Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV32.31035

13.76EUR

Program card KAVAN PRO
[KAV32.31035]

Tarjeta programadora KAVAN PRO

Programming card with LED display for KAVAN PRO series ESCs (also compatible with FOXY G2 controllers).
The LED programming card for KAVAN PRO series ESCs (also compatible with FOXY G2 ESCs) for aircraft is used for easy and fast programming of ESCs - at home "on the table" as well as at the airport. The ESC is connected via a servo cable, the socket is located on the top of the box. The power supply of the card is provided by the BEC stabilizer power supply of the KAVAN PRO ESC or by a common 4-5 cell NiCd/NiMH or 2S LiPo/LiFe receiver battery connected to the box (in case of the OPTO ESC). Programming is done with both motor and drive battery connected (also in case of OPTO ESCs).
WARNING: The KAVAN PRO LED programming card cannot be used to program the first generation FOXY ESCs and the first generation FOXY programming card cannot be used to program the KAVAN PRO ESCs.
The KAVAN PRO air ESCs can be programmed in a model with a propeller mounted - for safety reasons, however, we still recommend removing the propeller when programming - this will prevent a possible accident in the event of an omission or operator error. Similarly, program ESCs in cars and boats safely perched on a stand with the wheels or propeller in the air or with the pinion or propeller shaft coupling removed.
Four buttons on the front panel of the card are used for programming. Use them to select the program functions ("ITEM") for setting and to set their value ("VALUE"). The "OK" button confirms the change and sends it to the ESC, the "RESET" button is used to clear all settings and return all values to the factory default settings. The program function number is displayed on the left on the two-digit LED display ("ITEM"), the function value is displayed on the one-digit LED display on the right ("VALUE").
The method of connecting the ESC to the LED programming card depends on the type of ESC - it varies depending on whether it is a BEC ESC with a power supply stabilizer or an OPTO ESC. When wiring, follow exactly the instructions supplied with the card and your ESC.
A list of functions and adjustable values is provided on the label on the card; a detailed description of the functions is provided in the manuals supplied with the FOXY G2 ESCs.
Programming card kit includes: KAVAN PRO LED programming card, three-wire programming cable, instructions.
Supply voltage [V]: 4.8 - 8.4 ; Lenght [mm]: 88 ; Width [mm]: 58 ; Height [mm]: 14 ; Weight [g]: 40
Power supply [V] 4.8 - 8.4
Length [mm] 88
Width [mm] 58
Height [mm] 14

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	5 LiPo XH>EH adapter
1 x	BEC 3A FOXY
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	CC 01
1 x	USB HLS prog. interface
1 x	4 LiPo XH>EH adapter
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	JETImodel SINGLE BEC
1 x	CC 02
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	CC 05
1 x	MPX-Dean "T" Adapter
2 x	CC 03
2 x	APM2.6 Power module with 5.3V DC BEC
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Adapter lead MPX/EC3
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 30 cm male (Graupner)
3 x	89 mm aluminium spinner.
1 x	Optical RPM Sensor
2 x	45 mm aluminium spinner (Kavan)
1 x	Premium servo extension 25cm
3 x	38 mm aluminium spinner.
1 x	Extension silicon 30 cm male (Futaba)
1 x	200 mm extensión servo HITEC/JR
1 x	Premium servo extension 75cm
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x	SIMtransmitter 6 Mode 2
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Interface Realflight Simulator
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
3 x	Slave-cable USB Easy Sim
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
3 x	RF9 Flight Simulator with Spektrum Controller
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Spinner propeller pleg. 42 mm/6,0 mm/0º
1 x	CM-3
2 x	MPS Gas-Cap-Powerswitch
2 x	SBEC 30 D
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x	Male connector for 16 pines AWG
1 x	Spinner Alumin. propeller pleg. 30 mm / 5,0 mm
1 x	Central piece 52 mm + 2,5º
1 x	Opto Gas Engine Kill Switch
1 x	Multi-adapter balancer JST/C - TP
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	DYNAMOMETER S-1580
2 x	95 mm aluminium spinner.
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	3D Spinner for DLE 30
1 x	55 mm aluminium spinner (Kavan)
1 x	10 mm aluminium spinner (Kavan)
1 x	76 mm aluminium spinner.
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	Support hands Issuer PROFI TX
1 x	Potenciometro micro
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Motor 2212 (1000KV) Quadcopter F450
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Chopped glass fibre strands 3 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	GameCommander USB Universal
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
2 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	Glass fabric 25 g (2 m²)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Connector Sub-D 2+5 Female
1 x	Spinner 3BL propeller pleg. 65 mm / 4,0 mm
1 x	Spinner 3BL propeller pleg. 40 mm / 6,0 mm
2 x	Spinner 3BL propeller pleg. 42 mm / 5,0 mm
1 x	Spinner 3BL propeller pleg. 42 mm / 4,0 mm
1 x	Spinner propeller pleg. 33 mm / 5,0 mm
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	Spinner 3BL propeller pleg. 65 mm / 6,0 mm
1 x	Spinner fold propeller 36 mm (white spare spinner)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Extension 5 lipos JST - JST/C
1 x	30 cm BEC cable (male)
1 x	2 LiPo XH>EH adapter
1 x	Extension 2/3 lipos JST - JST/C
1 x	Spinner propeller pleg. 33 mm / 6,0 mm
1 x	Spinner propeller pleg. 30 mm / 5,0 mm
1 x	Spinner propeller pleg. 38 mm / 3,17 mm
1 x	Spinner fold propeller 50 mm (white spare spinner)
1 x	Spinner black 40-45mm
1 x	Spinner propeller pleg. 40 mm / 2,0 mm
1 x	Spinner propeller pleg. 36 mm / 4,0 mm
1 x	Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm
1 x	Spinner plastic balck propeller pleg. 30 mm / 3,2
1 x	Spinner 3BL propeller pleg. 42 mm / 6,0 mm
1 x	Spinner plastic red propeller pleg. 30 mm / 3,2
1 x	Spinner propeller pleg. 36 mm / 6,0 mm
2 x	Spinner propeller pleg. 30 mm / 3,17 mm
1 x	Spinner 3BL propeller pleg. 65 mm / 4,0 mm
1 x	Spinner propeller pleg. 38 mm / 6,0 mm
1 x	Spinner propeller pleg. 38 mm / 4 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner propeller pleg. 30 mm / 6,0 mm
1 x	Spinner fold propeller 50-55 mm (white spare spinner)
1 x	Carbon plate 350x150x1.0 mm
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Dummy motor GPW Wasp Scale 1/4
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	BETA 1400 ARF Red
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Chopped glass fibre strands 3 mm
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	PROFI TX fastening rings
1 x	COPILOT Multiplex
1 x	Cierva C30 Body Spain
1 x	Propeller CFK 18x19
1 x	Propeller CFK 15x16
1 x	Propeller CFK 15x13 Slim
1 x	Propeller CFK 16x16 Wide
1 x	Propeller CFK 15x13
1 x	Motor OS 3820-1200 electric
1 x	Spinner propeller pleg. 42 mm / 5,0 mm
1 x	KIRA 600-16
1 x	Motor Mega AC 16/25/02
1 x	AXI 2820/10 V2
1 x	KIRA 600-20
1 x	AXI 2826/12 V2 Long
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	AXI 2217/20 V2 Long "F5J"
1 x	Axle for motor A30-XL V2
1 x	Adaptador equilibrador HITEC (XH)
1 x	Head lower part
1 x	Complet landing gear
1 x	Baal link 4/14/4 (5 pcs)
1 x	Blades 330mm
1 x	LA500 Blades
1 x	Propeller CFK 16x13
1 x	Propeller RF CFK 13x7
1 x	Propeller CFK 14x7
1 x	Propeller CFK 14x8
1 x	GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C
1 x	Motor Mega AC 16/25/01E 3.17mm
1 x	PYRO 900-52L
1 x	AXI 2808/20 V2 Long
1 x	Frontal Adapter for AXI53xx

12,967.10EUR