Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX backpack for Jeti DS handheld transmitter
58.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Dust collector for mould cleaning
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Xplorer4 anemometro
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Digital precision scale up to 2000 g
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Baseplate servo
1 x	Oils Pumps Empty (1 liter)
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Vasa model Catapult
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	20x1000 mm Ring Strap Back To Back
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x
2 x	Tape GFK 25 mm
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Foil for sticking flaps and ailerons
1 x	Round Rod 1,25x1000 mm
1 x	Flap hinge (6 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	18 mm reinforced hinge
2 x	Nylon hinge 20x20x0,3 (10 pcs)
3 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Universal Colour Paste deep black 250 g
1 x	Ply-Span 450x600/13g White
1 x	Oratex Natural White 2m
1 x	Oratex White 2m
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	DYNAMOMETER S-1580
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Spinner INO 75 mm Chrome (Imitacion metal)
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Carburator Moki S400
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	F3A carbon 95 mm spinner
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Fuel tank 1500ml (50oz)
1 x	Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x	Aluminum Fold Prop Spinner 40 mm / 5mm
1 x	Extension Arm for Carburetor (red)
1 x	28x5 mm wires output (2 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	89 mm INO spinner (carbon imitation)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	550 cc gasoline fuel tank complet
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	Aluminum Fold Prop Spinner 30 mm / 5.0 mm
2 x	DLE Ignition unit
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Motor OS 3820-1200 electric
1 x	Crystal Universal RX 35.150 Ch 75
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	"Taxi Tank" Fuel Tank
1 x	O-Ring SAITO FG-90 R3
1 x	LiPo Storage Box Standard 1 Type 1
1 x	O-ring Saito FG-73 5cyl
2 x	Long pinned hinge (6 uds)
1 x	Cut tube
1 x	Copier 2x20 cm pcs
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Straightened threaded rod M3 - 1m
1 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Gates hinge
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	RCEXL Electronic ignition twin A-02
1 x	TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Bungee HLG Premium
1 x	Spikes Band (5 m)
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	SE Ring 400 mm (2 pcs)
2 x	Marker ties (20 pcs)
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Round Rod 2,0x1000 mm
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	SE Ring 250 mm (2 pcs)
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	Suction funnel for carburetor 90D-M (red)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Cinta Goldfix 1m
1 x	Reed valve for DA 50-R
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Ball Bearings for motor A60-V2
1 x	SAITO FG-36 carburetor
1 x	Tape GFK 38 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Miniature brass strap hinge, 1 m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Propadapter for motor A60-V2
1 x	Compact on-board starting system (9525)
1 x	Propeller Pleg CAM Carbon 11x5
1 x	Propeller Pleg CAM Carbon 13x5
1 x	Propeller Pleg CAM Carbon 13x6.5
1 x	Propeller diller 5/6,3/8/9
1 x	1/12 Pilot "Fighter"
1 x	Propeller Pleg CAM Carbon 14x9
1 x	Propeller Pleg CAM Carbon 12.5x9
1 x	9x4.7 * 22x12 carbon propeller

5,589.58EUR