Call for Price

PBS TJ 100 Turbine
[PBSTJ100]


PBS TJ 100 Turbine
Jet Engine PBS TJ100

The PBS TJ100 jet engine was developed for unmanned aerial vehicles (UAVs), target drones, light sport aircraft and gliders with an additional engine.
Compact design
Excellent thrust-to-weight ratio, low power consumption
The built-in starter-generator allows a reliable start, power supply to the deck network and engine cooling when standing still
Modification according to customer's wishes (adjustment of hinges, the length of the outlet nozzle, possibility of landing on water)

The PBS TJ100 is the most popular of PBS's turbojet engines. It has achieved worldwide success, having been sold in over 40 countries. It is currently in use in over 1,000 applications around the globe and continues to bring great pride to the company. The turbojet engine is sought after for its compact design and excellent thrust-to-weight ratio as well as its ability to restart on the ground or in-flight and has the possibility of salt water recovery.
According to PBS standards, the PBS TJ100 is constantly being innovated and has even inspired new developments such as PBS TJ150 (the most powerful turbojet engine from PBS). All aircraft engines are built and measured using 3D measurement of parts and assemblage.
Its advantage is its compact design, low weight with a thrust of up to 1,250 N, and low fuel consumption in the given power category. The generator output is 750 W. One of the PBS TJ100 jet engine versions enables landing on water. The PBS TJ100 engine is a single-shaft small jet engine consisting of a radial compressor, radial and axial diffuser, annular combustion chamber, axial turbine and a fixed outlet nozzle.

Technical parameters

Max. thrust 1,250 N* 292 lbf
Outer diameter 272 mm 10.7 in
Length 625 mm 24.6 in
Weight 19.5 kg 43 lb


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extractor piñones 2.3/3.2 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Spikes Band (5 m)
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x CM-3
3 x 5 LiPo XH>EH adapter
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cinta Goldfix 1m
1 x CC 02
2 x CC 01
1 x SE Ring 480 mm (2 pcs)
3 x TrainerCord (master-learner)
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x SE Ring 360 mm (2 pcs)
1 x Cabel charger transmitter GRAUPNER
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
3 x Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x Aluminum Bayonet / strongal D25 mm / 1 m
2 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x White silicone 0,25 qmm wire (100 m)
1 x White silicone 0,25 qmm wire (150 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x White silicone 0,25 mm² wire (25 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x 10m servo "Premium" wire (white/red/blue)
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Strip ABS 2.0x10.0x1000 mm
1 x SE Ring 200 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Male Prolonger TP 4/5S
1 x Extension 6 lipos XH > EH
1 x SE Ring 400 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Extension 5 lipos JST/C
1 x Cable set PREMIUM, fuselage/wing
1 x SE Ring 450 mm (2 pcs)
1 x JETImodel DPS 40
1 x SE Ring 250 mm (2 pcs)
2 x CC 05
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Connector Sub-D 2+5 Female
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Circlick securite
1 x JETImodel SINGLE BEC
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x 2 LiPo XH>EH adapter
1 x CC 03
1 x Male connector for 6 pines AWG
1 x Adapter lead MPX/EC3
2 x TP/TopFuel - XH 2/3S Adapter
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x 3 LiPo XH>EH adapter
1 x MPX-Dean "T" Adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 1000 ml sealer (DOPE)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Spray EC Red 400ml
1 x Partall paste 650 g
1 x Propeller balancer
1 x Presto SF Light Filler styrene-free (420 g)
1 x Blind nut M4 (10 pcs)
1 x T-shape holder metal LAMA
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Battery RX JETI LiIon RB 6200 7.2v
2 x Tester LiPo/LiIon/LiMn/LiFe
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x VTX 477 Carbon Rotorblade
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x 10 mm Quick clamp_L (6 pcs)
1 x Aluminium battery holder red
1 x Green silicone 0,25 mm² wire (25 m)
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Beech dowels 3.0 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Paint gun for sprays
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Angle measurer
1 x Field folding model stand SebArt
1 x 20 g tin paste
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Tape GFK 50 mm
1 x Tape GFK 25 mm
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x Spark Ceramic JETCENTRAL
1 x Spray adhesive AEROFIX 2
1 x Solvent Plasti Dip 1000 ml
1 x Canopy Latch
1 x Adjustable brass horn threaded M3
1 x 4 blades set
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x A50 Backmountset complete
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Extension 2/3 lipos JST - JST/C
1 x Axle for motor A20-S (3 uds)
1 x Cable adapter iCharger
1 x Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
4,097.98EUR
Manufacturers
Manufacturer Info
PBS
PBS Homepage
Other products
Languages
Español English
Currencies