Top » Catalog » Motors & Turbines » Turbines » kerosene » XICOY Turbine » XIX95C

2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]

Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
    kerosene->
      Accesories
      Jet Central Turbines
      KingTech Turbine
      Oil
      PBS Turbines
      Smoke
      Spare parts JETCENTRAL
      Turbinas Jetsmunt
      XICOY Turbine
    Electric->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Vasa model Catapult
1 x	Starter Sullivan-STAR 601
1 x	Ball Link Plier
1 x	Copier 5x20 cm pcs
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Vacuum pump 12 CFM
1 x	Vacuum pump P1-N
1 x	Crimping tool
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball Link Plier
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Hot Glue Stick BLACK
1 x	Hot Glue Stick GREEN
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Starter EM Gear Power 250
1 x	Digital scale up to 40 kg
1 x	Cut tube
1 x
3 x	Crimping tool
1 x	Digital precision scale up to 2000 g
1 x	Z Bender - S Type Tool
1 x	Starter 12v (Max 90 and 15ccm)
1 x	2,5x60 mm allen screwdriver
1 x	Starter EM Gear Power 80
1 x	Screwdriver for Hexagon 1,5mm
1 x	Z Bender - S Type Tool
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
2 x	EXTRA NG 74" yello/blue/red (Skywing RC)
2 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Turbina KINGTECH K320 G5
1 x	Extension MPX-MPX 20 cm
2 x	Interface Jack Adapter IKARUS
2 x	GameCommander USB Universal
4 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
4 x	SE Ring 300 mm (2 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Flap hinge (6 pcs)
3 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Micro flex hinge (12 uds)
2 x	Long pinned hinge (6 uds)
3 x	SE Ring 400 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	Small pinned hinge (12 uds)
4 x	Tape GFK 25 mm
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	SE Ring 450 mm (2 pcs)
3 x	Ring 320 mm length (5 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Gates hinge aluminium (1 pcs)
3 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Cinta Goldfix 1m
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
4 x	Tape GFK 50 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Precision wrench L100 mm
1 x	Handle for PERMAGRIT lime
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Oracover GREY Seafire Sea 2m
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Small flex hinge (12 uds)
3 x	Waterproof adhesive tape, width 19mm, length 25m
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Long pinned hinge (12 uds)
1 x	Small pinned hinge (6 uds)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 330 mm (4 pcs)
4 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
5 x	20x1000 mm Ring Strap Back To Back
3 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Indoor hinge with servo arm integraded
2 x	SE Ring 350 mm (2 pcs)
2 x	Spikes Band (5 m)
1 x	25 mm reinforced hinge
2 x	SE Ring 250 mm (2 pcs)
1 x	Miniature brass strap hinge, 1 m
3 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Split M1,2x10 (10 pcs)
1 x	Snap short M2 (10 uds)
1 x	Paramotor BackPack XXS (without accessories)
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 38 mm
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x	Foil for sticking flaps and ailerons
1 x	15 mm reinforced hinge
1 x
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Servo Dymond D 37 Eco
1 x	Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Telemetria XYCOY adapter
1 x	Turbina X132 H "Compact Version"
1 x	Turbina X132 H "Light Version"
1 x	Turbina XICOY X180 compact
1 x	Turbina XICOY X95 compact
2 x	Turbina X45 H "compact"
1 x	LOWER TOW HOOK
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Servo TT ACE SHV 1504 MG
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Servo GO-1053MG 20 kg.cm 0.17s/60º
1 x	Servo GO-10S41MG 10.5 kg.cm 0.075s/60º
1 x	Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x	F9F COUGAR Grey ARF 1.562 mm
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	HAWKER HUNTER 1:5,8 (1.770mm)
1 x	Tank Kevlar ASPIRE 6 L Kero
1 x	ASPIRE Red ARF 2.000 mm, Canopy
1 x	Bags de Luxe ODYSSEY
1 x	HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	Set Legs + Wheels with brake ASPIRE
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Aluminium sheet 500x250x0,5mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	30x14 prop Super Silence
1 x	Battery LiPo GENS 3300 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x	Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace)
2 x	SE Ring 240 mm (2 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	DEMON CORTEXpro
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	20x200 mm battery rings
1 x	29x12 prop Super Silence
1 x	Pin hinge 34x16 mm (10 uds)
1 x	20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Modulo reglaje avance V3
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one

36,360.33EUR