Call for Price

PBS TJ 100 Turbine
[PBSTJ100]


PBS TJ 100 Turbine
Jet Engine PBS TJ100

The PBS TJ100 jet engine was developed for unmanned aerial vehicles (UAVs), target drones, light sport aircraft and gliders with an additional engine.
Compact design
Excellent thrust-to-weight ratio, low power consumption
The built-in starter-generator allows a reliable start, power supply to the deck network and engine cooling when standing still
Modification according to customer's wishes (adjustment of hinges, the length of the outlet nozzle, possibility of landing on water)

The PBS TJ100 is the most popular of PBS's turbojet engines. It has achieved worldwide success, having been sold in over 40 countries. It is currently in use in over 1,000 applications around the globe and continues to bring great pride to the company. The turbojet engine is sought after for its compact design and excellent thrust-to-weight ratio as well as its ability to restart on the ground or in-flight and has the possibility of salt water recovery.
According to PBS standards, the PBS TJ100 is constantly being innovated and has even inspired new developments such as PBS TJ150 (the most powerful turbojet engine from PBS). All aircraft engines are built and measured using 3D measurement of parts and assemblage.
Its advantage is its compact design, low weight with a thrust of up to 1,250 N, and low fuel consumption in the given power category. The generator output is 750 W. One of the PBS TJ100 jet engine versions enables landing on water. The PBS TJ100 engine is a single-shaft small jet engine consisting of a radial compressor, radial and axial diffuser, annular combustion chamber, axial turbine and a fixed outlet nozzle.

Technical parameters

Max. thrust 1,250 N* 292 lbf
Outer diameter 272 mm 10.7 in
Length 625 mm 24.6 in
Weight 19.5 kg 43 lb


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
2 x ABS angle 10,0x10,0x1000 mm
2 x Profile ABS half cane 2.0x1000 mm
1 x Profile ABS half cane 7.0x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
2 x ABS "T" angle 6.0x6.0x1000 mm
2 x Rubber profile 8-2 mm 2M
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
2 x ABS angle 4,0x4,0x1000 mm
2 x Profile ABS half cane 2.5x1000 mm
2 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
2 x Profile ABS Square 3 x 1000 mm
2 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x ABS "T" angle 8.0x8.0x1000 mm
2 x Profile ABS Square 4 x 1000 mm
2 x Profile ABS half cane 4x1000 mm
2 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Rubber profile 10-2 mm 2M
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
2 x Profile ABS Square 2 x 1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber rod 6.0 mmx1000 mm
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler M3 (10 uds)
2 x Ball link Aluminio M3 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
3 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x Z type of cable coupler Ø 1 (2 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
3 x Couple M4 for wire (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Slave-cable USB Easy Sim
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Motor DLE 430 cc - Paramotors
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Connector CAN 15
1 x Profile ABS half cane 5.0x1000 mm
1 x PowerBox PROFESSIONAL
1 x Mobile Terminal
1 x Motor holder for AC 28/7
2 x Cooler motor type 150
1 x Charger LiPo Charger4
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x CORTEX
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Carbon fiber rod 14 mmx1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Profile ABS half cane 8.0x1000 mm
1 x Rubber profile 6-2 mm 2M
2 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
2 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Opto Gas Engine Kill Switch
1 x Encendido CDI RCAME 1/4*32 Single 120º
2 x Recess mount-rem. glow plug set
1 x Electromotor starter EME 35cc
1 x Compact on-board starting system (9525)
1 x Compact on-board starting system (9512)
1 x GLOW 9C + accesories
1 x RCEXL Electronic ignition twin A-02
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x HBC 10035-3 32-Bit
1 x Hitec 25 mm servo arm with M3 ball link
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Screws M1,6x6 Allen
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Horns set HS-65HB/MG, 5065MG
1 x Servo GO-1013 MG 3.8kg
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x Servo arms set HS-65HB/MG/5065MG
2 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Bearing housing
1 x Savox Brushless Servo SC-1251 MG
1 x Servo SAVOX SA-1256 TG
2 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servoarm SH-81, two sides, aluminium
1 x Servo SAVOX SA-1258 TG
1 x Servo SAVOX SV-0236 MG HV
1 x SERVO DES 707 BB MG, Pignons
1 x Selfstarr EME35
1 x RCEXL Electronic ignition twin CM-6
1 x Starter EM Gear Power 250
1 x Starter EM Gear Power 80
1 x Steel Screw M1x8 (10 pcs)
1 x Rotor Mast
1 x Servos security connector (2 pcs)
2 x SAVOX SH 0255 MG servo
1 x Futaba 25 mm servo arm with M3 ball link
1 x Hitec 38 mm servo arm with ball link
1 x SERVO DES 658 BB MG
2 x Nut M1,6
1 x Balls 4 mm
1 x CC 11 Conector
1 x Servo mounting frame SV-1260MG
1 x Head lower part
1 x Servo arms set 40/50/55/5055 MG
1 x T-Motor U7-V2.0 Kv420
1 x Hitec 38 mm servo arm
1 x SERVO DES 806 Pignons
1 x SERVO DES 806 Pignons
1 x Rotorshape Autogyro
1 x Servo DL3017 Digi 17Kg-0.15s/60º
2 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Servo SAVOX SV-1270 TG
1 x Head lower part New
1 x Aluminium servo arm (2 uds)
1 x Nut M2 securing
1 x SAVOX SH 0254 servo
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
1 x SERVO DES 568 MG
1 x Futaba 38 mm servo arm
1 x Servo GO-02 Digital 1.8g
1 x Baering 3x8x4
1 x Head runner
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Servo Fork
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x A50 Motor Mount Alu complete set
1 x Fan for A60
2 x Cooler motor type 400
2 x 
1 x Crystal Universal RX 35.090 Ch 69
1 x Motor holder AXI
1 x Frontal support Speed 600
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Size "M" motor holder for class 400
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Indoor Brushed motor kit
1 x MAMBO 17
1 x Cooler motor type 300
2 x 
1 x Crystal Universal RX 35.140 Ch 74
1 x Crystal Universal RX 35.130 Ch 73
1 x Crystal Universal RX 35.030 Ch 63
1 x Crystal Universal RX 35.140 Ch 74
1 x Crystal Universal RX 35.020 Ch 62
1 x DPS Switch JR/JR
1 x MRPM-AC revolution sensor
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x DUPLEX 2.4EX MUI 75
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x DUPLEX 2.4EX MT 300 EX
1 x DUPLEX 2.4EX Expander E4
1 x DUPLEX 2.4EX MAlti (Rev.2)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Kwik link with arm M5xM2,5xL30
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Pulley brass 5/1,5 (2 pcs)
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Xoar Electric Beechwood Prop 21x10
1 x SAVOX SH 1290 MG servo digi
1 x Gear set HITEC D645 MW
1 x 46 mm Futaba servo arm tandem with ball link
1 x Servo HITEC D954 TW
1 x 24x12 BIELA 3Bl propeller (3-blades)
1 x Savox Brushless Servo SC-1267 SG
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Pulley brass 8/2 (2 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Threaded coupler M2 (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Metal clevis M3 (10 uds)
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Motor A2212/13T
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x DPSI RV Mini 5 (2008)
2 x Servo SAVOX SB-2290 SG
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Hitec 46 mm servo arm with ball link
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Manual Controller
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x 23x10 BIELA propeller
1 x Servo HITEC HS-225 MG
1 x 22x12 BIELA propeller (3-blades)
1 x Servo HITEC D645 MW
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Futaba 30 mm servo rounded arm
1 x Servo safety connector (10 pcs)
1 x Futaba 46 mm servo arm with ball link
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Servo HITEC HS-5585MH
1 x Hitec 20 mm servo arm
1 x ER40eVo set B (20 Kg)
1 x Propeller MASTER 6x3
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Cable coupler M2,5 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
14,188.67EUR
Manufacturers
Manufacturer Info
PBS
PBS Homepage
Other products
Languages
Español English
Currencies