,2 mm Prop Adapter M6
1 x	Dumper propeller 6/8 mm
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	Propeller 3x2
1 x	Propeller 9x4,7 SlowFlyer
2 x	3 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	Propeller 8x4 Electric
1 x	SCHARNHORST accessories
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	5 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	3.2 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Softshell Hispano Aviación
2 x	Vest clothes Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Servo SAVOX SV-1261 MG
1 x	Servo mounting frame SV-1260MG
1 x	Savox Brushless Servo SC-1251 MG
1 x	SAVOX SH 0254 servo
1 x	Servoarm SH-81, two sides, aluminium
1 x	90x60 mm standart servo cover
2 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Resistor 3W 5% OR82
3 x	SE Ring 360 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
3 x	Foil for sticking flaps and ailerons
1 x	LED wire (rojo - 2pcs)
3 x	Tape GFK 50 mm
1 x	Parachute XTRALITE S
1 x	Steering arm 16 mm Ø 3 mm
1 x	Resistor 3W 5% OR47
1 x	LED wire (orange - 2pcs)
1 x	LED blink wire flashing (white - 2pcs)
1 x	BABY glider (Aero-naut)
1 x	LED lighting system High Power
1 x	Glidder Mü13e (Bergfalke)
1 x	Round flex hinge (12 uds)
1 x	18 mm reinforced hinge
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Spikes Band (5 m)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	2 mm Prop Adapter M5
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	3 mm Long Prop Adapter M5
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 5,0 mm M8
1 x	Adapter 4,0 mm M6
1 x	Threaded coupler M3 (10 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Long pinned hinge (6 uds)
1 x	25 mm reinforced hinge
1 x	Medium pin type hinge (12 uds)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	HITEC Power Supply 30A. Max. 540w
2 x	Tape GFK 25 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x
1 x	SE Ring 200 mm (2 pcs)
2 x	Marker ties (20 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Profile ABS Square 3 x 1000 mm
2 x	Motor KAVAN PRO 2225-1600
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Cancamo Ms 7 mm (50 pcs)
1 x	Bocina Ms 18 mm (3 pcs)
1 x	290 mm 8x4 M4 shaft ship
1 x	Cable pass Ms 9x5 mm (10 pcs)
1 x	CAM-Carbon Light Prop 10x5" (Prop right))
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Capstan of plastic 88x30x36 mm
1 x	CAM-Carbon Light Prop 8x4.5" (Prop left)
1 x	CAM-Carbon Light Prop 13x5" (Prop right)
1 x	13 mm wing servo holder
1 x	18 mm wing servo holder
1 x	CAM-Carbon Light Prop 10x5" (Prop left)
1 x	Program card KAVAN PRO

11,686.80EUR