Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Jet Pipe for ULTIMATUM 2m
160.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Dean "T" - Futaba Adapter
4 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	Cabel charger transmitter GRAUPNER
2 x	APM2.6 Power module with 5.3V DC BEC
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Prolongador S-Bus JR/JR 10cm
1 x	2 LiPo XH>EH adapter
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 100 cm (Graupner)
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
2 x	Futaba Female 40 cm extension
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	CC 01
2 x	Extension silicon 30 cm female (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	MPX-Dean "T" Adapter
3 x	Extension 90 cm (Futaba)
2 x	30 cm BEC cable (male)
2 x	Adapter lead MPX/EC3
1 x	Extension 15 cm (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Premium servo extension 25cm
1 x	TrainerCord (master-learner)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
3 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Cabel "Y" 30 cm (graupner)
2 x	Extension silicon 35 cm male (Futaba)
1 x	USB HLS prog. interface
2 x	CC 02
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	200 mm extensión servo HITEC/JR
2 x	Cabel "Y" 15 cm
1 x	Extension silicon 100 cm (Futaba)
2 x	Extension silicon 30 cm male (Graupner)
2 x	BEC 3A FOXY
2 x	Circlick securite
2 x	CC 05
1 x	Extension lead 15 cm Multiplex
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	4 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Premium servo extension 100cm
1 x	Extension silicon 10 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Futaba Female 40 cm extension
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
2 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Slave-cable USB Easy Sim
1 x	2,0x50 mm allen screwdriver
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Servo NARO Max Std
1 x	FX three-position switched channel, long
2 x	Connector CAN 15
2 x	Actuador lineal HLS12-100210-7.4v
1 x	Male connector for 6 pines AWG
2 x	Blade Holder Full (4 blades)
1 x	Extension silicon 75 cm (Graupner)
1 x	PowerBox SparkSwitch RS
2 x	Interruptor SAFET-SWITCH 12HV Twinbatt
3 x	Multi-adapter balancer JST/C - TP
2 x	Nut M2 securing
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	PIX Hawk with accesories
1 x	Extension 7.5 cm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
2 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
3 x	Extension 5 lipos JST/C
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
2 x	Female connector for 12 pines AWG
2 x	Male connector JST SH 1.0mm with 10 cm wire
2 x	Nut M2
1 x	38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Opto Gas Engine Kill Switch
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
2 x	Screws M1,6x6 Allen
2 x	Female connector for 10 pines AWG
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Spinner INOVA 63 mm White
1 x	Head core
1 x	Cierva C30 simulated motor
2 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Nut M1,6
2 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Extension silicon 30 cm male (Futaba)
2 x	DPS Switch JR/JR
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Blade Holder (3 blades)
1 x	Male Prolonger TP 4/5S
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Electronic switch JETI SP06 Opto
2 x	Blade Holder Full (3 blades)
2 x	Fuselage Autogyro RAINBOW
1 x	Hacker X-Pro USB interface V2
1 x	EWC6 40 cm wing connector
1 x	Male connector for 12 pines AWG
1 x	Tail tube RAINBOW
2 x	Magnetic Interruptor MULTIPLEX
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	JETImodel Addcap 1640
1 x	Male connector for 16 pines AWG
1 x	Long Switch On/Off micro
1 x	Interruptor SPS 70v 60/120A
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Extension 6 lipos XH > EH
1 x	JETImodel DPS 40
1 x	JETImodel SINGLE BEC
1 x	EWC3 100 cm wing connector
1 x	Female connector for 16 pines AWG
1 x	Electronic switch JETI SP6 0-15v/6A
2 x	EWC3 40 cm wing connector
2 x	3 blades set
1 x	Extension 2/3 lipos JST - JST/C
2 x	Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x	Cierva C30 Body Spain
2 x	Opto Gas Engine Kill Switch
2 x	Spinner INO 70 mm Chrome (Imitacion metal)
1 x	F3A carbon 82 mm spinner for 12 mm axis
1 x	Balls 4 mm
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
3 x	45 mm white plastic spinner for fixed propeller / 4,0 mm axi
2 x	F3A carbon 95 mm spinner
1 x	Raer wall
3 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	Male connector for 10 pines AWG
2 x	Battery charging cable XT60
2 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	75 mm INO spinner (carbon imitation)
1 x	Blade holder upper
2 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Head runner
2 x	Bearing 3x6x2,5
1 x	Steering lever
1 x	89 mm INO spinner (carbon imitation)
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	Baering 3x8x4
1 x	Head lower part New
1 x	Cierva C30 Elevator
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Extension 5 lipos JST/C - JST
2 x	Spinner INO 75 mm Chrome (Imitacion metal)
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Head core bushing
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Complet landing gear
1 x	CM-3
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Blade holder center
2 x	70 mm INO spinner (carbon imitation)
1 x	Spinner 82mm Black ventilado
2 x	Double conector with JR adapter and 200 mm extension
1 x	Head lower part
1 x	Three-position switched channel, short
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Connector Sub-D 2+5 Male
1 x	Screws flush mount M2
1 x	Switc electronic 30 Amp
1 x	F3A carbon 75 mm spinner for Hacker C-50
2 x	Blade holder lower
1 x	Spinner INOVA 102 mm Black
1 x	Servo Fork
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner INOVA 45 mm White
1 x	51 mm INO spinner (carbon imitation)
1 x	Cono NUT 5/16"x 24 -M4
1 x	Extension 30 cm (Futaba)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	SPARK Switch 5.9v
1 x	Futaba male 40 cm extension
2 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Male connector for 20 pines AWG
1 x	Charger 220/110v
1 x	Motor holder AXI
1 x	XPower XC4226/12 LS
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Fiberglass motor-holder for electric motors
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller MENZ-S 19x12
1 x	Propeller MENZ-S 16x8 3-Blades
1 x	MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS)
1 x	AXI 2826/6 V2
1 x	Propeller MASTER 6x4
1 x	Powerset FunJet 2 with Vectorcontrol unit
1 x	9x7 tree blades propeller
1 x	Propeller MENZ-S 20x8
1 x	Propeller POWER-PROP 16x10
1 x	26x16D BIELA 3Bl propeller (3-blades)
1 x	Propeller MENZ-S 17x10
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	Extension 2/3 lipos JST/C
1 x	Motor OS 3820-1200 electric
1 x	57 mm INO spinner (carbon imitation)
1 x	LOWER TOW HOOK
1 x	Size "M" motor holder for class 600
1 x	Central support Speed 600
1 x	Cooler motor type 400
1 x	FOXY G2 C3530-700
1 x	Extension silicon 25 cm (Graupner)
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 10x7 SF
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 10x4.5 MR
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 12x6 Electric
1 x	12x6 tree blades propeller
1 x	Motor A200-6
1 x	Motor B20-10 L + 4:1 gearbox
1 x	AXI 2826/12 V2
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Propeller POWER-PROP 11x8
1 x	PYRO 600-11
1 x	Axle for motor A20-S (3 uds)
1 x	Vess propeller 11x7 S
1 x	18x10 BIELA propeller SCALE (3-blades)
1 x	Motor Mega AC 16/30/01
1 x	XH male balance (2S) connector (2 pcs)
1 x	Blades 330mm
1 x	Head spacer
1 x	Extension 5 lipos JST - JST/C
1 x	Tow hook for tug
1 x	SPS 70V 100/200 A
1 x	63 mm INO spinner (carbon imitation)
1 x	Motor mount for 1200 mm models
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Electric coversion set
1 x	A60 Motor Mount Alu complete set
1 x	Size "M" motor holder for class 400
1 x	Cooler motor type 280
1 x	XPower XC5030/14 LS
1 x	Size "L" motor holder for class 600
1 x
1 x	Frontal support Speed 600
1 x	Metalic motor holder for class 550-600
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	A50 Motor Mount Alu complete set
1 x	Motor XPOWER F2919/10 F5J Light
1 x	Frontal support Speed 280
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 50 cm (Futaba)
1 x	Propeller APC 11x3.8 SF
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller APC 11x5 Glow/Gas
1 x	Propeller APC 10x6 Glow/Gas
1 x	Propeller APC 11x4.7 SF
1 x	Propeller APC 10x4.7 SF
1 x	Propeller APC 11x7 Electric
1 x	Propeller APC 10x4.5 MR Electric Pusher
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 10x7 Glow/Gas
1 x	Propeller APC 12x10 Glow/Gas
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 12x4.5 MR Electric Pusher
1 x	Propeller APC 10x4.7
1 x	Propeller APC 12x3.8 SF
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 12x4.5 MR
1 x	Propeller APC 10x7 Electric
1 x	Fibreglass-Spinner BS ∅155 x 200 mm
1 x	Propeller MASTER 5,5x4,5
1 x	AXI 2820/8 V2 Long
1 x	PYRO 750-50L Competition
1 x	Motor HP 220/30/A3 P4 5:1
1 x	EVP Unit for AXI2208/xx and 2212/xx
1 x	Axle for AXI 4130 V2 motors
1 x	Propeller MENZ-S 18x12
1 x	Axle for AXI 5330/xx motors
1 x	Propeller VESS 32A
1 x	Propeller POWER-PROP 15x8
1 x	Propeller POWER-PROP 12x8
1 x	Motor A30-12 XL Glider
1 x	AXI 2820/10 V2
1 x	PYRO 650-53L EJE LARGO
1 x	Circlick securite
1 x	AXI 2826/8 V2 Long
1 x	MultiLog Altimeter
1 x	Propeller MASTER 5,5x4
1 x	KIRA 480-43
1 x	FALCON 28X10 CARBON PROPELLER (GAS)
1 x	KIRA 480-26 5,2:1
1 x	Propeller MENZ-S 15x8 3 blades
1 x	Axle for AXI 28269/xx motors
1 x	Combo AM480 T-Motor 650 Kv
1 x	CC 03
1 x	Propeller MASTER 6x3
1 x	Shaft for A60-L (140mm)
1 x	Propeller MENZ-S 21x12
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	PYRO 650-103 Long Axi
1 x	Motor A20-26 M EVO
1 x	PYRO 900-52L
1 x	PYRO 700-45 Long Axi
1 x	AXI 2814/10 V2 Long
1 x	AXI 2820/12 CYCLONE
1 x	Propeller MENZ-S 16x6 3-Blades
1 x	Propeller MENZ-S 15x12
1 x	Axle for AXI 2217/xx motors
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	Bearing 698-2Z for AXI 5330/xx
1 x	Motor A20-22 L EVO
1 x	Propeller MENZ-S 20x12 3 blades
1 x	Propeller MENZ-S 19x10
1 x	3-blades 16x10 carbon prop Super Silence
1 x	8 mm Adapter for AXI53xx
1 x	Propeller MASTER 7x4
1 x
1 x	Propeller MENZ-S 16x10
1 x	Motor A40-10S V4 14-Pole
1 x	Axle for AXI 2820/xx motors
1 x	AXI 2826/10 V2
1 x	Propeller POWER-PROP 14x8
1 x	PYRO 800-48 Long Axi
1 x	Propeller MENZ-S 20x6
1 x	Axle for AXI 2814/xx motors
1 x	Shaft for A60-L V4
1 x	Motor A50-10L Turnado V3 Glider
1 x	Axle for motor A30-XL V2
1 x	Backmountset complete A40
1 x	Motor A20-20 L EVO
1 x	AXI 2808/16 V2 Long
1 x	Motor A50-14 L 8-Polos Electric turbine
1 x	Vess propeller 12x7 S
1 x	24x14 prop Super Silence
1 x	16x8 BIELA propeller (3-blades)
1 x	MPS Gas-Cap-Powerswitch
1 x	22x12 BIELA propeller (3-blades)
1 x	17x10 BIELA propeller SCALE (3-blades)
1 x	Program card KAVAN PRO
1 x	20x10 BIELA propeller (4-blades) Corsair Scale
1 x	26x12D BIELA 3Bl propeller (3-blades)
1 x	25x10 BIELA propeller (3-blades) Corsair Scale
1 x	23x8 BIELA propeller
1 x	Motor Mega AC 16/07/03
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	24x10 BIELA Sport 3Bl propeller (3-blades)
1 x	21x12D BIELA propeller (3-blades)
1 x	23x10 BIELA propeller (4-blades) Scale
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Motor Mega AC 16/07/04
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 22/35 4S
1 x	Motor KAVAN PRO 2225-1600
1 x	17x8 BIELA propeller
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	26x18 BIELA propeller
1 x	Motor Mega AC 16/15/07 COMBAT

17,651.20EUR