Inicio » Catálogo » Motores y Turbinas » Eléctricos » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
  Eléctricos->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Escobillas->
    Accesorios
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

SAVAGE Max Red 1080 mm
129.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Tuerca autoempotrable M4 (4 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Tuerca autoempotrable M2 (10 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Tornillo M3x0,5x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
2 x	Tuerca autoblocante M2 aluminio azul (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
2 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado azul (4 pcs
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
2 x	Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
2 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
4 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado rojo (4 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
2 x	Tuerca autoempotrable M5 (4 pcs)
2 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
2 x	Arandela conica alumino M3 azul (8 pcs)
2 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
2 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
3 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Tornillo M2x8 (10 pcs)
1 x	Arandela 4.3 mm (20 pcs)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Tuerca hexagonal M2.5 (10 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Tornillo M2.2x9.5 (10 pcs) Especial cabinas, tapas servos
2 x	Tuerca hexagonal M3 (10 pcs)
1 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Tornillo allen M3x9 mm (4 pcs)
1 x	Circlick para eje 1.9 mm (10 pcs)
1 x	Arandela dentada 4.3 mm (20 pcs)
2 x	Tornillo M2.5x10 (10 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Tornillo M2.9x13 (10 pcs) Especial cabinas, tapas servos
2 x	Tuerca hexagonal M4 (20 pcs)
1 x	Tornillo M2x6 (10 pcs)
1 x	Tornillo M2.2x6.5 (10 pcs) Especial cabinas, tapas servos
1 x	Arandela M3 negra (4 pcs)
2 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Tornillo M2x16 PH
1 x	Tornillo M2x6 PH
2 x	Tuerca hexagonal M4 (10 pcs)
2 x	Arandela dentada 3.2 mm (20 pcs)
2 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Tornillo M2x8 PH cabeza abellanada
1 x	Tornillo M2x8 PH
1 x	Paracaídas PV6 para F3J
1 x	Aramid 50 daN 50 m
1 x	Paracaídas P4
2 x	Catapulta Vasa model
2 x	Bungee HLG Premium
1 x	Camara 800 TVL CMOS para FPV
2 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Listón de NOGAL 2,0x2,0x1000 mm
2 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Liston de BALSA 8,0x8,0x1000 mm
1 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Listón de TILO 3,0x3,0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
2 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Gorra Jeti Negra
2 x	Listón de PINO 10x10x1000 mm
2 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
2 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
2 x	Liston de BALSA 6,0x6,0x1000 mm
2 x	Listón de NOGAL 1,5x1,5x1000 mm
2 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
1 x	Listón de PINO 5,0x5,0x1000 mm
2 x	Listón de HAYA redondo 10 mm x 1000 mm
2 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Prolongador 30 cm (Futaba)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
2 x	Medidor angulos tamaño pequeño
1 x	Soporte para aviones
1 x	Prolongador cable servo POWERBOX 75cm
1 x	Soporte para aviones SebArt
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
1 x	Prolongador 100 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	Medidor angulos y/o incidencias
1 x	Prolongador silicona 100 cm (Graupner)
2 x	Prolongador S-Bus JR/JR 10cm
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Soporte WingFix ULTRA BE
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
2 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Carro remolque para veleros 720 x 239 mm
2 x	Prolongador cable servo POWERBOX 100cm
1 x	Prolongador PVC 150 cm (Graupner)
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Medidor de incidencias
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Prolongador cable servo POWERBOX 25cm
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
2 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Prolongador 90 cm (Futaba)
1 x	Cable silicona "Y" 30 cm (Graupner)
2 x	Equilibrador hélices
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Prolongador 7.5 cm
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Equilibrador hélices
2 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Prolongador 15 cm (Futaba)
1 x	Motor DLE 170 M - Paramotores
1 x	Rótula con rodamiento M2 22x5,5
1 x	Cera desmoldeante 250ml
1 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
2 x	Tuerca autoblocante M2 (20 pcs)
2 x	Tuerca hexagonal M2 (10 pcs)
1 x	Tornillo M3x0,5x12 mm Cabeza Plana Titanio (4 pcs)
2 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tuerca autoblocante M4 aluminio azul (4 pcs)
1 x	Tornillo allen M2.5x20 (10 pcs)
1 x	Plancha contrachapado "Economy" 600x300x6,0 mm
2 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Plancha de balsa 1,0x100x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Listón de BALSA 3,0x5,0x1000 mm
2 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Plancha de balsa 4,0x100x1000 mm
1 x	Batería Sanyo Eneloop RX 6,0 V JR
1 x	Manga de fibra de vidrio Ø 20 mm x 20m
1 x	Fibra de vidrio 163 g/m² 1 m x 50 m (Aero, finish FK 144, plain)
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x	Fibra de vidrio 163 g/m² 1 m x 10 m (Aero, finish FK 144, plain)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Batería Sanyo Eneloop TX 9,6 V Futaba
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
2 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Medidor ángulos
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Bateria RX JETI LiIon RB 3100 7.2v
1 x	Circlick seguridad
1 x	Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 5 m
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Hoja Depron Aero 1250x800x3 mm
1 x	Prolongador Futaba macho 40 cm de silicona
1 x	Prolongador silicona 50 cm (Futaba)
1 x	Prolongador silicona 35 cm (Futaba)
1 x	Extension silicona 30 cm macho (Futaba)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Cables para el motor AC 28/7
1 x	Soporte frontal para Speed 600
1 x	Bancada receptor (Azul)
1 x	Soporte metálico para motores clase 550-600
1 x	Disipador motor tipo 400
1 x	Placa de montaje Ø 39 mm para motores eléctricos
1 x	Tuerca autoempotrable M4 (10 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Círculo autoadhesivo 15 mm (30 pcs)
1 x	Antena helicoidal RHA 5.8 GHz (SMA plug) 12 dBi
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Hélice 8x4,3 SlowFlyer

8,562.75EUR